Agilent Technologies 83620A Bedienungsanleitung

Service Manual

Agilent Technologies

83620A/22A/23A/24A/30A/40A/50A

Synthesized Sweepers

Serial Number Prefixes:

This manual applies to any instrument with the following model number and serial number prefix combinations. You may have to

modify this manual so that it applies directly to your instrument version. Refer to the “Instrument History” chapter.

Agilent Technologies 83620A/22A/24A

3420A, 3250A, 3245A, 3213A, 3145A

Agilent Technologies 83623A

3420A, 3339A, 3250A, 3245A, 3213A, 3145A

Agilent Technologies 83630A

3420A, 3250A, 3245A, 3213A, 3145A, 3143A, 3101A

Agilent Technologies 83640A

3420A, 3339A, 3250A, 3245A, 3213A, 3145A

Agilent Technologies 83650A

3420A, 3250A, 3245A, 3213A, 3145A, 3143A, 3052A

Part Number: 08360-90049

Printed in USA

November 1995

Notice

The material contained in this document is provided “as is”, and is subject to being changed, without notice, in future editions.

Further, to the maximum extent permitted by applicable law, Agilent disclaims all warranties, either express or implied with

regard to this manual and to any of the Agilent products to which it pertains, including but not limited to the implied warranties

of merchantability and fitness for a particular purpose. Agilent shall not be liable for errors or for incidental or consequential

damages in connection with the furnishing, use, or performance of this document or any of the Agilent products to which it

pertains. Should Agilent have a written contract with the User and should any of the contract terms conflict with these terms,

the contract terms shall control.

Questions or Comments about our Documentation?

We welcome any questions or comments you may have about our documentation. Please send us an E-mail at

[email protected].

Printed in USA July 2004

Notice

Hewlett-Packard to Agilent Technologies Transition

This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-

Packard's former test and measurement, semiconductor products and chemical analysis

businesses are now part of Agilent Technologies. To reduce potential confusion, the only

change to product numbers and names has been in the company name prefix: where a

product name/number was HP XXXX the current name/number is now Agilent XXXX. For

example, model number HP 8648 is now model number Agilent 8648.

Contacting Agilent Sales and Service Offices

The sales and service contact information in this manual may be out of date. The latest

service and contact information for your location can be found on the Web at:

http://www.agilent.com/find/assist

If you do not have access to the Internet, contact your field engineer. In any correspondence

or telephone conversation, refer to your instrument by its model number and full serial

number.

Certification

Hewlett-P

ard Company certies that this pro duct met its published

specications at the time of shipmen

tfrom the factory

.Hewlett-P

ard

further certies that its calibration measuremen

ts are traceable to the United

States National Institute of Standards and T

hnology

,to the exten

tallo

ythe Institute's calibration facilit

,and to the calibration facilities of other

ternational Standards Organization mem

bers.

arranty

This Hewlett-P

ard instrumen

tpro duct is w

arran

ted against defects in

material and workmanship for a p erio dof one y

ear from date of shipmen

During the w

arran

yperio d, Hewlett-Pac

kard Company will, at its option,

either repair or replace pro ducts whic

hpro

eto

be defectiv

or w

arran

yservice or repair, this pro duct m

ust bereturned to aservice

facilit

ydesignated b

yHewlett-P

ard. Buy

er shall prepa

yshipping c

harges to

Hewlett-P

ard and Hewlett-P

ard shall pa

yshipping c

harges to return the

pro duct to Buy

er. Ho

wev

er, Buy

er shall pa

yall shipping c

harges, duties, and

taxes for pro ducts returned to Hewlett-P

ard from another coun

try.

Hewlett-P

ard w

arran

ts that its soft

are and rmw

are designated b

Hewlett-P

ard for use with an instrumen

twill execute its programming

instructions when prop erly installed on that instrumen

t. Hewlett-P

ard does

not w

arran

tthat the operation of the instrumen

t, or softw

are, or rm

are will

beunin

terrupted or error-free.

Limita

tion of W

arranty

The foregoing w

arran

yshall not apply to defects resulting from improp er or

inadequate main

tenance by Buyer, Buyer-supplied softw

are or in

terfacing,

unauthorized mo dication or misuse, op eration outside of the en

vironmen

tal

specications for the pro duct, or improp er site preparation or maintenance.

NO OTHER W

ARRANTY IS EXPRESSED OR IMPLIED. HEWLETT-

CKARD SPECIFICALL

YDISCLAIMS THE IMPLIED W

ARRANTIES

OF MER

CHANT

ABILITY AND FITNESS F

OR AP

ARTICULAR

PURPOSE.

clusive Remedies

THE REMEDIES PRO

VIDED HEREIN ARE BUYER'S SOLE AND

CLUSIVE REMEDIES. HEWLETT-P

CKARD SHALL NOT BE

LIABLE F

OR ANY DIRECT, INDIRECT, SPECIAL, INCIDENT

AL, OR

CONSEQUENTIAL D

AMA

GES, WHETHER BASED ON CONTRA

CT,

TOR

T, OR ANY OTHER LEGAL THEOR

Assistance

duct maintenanc

eagr

ements and other customer assistanc

e agr

eements ar

available for Hew lett-Packar

dpr

ducts. F

or any assistanc

e, c

ontact your ne

est

Hew lett-Packard Sales and Servic

eOc



ackard Compan

y 1995

All Righ

ts Reserv

ed. Reproduction, adaptation, or translation without prior

written p ermission is prohibited, except as allo w

ed under the cop

yrightla

ws.

1400 FountaingroveParkway, Santa Rosa CA, 95403-1799, USA

Safety Notes

The follo

wing safet

ynotes are used throughout this man

ual. F

amiliarize

ourself with eac

hof the notes and its meaning b efore op erating this

instrumen

ARNING

arning denotes ahazard. It calls attention to aprocedure

which, if not correctly performed or adhered to, could result in

injury or loss of life. Do

not

proceed bey

ond aw

arning note until

the indicated conditions are fully understood and met.

UTION

Caution denotes ahazard. It calls atten

tion to a pro cedure

that, if not correctly performed or adhered to, would result in

damage to or destruction of the instrumen

t. Do

not

pro ceed

bey

ond a caution sign un

til the indicated conditions are fully

understoodand met.

General Safety Considerations

ARNING

These servicing instructions are for use b

y qualified personnel

only. T

oid electrical shock, do not perform any servicing

unless y

ou are qualified to do so.

The opening of cov

ers or remov

al of parts is lik

ely to expose

dangerous v

oltages. Disconnect the instrument from all

oltage sources while it is being opened.

The detachable po

er cord is the instrument disconnecting

device. It disconnects the mains circuits from the mains

supply before other parts of the instrument. The front panel

switch is only astandb

yswitch and is not a LINE switch.

The po

er cord is connected to internal capacitors that may

remain live for seconds after disconnecting the plug from its

er supply

This is aSafety Class Iproduct (pro

vided with aprotectiv

earthing ground incorporated in the po

er cord). The mains

plug shall only be inserted in asock

et outlet pro

vided with a

protectiv

eearth contact. Any interruption of the protectiv

conductor, inside or outside the instrument, is lik

ely to

makethe instrument dangerous. Intentional interruption is

prohibited.

For continued protection against fire hazard replace line fuse

only with same type and rating (F A/2 0V). The use of other

fuses or material is prohibited.

CAUTION

Alw

ays use the three-prong ac po

er cord supplied with this

instrumen

t. F

ailure to ensure adequate earth grounding by

not using this cord may cause instrumen

tdamage.

Before switc

hing on this pro duct, mak

esure that the line

oltage selector switc

his set to the voltage of the po

supply and the correct fuse is installed. Assure the supply

oltage is in the specied range.

This pro duct is designed for use in Installation Category II

and P

ollution Degree 2per IEC 1010 and 664 respectiv

ely

Ven

tilation Requiremen

ts:

When installing the pro duct in a

cabinet, the con

vection into and out of the pro duct m

ust not

berestricted. The ambien

t temp erature (outside the cabinet)

ust beless than the maximum operating temp erature of the

pro duct b



Cfor ev

ery 100 w

atts dissipated in the cabinet.

If the total p o

er dissipated in the cabinet is greater than

800 w

atts, then forced con

ection m

ust b eused.

Before Applying P

erify that the pro duct is congured to matc

hthe a

ailable main po

er source

per the input p ow

er conguration instructions pro

vided in this man

ual.

If this pro duct is to be energized via an autotransformer mak

esure the

common terminal is connected to the neutral (grounded side of the mains

supply).

vii

viii

Andere Handbücher für 83620A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies 6850 Series II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies XY Bedienungsanleitung

Agilent Technologies

Agilent Technologies Bravo Einrichtungshandbuch

Agilent Technologies

Agilent Technologies G3199 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Genomic DNA ScreenTape System Bedienungsanleitung

Agilent Technologies

Agilent Technologies PlateLoc Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5975 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies CrossLab RapidFire 400 Bedienungsanleitung

Agilent Technologies

Agilent Technologies OmnoBER 725 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Medalist i1000 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G2545A Gebrauchs- und Pflegehandbuch

Agilent Technologies

Agilent Technologies Varian CP-8400 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7890A GC Benutzerhandbuch

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6890 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6850 Series Bedienungs- und Montageanleitung

Agilent Technologies

Agilent Technologies 5975 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies gc/ms series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1220 Infinity II LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies G2570A GC/MSD Betriebsanleitung

Agilent Technologies

Agilent Technologies Bravo Platform Bedienungsanleitung

Agilent Technologies

Agilent Technologies AssayMAP 96AM Betriebsanleitung

Agilent Technologies

Agilent Technologies Intuvo 900 Benutzerhandbuch

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung