ACME Uploader II Bedienungsanleitung

CONTENTS

1. Safety Instructions..................................................................................2

2. Technical Specifications ..........................................................................2

3. Control Panel ..........................................................................................3

4. How to Use the Fixture...........................................................................4

4.1 Upload ..............................................................................................4

4.2 Upgrade via an SD Card.....................................................................4

4.3 DMX Test...........................................................................................6

4.4 DMX View.........................................................................................7

4.5 Normal Upgrade ...............................................................................8

4.6 Lock Upgrade ....................................................................................9

1. Safety Instructions

WARNING

Unpack and check carefully there is no transportation damage before using the unit.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

The unit is for indoor use only. Use only in a dry location.

Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

There are no user serviceable parts inside the unit. Do not open the housing or attempt any

repairs by yourself. In the unlikely event your unit may require service, please contact your

nearest dealer.

2. Technical Specifications

Power Voltage:

AC 100~240V, 50/60Hz

Power Consumption:

12.2W

Construction:

Display: LCD display

Battery Category: NI-MH battery

Battery capacity: 2000mAh

Accessories: Adapter/SD card

Features:

Universal DMX 512 control adaptable

Easily upgrade the software via IU-02 to the fixture, no need to change chips

3-pin & 5-pin XLR connecting to the fixture and USB connector

Please log in www.acme.com.cn to download the latest software

Please read the instructions carefully which includes important information

about the installation, operation and maintenance.

Charging Time to Full Hour:

3.5-4 hours

Working Hour:

6.5-8 hours

Temperature of Charging Time:

0~45℃

Dimension/Weight:

79 x 51 x 159 mm, 0.6kgs

3.1" x 2.0" x 6.3"in, 1.3lbs

3. Control Panel

1. LED:

DMX On DMX input present

Power(FULL) On Full power

Power(LOW) On Low power

Buttons:

2.MENU To select the programming functions

3. DOWN To go forward in the selected functions

4. UP To go backward in the selected functions

5.ENTER To confirm the selected functions

6. POWER IN (DC 9-12V): To connects to supply power

7. DMX OUT: For DMX512 link, use 3-pin XLR cable to link the next unit and output DMX signal

8. DMX OUT: For DMX512 link, use 5-pin XLR cable to link the next unit and output DMX signal

9. POWER SWITCH:Turns on/off the power

10. USB: No Function at the moment. Reserve for upgrade the software.

11. SD Card Slot: Insert the SD Card to upgrade the software

12. Display: To show the various menus and the selected functions

4. How to Use the Fixture

4.1 Upload

1. Put ACME software file with new version into the root directory of the SD card and rename

the file as upgrader.yfu.

2. Insert the SD card into the SD card slot of the Upgrader.

3. Turn on the power of the Upgrader and it will upgrade the self-software automatically.

4.2 Upgrade via an SD Card

Please upgrade the software by following the steps below:

1. Download ACME software from our website, insert the SD card into the computer and create

a new folder named “Firmware” in the SD card, then put ACME software file in this fo lder.

2. Power off the Uploader before inserting the SD card. Insert the SD card into the SD card slot of

the Upgrader and turn on the power switch, UPGRADER will be shown on the display (Figure

1).

Figure 1

3. Press the MENU button and the menu will be shown on the display (Figure 2), use the UP and

DOWN button to select the Firmware Upgrade. Press the ENTER button to confirm.

MainMenu

DMX Test

Firmware Upgrade

DMX View

Fixture Information

Figure 2

4. The name of the software file will be shown on the display (Figure 3), use the UP and DOWN

button to select the software file and press the ENTER button to confirm.

Figure 3

5. As shown in Figure 4 and Figure 5, when the upgrade process is displayed to 100%, it means

that the luminaire has completed the upgrade process.

Figure 4 Figure 5

4.3 DMX Test

1. Сconnect the unit to the fixture, switch on the unit (Figure 1).

Figure 1

2. Press the MENU button and the Main Menu will be shown on the display (Figure 2), use the

UP and DOWN button to select the DMX Test. Press the ENTER button to confirm.

MainMenu

DMX Test

Firmware Upgrade

DMX View

Fixture Information

Figure 2

3. Manual Test will be shown on the display (Figure 3), use the UP and DOWN button to select

the 001-512 channel and press the ENTER button to confirm.

Figure 3

4.4 DMX View

1. Connect the unit to the fixture, switch on the unit (Figure 1).

Figure 1

2. Press the MENU button and the Main Menu will be shown on the display (Figure 2), use the

UP and DOWN button to select the DMX V iew. Press the ENTER button to confirm.

MainMenu

DMX Test

Firmware Upgrade

DMX View

Fixture Information

Figure 2

3. The current mode will be shown on the display (Figure 3), Press the ENTER button to view the

DMX channel value (Figure 4).

Figure 3 Figure 4

4.5 Normal Upgrade

This mode is used for "one-to-one" or "one-to-many" upgrade

1. Link the fixture and the Uploader with 3-pin or 5-pin DMX cable, turn on the power of the

fixture and Uploader.

2. Switch on the Uploader, enter menu mode, use the UP/DOWN button to select "Firmware

Upgrade", press the ENTER button to confirm.

3. The Uploader will automatically search for the software file stored in the SD card, use the

UP/DOWN button to select the software file, press the ENTER button to confirm.

Note: Please select the correct software file and its version according to the fixture model, the

upgrade process can only be done when the software file is correctly selected.

4. Use the UP/DOWN button to set the upgrade speed (Fast / Slow), press the ENTER button to

confirm and the Uploader will start to upgrade the software.

Note: Normally, Fast speed will be selected to upgrade the software. When repeated failures

occurred, please change to Slow speed.

5. When the upgrade process is displayed to 100%, it means that the luminaire has completed the

upgrade process.

4.6 Lock Upgrade

This mode is used for "one to one" upgrade when the upgrade process is failed for many times.

1. Link the fixture and the Uploader with 3-pin or 5-pin DMX cable.

2. Switch on the Uploader, enter menu mode, use the UP/DOWN button to select " Firmware

Upgrade ", press the ENTER button to confirm.

3. The Uploader will automatically search for the software file stored in the SD card, use the

UP/DOWN button to select the software file, press the ENTER button to confirm.

Note: Please select the correct software file and its version according to the fixture model, the

upgrade process can only be done when the software file is correctly selected.

4. Use the UP/DOWN button to set the upgrade speed (Fast / Slow).

5. Turn on the power of the luminaire.

6. Press the ENTER button to confirm, the Uploader will start to upgrade the software.

Note: Normally, Fast speed will be selected to upgrade the software. When repeated failures

occurred, please change to Slow speed.

7. When the upgrade process is displayed to 100%, it means that the luminaire has completed the

upgrade process.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME LED-767 RGBW Bedienungsanleitung

ACME

ACME Solaris Bedienungsanleitung

ACME

ACME Splendor 220 II Bedienungsanleitung

ACME

ACME STAGE PAR 100 COLOUR IP Bedienungsanleitung

ACME

ACME Dynamic 25 Spin LED?GF25 Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME TRACK 10 Bedienungsanleitung

ACME

ACME DIABOLO 500 Bedienungsanleitung

ACME

ACME Warrior Scan 50 LED-SC50C Bedienungsanleitung

ACME

ACME LED-PS10D RGBW Bedienungsanleitung

ACME

ACME Energy Spot PRO Bedienungsanleitung

ACME

ACME BRIGHT Bedienungsanleitung

ACME

ACME CRUX Bedienungsanleitung

ACME

ACME LED-3082 RGB Bedienungsanleitung

ACME

ACME Glamour 350Z Bedienungsanleitung

ACME

ACME Thunderbreaker Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME MP-12FC Bedienungsanleitung

ACME

ACME IL-2420 II Bedienungsanleitung

ACME

ACME Sunrise Bedienungsanleitung

ACME

ACME LED-SC25 Bedienungsanleitung

ACME

ACME Andromeda Bedienungsanleitung

ACME

ACME LP-1600 BD30 Bedienungsanleitung

ACME

ACME LED-WAV-10W Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung