AFe Power Takeda 56-10005D Bedienungsanleitung

advanced FLOW engineering

Instruction Manual P/N: 56-10005D / 56-10005R

Make: Hyundai Model: Elantra Sport Year: 2017-2020 Engine: L4-1.6L Turbo

Make: Hyundai Model: Elantra GT Sport Year: 2018 Engine: L4-1.6L Turbo

Make: Hyundai Model: Elantra GT N Line Year: 2019-2020 Engine: L4-1.6L Turbo

Make: Hyundai Model: Veloster Year: 2019-2020 Engine: L4-1.6L Turbo

Make: Kia Model: Forte GT Year: 2019-2020 Engine: L4-1.6L Turbo

Label Qty. Description Part Number

A1 1 Air Filter (Pro DRY S) 21-91108 (Grey Media)

A2 1 Air Filter (Pro 5R) 24-91108 (Blue Media)

B 1 Tube 05-5610005B1

C 1 Housing 05-5610005B2

D 1 Coupling, Silicone Reducer 05-01490

E 1 Clamp, #044 03-50019

F 2 Retainer Clips 03-50616

G 1 Clamp, #048 03-50007

H 1 Fitting 03-50615

I 1 Threadlocker 03-50162

J 1 Seal, Trim: 7/16" (25" inches) 05-00072

Installation will require the following tools:

8mm and 10mm socket, extension, ratchet, 16mm wrench, pliers and ﬂat-head screwdriver.

• Please read the entire instruction manual before proceeding.

• Ensure all components listed are present.

• If you are missing any of the components, call customer support at 951-493-7185.

• Ensure you have all necessary tools before proceeding.

• Do not attempt to work on your vehicle when the engine is hot.

• Disconnect the negative battery terminal before proceeding.

• Retain factory parts for future use.

Page 2

Retain factory parts for future use.

Emissions Disclaimer:

This product is not currently CARB exempt and is not available for purchase in California or for use on any

vehicle registered with the California Department of Motor Vehicles.

aFepower.com

Page 3

A1/A2

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF

ADVANCED FLOW ENGINEERING, INC. ANY REPRODUCTION IN PART OR IN WHOLE WITHOUT

THE WRITTEN PERMISSION OF ADVANCED FLOW ENGINEERING, INC. IS PROHIBITED.

SHEET 1 OF 1

advanced FLOW engineering, inc.

P.O. BOX 1719

CORONA, CA 92878-1719

(951) 493-7100 / (951) 493-7177 FAX

ThreadLocker

"Drawn"

1:2

APPROVED

DRAWN

REV.

DWG. NO.

CAD FILE:

SIZE

SCALE:

Refer to Figure A for Steps 1-3

Step 1: Remove the engine cover by pulling upward on it.

Step 2: Using pliers, open the clamp securing the hose to the air intake tube, and then slide the clamp

away from the intake tube. This clamp will be re-used. Disconnect the rubber hose from the air

intake tube.

Step 3: Release the two clips securing the top of the airbox to the bottom of the airbox.

REMOVAL

Page 4

Figure A

Refer to Figure B for Steps 4-5

Step 4: Using pliers, open the clamp securing the small hose to the air intake tube toward the ﬁrewall.

Slide the clamp away from the tube and disconnect the small rubber hose from the intake tube.

The clamp will be re-used.

Step 5: Loosen the clamp at the turbo inlet using a 10mm socket and ratchet.

aFepower.com

Page 5

REMOVAL

Figure B

Refer to Figure C for Step 6

Step 6: Remove the top of the factory airbox and the tube as one piece from of the vehicle.

Page 6

Figure C

REMOVAL

Refer to Figure D for Steps 7-9

Step 7: Remove the two plastic rivets connecting the factory air inlet to the front of the car. Use a

ﬂat-head screwdriver to press down on the center of the rivet to unlock, and then pull them out.

These plastic rivets will be replaced.

Step 8: With a 10mm socket, extension and ratchet, loosen the three bolts securing the factory

housing to the vehicle. These three bolts will be re-used during the installation of the Takeda

air intake system.

Step 9: Remove the bottom of the factory housing and air inlet as one piece out of the vehicle.

Figure D

aFepower.com

Page 7

REMOVAL

Page 8

Page

Refer to Figure E for Step 10

Step 10: Transfer the three mounting grommets and sleeves from the bottom of the factory housing

to the Takeda housing.

Figure E

INSTALL

Page 9 aFepower.comaFepower.com

Page

Refer to Figure F for Step 11

Step 11: Install the provided seal trim around the top edges of the airbox.

Figure F

INSTALL

Page 10

Refer to Figure G for Steps 11-12

Step 11: Install the Takeda housing into the vehicle. Secure it with the three bolts removed at Step 7.

One of the bolts will be installed inside the housing.

Step 12: Secure the housing to the air inlet with the two provided christmas tree plastic rivets.

Figure G

INSTALL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere aFe Power Autozubehör Handbücher

aFe Power

aFe Power 46-71110A Bedienungsanleitung

aFe Power

aFe Power Momentum GT Bedienungsanleitung

aFe Power

aFe Power F1-03003 Bedienungsanleitung

aFe Power

aFe Power Magnum FORCE 54-13035D Bedienungsanleitung

aFe Power

aFe Power 54-82039 Bedienungsanleitung

aFe Power

aFe Power 77-42008 Bedienungsanleitung

aFe Power

aFe Power SCORPION 79-21008L Bedienungsanleitung

aFe Power

aFe Power advanced FLOW engineering Bedienungsanleitung

aFe Power

aFe Power 77-83046 Bedienungsanleitung

aFe Power

aFe Power 52-10002D Bedienungsanleitung

aFe Power

aFe Power 54-12208 Bedienungsanleitung

aFe Power

aFe Power SCORPION 79-21004L Bedienungsanleitung

aFe Power

aFe Power 51-74201 Bedienungsanleitung

aFe Power

aFe Power 46-70049 Bedienungsanleitung

aFe Power

aFe Power 77-83028 Bedienungsanleitung

aFe Power

aFe Power Momentum hd Bedienungsanleitung

aFe Power

aFe Power dfs780 Bedienungsanleitung

aFe Power

aFe Power 77-46306 Bedienungsanleitung

aFe Power

aFe Power 54-12742 Bedienungsanleitung

aFe Power

aFe Power 46-71180A Bedienungsanleitung

aFe Power

aFe Power 50-70009S Bedienungsanleitung

aFe Power

aFe Power MOMENTUM GT 50-70034S Bedienungsanleitung

aFe Power

aFe Power Scorpion 79-21002L Bedienungsanleitung

aFe Power

aFe Power 46-39102 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung

aFe Power Takeda 56-10005D Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken