Agilent Technologies 490 Micro GC Bedienungsanleitung

Agilent Technologies

Agilent

490 Micro GC Field Case

User Manual

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Manual Part Number

G3581-90005

Edition

First edition, February 2014

Printed in the Netherlands

Agilent Technologies, Inc.

P.O. Box 8033

4330 EA Middelburg

The Netherlands

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an oper-

ating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

damage to the product or loss of

important data. Do not proceed

beyond a CAUTION notice until the

indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and met.

490 Micro GC Field Case User Manual 3

Contents

1 Getting Started

Safety Information 6

Initial Inspection 9

Unpacking 10

Packing list 10

Carrier gas 10

Instrument Overview 11

Front view 12

Back view 13

Power source 13

Battery pack 14

2 Installation and Use

Connecting the Micro GC to the Field Case 16

Automatic Battery Selection 22

Battery Status LED 23

Internal Buzzer 23

Carrier Gas Refill Instructions 24

Carrier gas refill assembly 24

Refill procedure 25

Additional refill information 26

Shipping 28

Cleaning 28

Disposal 28

3 Battery Pack and Charger

Battery Pack 30

Introduction 30

General precautions 30

Battery location 31

Battery handling 32

Charging 33

Discharging 34

Storage 34

Battery service life 35

Cleaning 35

Disposal 35

Technical specifications 36

Battery Charger 37

Introduction 37

Features 37

Charger status 38

4490 Micro GC Field Case User Manual

Operation 38

Cleaning 38

Disposal instructions 39

Technical specifications 39

AgilentProduct Name Variable

490 Micro GC Field Case

Agilent Technologies

Getting Started

Safety Information 6

Initial Inspection 9

Unpacking 10

Instrument Overview 11

6490 Micro GC Field Case User Manual

1Getting Started

Safety Information

In accordance with the Agilent commitment to customer service

and safety, the:

•Micro GC Field Case and its accompanying documentation

(NEN 5509) complies with the CE specifications and the

safety requirements for electrical equipment for

measurement, control, and laboratory use (CEI/IEC

61010-1), cCSAus and FCC-b.

•Battery Pack and Charger and its accompanying

documentation complies with the Safety, Battery Pack

UL2054, UL1015 (cabling) and CE, Charger to CE, and

documentation to NEN 5509.

This device has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to

case harmful interference in which case the user will be

required to correct the interference at his own expense.

To prevent any injury to the user or any damage to the instrument,

it is essential that you read the information in this document.

This manual is provided to help you establish operating

conditions, which will permit safe and efficient use of your

equipment.

If you have any problems understanding the text in this manual,

we advise you to contact your Agilent Technologies service

office for assistance. Agilent Technologies, Inc. cannot accept

responsibility for any damage or injury caused by

misunderstanding of the information in this manual.

Special considerations and precautions appear in this manual

in the form of NOTES, CAUTIONS, and WARNINGS. It is important

that you operate your equipment in accordance with the

instructions in this manual and any additional information,

which may be provided by Agilent Technologies, Inc. Address

any questions regarding the safe and proper use of your

equipment to your local Agilent office.

Getting Started 1

490 Micro GC Field Case User Manual 7

Follow these safety practices to ensure safe equipment

operation:

•Perform periodic leak checks on all supply lines and

pneumatic plumbing.

•Do not allow gas lines to become kinked or punctured. Place

lines away from foot traffic and extreme heat or cold.

•Store organic solvents in fireproof, vented, and clearly

labeled cabinets so they are easily identified as either toxic

materials or flammable materials, or both.

•Do not accumulate waste solvents. Dispose of such materials

through a regulated disposal program and not through

municipal sewage lines.

NOTE

This instrument has been tested per applicable requirements of the EMC

Directive as required to carry the European Union CE Mark. As such, this

equipment may be susceptible to radiation/interference levels or

frequencies, which are not within the tested limits.

WARNING

This instrument is designed for chromatographic analysis of appropri-

ately prepared samples. It must be operated using appropriate gases,

solvents, or both, and within specified maximum ranges for pressure,

flows, and temperatures as described in this manual. If the equipment is

used in a manner not specified by the manufacturer, the protection pro-

vided by the equipment may be impaired.

WARNING

It is the responsibility of the Customer to inform Agilent Customer Sup-

port Representatives if the instrument has been used for the analysis of

hazardous samples, prior to any instrument service being performed or

when an instrument is being returned to the Agilent Service Center for

repair.

8490 Micro GC Field Case User Manual

1Getting Started

CAUTION

•Disconnect the instrument from all power sources before removing the

protective panels to avoid exposure to potentially dangerous voltages.

•When it is necessary to use a non-original power cord plug, ensure the

replacement cord adheres to the color-coding and polarity described in the

manual and all local building safety codes.

•Replace faulty or frayed power cords immediately with the same type and rating.

•Place this instrument in a suitable location with sufficient ventilation to remove

gases and vapors. Space around the instrument must be sufficient to enable

cooling of the instrument.

•Before plugging the instrument in or turning the power on, always make sure

that the voltage and fuses are set appropriately for your local power source.

•Do not turn the instrument on if there is a possibility of any kind of electrical

damage. Instead, disconnect the power cord and battery packs and contact

your Agilent office.

•Insert the supplied power cord into a power outlet with a protective earth

ground connection. When using an extension cord, ensure that the cord is also

properly grounded.

•Do not change the external or internal grounding connections as this could

endanger you, or damage the instrument, or both.

•The instrument is properly grounded when shipped. You do not need to make

any changes to the electrical connections or to the instrument chassis to

ensure safe operation.

•When working with this instrument, follow the regulations for Good Laboratory

Practice (GLP). Take care to wear safety glasses and appropriate clothing.

•Do not place containers with flammable liquids on this instrument. Spilling the

liquid over hot parts may cause fire.

•This instrument may use flammable or explosive gases, for example, hydrogen

under pressure. Be sure to be familiar with and to accurately follow the

operation procedures prescribed for those gases before operating the instrument.

•Never try to repair or replace any component that is not described in this

manual without the assistance of an Agilent service engineer. Unauthorized

repairs or modifications will result in rejection of warranty claims.

•Always disconnect the AC power cord and battery packs before attempting any

type of maintenance.

•Use proper tools when working on the instrument to prevent danger for you,

damage to the instrument, or both.

•Do not attempt to replace fuses in this instrument.

•Damage can result if the instrument is stored under unfavorable conditions for

prolonged periods (for example, subject to heat, or water).

•Do not shut off column flow when the oven temperature is high, it may damage

the column.

•This unit has been designed and tested in accordance with recognized safety

standards and designed for use indoors.

•If the instrument is used in a manner not specified by Agilent Technologies, the

protection provided by the instrument may be impaired.

•Substituting parts or performing any unauthorized modification to the

instrument may result in a safety hazard.

•Changes or modifications not expressly approved by the responsible party for

compliance could void the user's authority to operate the equipment.

Getting Started 1

490 Micro GC Field Case User Manual 9

Initial Inspection

The Micro GC Field Case will arrive packed in one large box and

one or more smaller cartons. Inspect the cartons carefully for

damage or signs of rough handling. Report damage to the

carrier and to your local Agilent Technologies, Inc. office.

Unpack the Micro GC Field Case and accessories carefully and

transfer to the work area, using proper handling techniques.

Inspect the Micro GC Field Case and accessories carefully for

damage or signs of rough handling. Report damage to the

carrier and to your local Agilent Technologies, Inc. office.

The 4-channel Field Case will be supplied with a trolley making

transport easier.

WARNING

Avoid back strain or injury by following all safety precautions when lift-

ing (heavy) objects.

Figure 1 Field Case with trolley

10 490 Micro GC Field Case User Manual

1Getting Started

Unpacking

Check the packing list to ensure you have received all that you

require.

Packing list

Micro GC Field Case

Accessories (optional)

Carrier gas

The carrier gas supply tank is empty (transport regulations)

and should be refilled using the procedure “Carrier Gas Refill

Instructions” on page 24.

The common carrier gas for the Micro GC is He, N2, or Ar. The

recommended purity for carrier gas is 99.995 % minimum.

Table 1 Accessories

Car cigarette lighter adapter CP740291

Charger for 12 V battery pack NiMH CP740427

Battery pack NiMH CP740328

Carrier gas refill assembly BS3 CP737161

Carrier gas refill assembly DIN10 CP736964

Carrier gas refill assembly DIN6 CP738012

Carrier gas refill assembly CGA580 CP737013

Carrier gas refill assembly FRANCE CP737381

Andere Handbücher für 490 Micro GC

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies 1168/9A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3100 OFFGEL Fractionator Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6850 Series II Bedienungsanleitung

Agilent Technologies

Agilent Technologies Varian 3800 GC Bedienungsanleitung

Agilent Technologies

Agilent Technologies 83620A Bedienungsanleitung

Agilent Technologies

Agilent Technologies G2916A Bedienungsanleitung

Agilent Technologies

Agilent Technologies G7166A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7890A Handbuch

Agilent Technologies

Agilent Technologies U1840A Medalist sj5000 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 850-DS Bedienungsanleitung

Agilent Technologies

Agilent Technologies Intuvo 900 Benutzerhandbuch

Agilent Technologies

Agilent Technologies 85038M Handbuch

Agilent Technologies

Agilent Technologies 7693A Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1364B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6890 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BenchCel Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies AriaMx Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7890A Benutzerhandbuch

Agilent Technologies

Agilent Technologies 5890 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Magnis NGS Prep System Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung