Advantech PCIE-1750U Bedienungsanleitung

User Manual

PCIE-1750U/UH

32-ch Isolated Digital I/O with

Digital Filter PCI Express Card

PCIE-1750U/UH User Manual ii

The documentation and the software included with this product are copyrighted 2019

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any on screen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Part No. 2001E17500 Edition 1

Printed in Taiwan February 2019

iii PCIE-1750U/UH User Manual

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class B

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful inter-

ference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Warnings, Cautions and Notes

Warning! Warnings indicate conditions, which if not observed, can cause personal

injury!

PCIE-1750U/UH User Manual iv

Document Feedback

To assist us in making improvements to this manual, we would welcome comments

and constructive criticism. Please send all such - in writing to: support@advan-

tech.com

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

15. The power cord or plug is damaged.

16. Liquid has penetrated into the equipment.

17. The equipment has been exposed to moisture.

18. The equipment does not work well, or you cannot get it to work according to the

user's manual.

19. The equipment has been dropped and damaged.

20. The equipment has obvious signs of breakage.

21. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

Caution! Cautions are included to help you avoid damaging hardware or losing

data. e.g.

There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer's

instructions.

v PCIE-1750U/UH User Manual

22. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

Safety Precaution - Static Electricity

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Follow these simple precautions to protect yourself from harm and the products from

damage.

To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the system board, the

CPU, or adapter cards while the PC is on.

Disconnect power before making any configuration changes. Avoid electrostatic

discharge. The sudden rush of power as you connect a jumper or install a card

may damage sensitive electronic components.

PCIE-1750U/UH User Manual vi

vii PCIE-1750U/UH User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Applications............................................................................................... 3

1.4 Installation Guide ...................................................................................... 3

1.5 Software Overview .................................................................................... 4

1.6 Accessories............................................................................................... 4

1.7 Ordering Information: ................................................................................ 4

Chapter 2 Hardware Installation ..........................5

2.1 Installation ................................................................................................. 6

2.2 Unpacking ................................................................................................. 6

2.3 Driver Installation ...................................................................................... 7

2.4 Hardware Installation ................................................................................ 7

Figure 2.1 Device Manager ......................................................... 8

Chapter 3 Signal Connections .............................9

3.1 Overview ................................................................................................. 10

3.2 Switch and Jumper Settings.................................................................... 10

Figure 3.1 Card layout of PCIE-1750U/UH................................ 10

Table 3.1: Summary of Jumper Settings (JP2).......................... 10

Table 3.2: Board ID setting (SW1)............................................. 11

3.3 Signal Connections ................................................................................. 12

Figure 3.2 Pin assignment of PCIE-1750U/UH......................... 12

Figure 3.3 Isolated DI Connection ............................................. 13

Figure 3.4 Sink type (NPN) connection ..................................... 13

Figure 3.5 Source type (PNP) connection ................................. 14

Figure 3.6 Wrong connection wouldn’t damage the IDO compo-

nent........................................................................... 14

Figure 3.7 Pin definition of CN2................................................. 15

Appendix A Specifications ....................................17

A.1 Specifications .......................................................................................... 18

A.1.1 Isolated Digital Input ................................................................... 18

A.1.2 Isolated Digital Output................................................................. 18

A.1.3 General ....................................................................................... 19

A.1.4 Digital Filter Time ........................................................................ 19

Appendix B Block Diagram ...................................21

B.1 PCIE-1750U/UH...................................................................................... 22

PCIE-1750U/UH User Manual viii

Chapter 1

1Overview

PCIE-1750U/UH User Manual 2

1.1 Introduction

The PCIE-1750U/UH is a series of 32-ch digital input/output card with PCI Express

interface.

The key feature this series provides is selectable NPN/PNP direction on digital out-

put function. Users can select the direction according to their needs, setting by soft-

ware APIs.

The digital filter PCIE-1750UH provides on every single channel is ideal for acquiring

digital signals in noisy environments. On the other hand, the interrupt function pro-

vided on each channel gives not only a way monitoring the DI status instead of soft-

ware polling to save computing resources, but also a better real-time performance.

The following sections will describe further information about features and installa-

tion, along with some brief instruction on software and accessories for the PCIE-

1750U/UH card.

1.2 Features

PCIE-1750U/UH

16-ch isolated digital input

16-ch isolated digital output with software configurable both PNP (source)/ NPN

(sink) type

High output driving capacity

Interrupt handling capability for all DI channels (PCIE-1750UH only)

Selectable digital filter time for all DI channels (PCIE-1750UH only)

High isolation voltage (2,500 VDC)

The Advantech PCIE-1750U/UH offers the following main features:

Robust Protection

The PCIE-1750U/UH digital input channels feature robust isolation protection for

industrial, lab and machinery automation applications. It durably withstands voltage

up to 2,500 VDC, preventing your host system from any incidental harm. If connected

to an external input source with surge-protection, the PCIE-1750U/UH can offer up to

a maximum of 2,000 VDC ESD (Electrostatic Discharge) protection. Even with an

input voltage rising up to 70 VDC, the PCIE-1750U/UH can still manage to work prop-

erly, albeit only for a short period of time.

Wide Input Range

The PCIE-1750U/UH has a wide range of input voltage from 10 to 30 VDC, and is

suitable for most industrial applications of 12 VDC or 24 VDC input voltage.

Plug-and-Play Function

The PCIE-1750U/UH is a Plug-and-Play device, which fully complies with PCI

Express Specification Rev V1.0. During card installation, there is no need to set

jumpers or DIP switches. Instead, all bus-related configurations such as base I/O

address and interrupt are automatically done by the Plug-and-Play function.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Advantech PCI-Karte Handbücher

Advantech

Advantech MIC-3451 Bedienungsanleitung

Advantech

Advantech PCI-1761 Bedienungsanleitung

Advantech

Advantech PCIE-1760 Bedienungsanleitung

Advantech

Advantech PCI-1752U Bedienungsanleitung

Advantech

Advantech PCIE-1752 Bedienungsanleitung

Advantech

Advantech B+B SmartWorx McPC/Giga-MediaLinX Bedienungsanleitung

Advantech

Advantech PCI-1202 Bedienungsanleitung

Advantech

Advantech MIC-3758DIO Bedienungsanleitung

Advantech

Advantech MIC-5602 Bedienungsanleitung

Advantech

Advantech PCI-1737U Installations- und Betriebshandbuch

Advantech

Advantech PCI-1612B Betriebsanleitung

Advantech

Advantech PCI-1742U Bedienungsanleitung

Advantech

Advantech PCLD-8811 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6184VE Bedienungsanleitung

Advantech

Advantech PCM-28P1AD Installations- und Betriebshandbuch

Advantech

Advantech PCIE-1754 Bedienungsanleitung

Advantech

Advantech ARK-5261 Installations- und Betriebshandbuch

Advantech

Advantech PCI-1240 Bedienungsanleitung

Advantech

Advantech DVP-7636HE Bedienungsanleitung

Advantech

Advantech DVP-7014HE Bedienungsanleitung

Advantech

Advantech PCI-1762 Bedienungsanleitung

Advantech

Advantech PCLS-848-P Bedienungsanleitung

Advantech

Advantech PCI-1730U Bedienungsanleitung

Advantech

Advantech PCIE-1765 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung