Agilent Technologies 990 Bedienungsanleitung

Agilent 990

Micro Gas Chromatograph Micro Gasifier

User Manual

Notices

No part of this manual may be reproduced in

any form or by any means (including electronic

storage and retrieval or translation into a for-

eign language) without prior agreement and

written consent from Agilent Technologies,

Inc. as governed by United States and interna-

tional copyright laws.

Manual Part Number

G3588-90025

Edition

First edition, August 2019

Printed in China

Agilent Technologies, Inc.

412 Ying Lun Road 

Waigoaqiao Free Trade Zone

Shanghai 200131 P.R.China

Warranty

The material contained in this document is

provided “as is,” and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted by

applicable law, Agilent disclaims all warran-

ties, either express or implied, with regard to

this manual and any information contained

herein, including but not limited to the implied

warranties of merchantability and fitness for

a particular purpose. Agilent shall not be lia-

ble for errors or for incidental or consequen-

tial damages in connection with the

furnishing, use, or performance of this docu-

ment or of any information contained herein.

Should Agilent and the user have a separate

written agreement with warranty terms cov-

ering the material in this document that con-

flict with these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and/or software described in this

document are furnished under a license and

may be used or copied only in accordance with

the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Software

and technical data rights granted to the federal

government include only those rights custom-

arily provided to end user customers. Agilent

provides this customary commercial license in

Software and technical data pursuant to FAR

12.211 (Technical Data) and 12.212 (Computer

Software) and, for the Department of Defense,

DFARS 252.227-7015 (Technical Data -Com-

mercial Items) and DFARS 227.7202-3 (Rights

in Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a 

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

damage to the product or loss of

important data. Do not proceed

beyond a CAUTION notice until the

indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

personal injury or death. Do not

proceed beyond a WARNING notice

until the indicated conditions are

fully understood and met.

Agilent 990 Micro GC Micro Gasifier User Manual 3

Contents

1Introduction

Safety Information 6

Safety symbols 6

Safety and regulatory information 7

General safety precautions 7

Shipping Instructions 9

Cleaning Instructions 9

Disposal Instructions 9

2 Installation and Use

Unpacking 12

Specifications 13

Installation 14

Tools required for Micro Gasifier installation 14

Operation 21

Troubleshooting 22

4 Agilent 990 Micro GC Micro Gasifier User Manual

Agilent 990 Micro GC Micro Gasifier User Manual 5

1Introduction

Safety Information 6

Shipping Instructions 9

Cleaning Instructions 9

Disposal Instructions 9

To prevent any injury to the user or any damage to the instrument, it is essential that you read the

information in this chapter and the user manual(s).

If this manual is not in your native language, or if you have problems understanding the text,

contact your Agilent office for assistance. Agilent cannot accept responsibility for any damage or

injury caused by misunderstanding of the information in this manual.

1Introduction

Safety Information

6 Agilent 990 Micro GC Micro Gasifier User Manual

Safety Information

Safety symbols

Warnings in the manual or on the instrument must be observed during all phases of operation,

service, and repair of this instrument. Failure to comply with these precautions violates safety

standards of design and the intended use of the instrument. Agilent Technologies assumes no

liability for the customer’s failure to comply with these requirements.



See accompanying instructions for more information.



Indicates a hot surface.



Indicates hazardous voltages.



Indicates earth (ground) terminal.



Indicates potential explosion hazard.



Indicates electrostatic discharge hazard.



Indicates a hazard. 

See the Agilent 990 Micro GC user documentation for the item labeled.



Indicates that you must not discard this electrical/electronic product in

domestic household waste

Agilent 990 Micro GC Micro Gasifier User Manual 7

1Introduction

Safety and regulatory information

This instrument and its accompanying documentation comply with the CE specifications and the

safety requirements for electrical equipment for measurement, control, and laboratory use

(CEI/IEC 1010-1)CCSAUS and FCC-b.

This device has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference, in which

case the user will be required to correct the interference at his own expense.

This instrument is designed for use in combination with the Micro GC. If the equipment is used in

a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

NOTE

This instrument has been tested per applicable requirements of EMC Directive as required to

carry the European Union CE Mark. As such, this equipment may be susceptible to

radiation/interference levels or frequencies, which are not within the tested limits.

General safety precautions

WARNING

This instrument is designed for chromatographic analysis of appropriately prepared samples. It

must be operated using appropriate gases or solvents, and within specified maximum ranges for

pressure, flows, and temperatures as described in this manual. If the equipment is used in a

manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

WARNING

It is the responsibility of the customer to inform Agilent customer support representatives if the

instrument has been used for the analysis of hazardous samples, prior to any instrument service

being performed or when an instrument is being returned for repair.

To ensure safe equipment operation, adhere to the following safety practices:

•Perform periodic leak checks on all supply lines and pneumatic plumbing.

•Do not allow gas lines to become kinked or punctured. Place lines away from foot traffic and

extreme heat or cold.

•Store organic solvents in fireproof, vented, and clearly labeled cabinets so they are easily

identified as either toxic, or flammable, or both types of materials.

•Do not accumulate waste solvents. Dispose of such materials through a regulated disposal

program and not through municipal sewage lines.

•To avoid exposure to potentially dangerous voltages, disconnect the instrument from all

power sources before removing protective panels.

•When it is necessary to use a nonoriginal, power cord plug, ensure the replacement cord

adheres to the color-coding and polarity described in the manual and all local building safety

codes.

•Replace faulty or frayed power cords immediately with the same type and rating.

1Introduction

General safety precautions

8 Agilent 990 Micro GC Micro Gasifier User Manual

•The Power Supply should be placed in a suitable location with sufficient ventilation to remove

gases and vapors. Space around the Power Supply must be sufficient to enable cooling of the

Power Supply.

•Do not turn on the Power Supply if there is a possibility of any electrical damage. Instead,

disconnect the power cord, and contact your Agilent office.

•The supplied power cord must be inserted into a power outlet with a protective earth ground

connection. When using an extension cord, ensure that the cord is also properly grounded.

•Do not change the external or internal grounding connections as this could endanger you or

damage the Power Supply.

•The Power Supply is properly grounded when shipped. You do not need to make any changes

to the electrical connections or to the Power Supply chassis to ensure safe operation.

•Do not place containers with flammable liquids on this Power Supply. Spillage of the liquid

over hot parts may cause fire.

•Never try to repair or replace any component that is not described in this manual without the

assistance of an Agilent service engineer. Unauthorized repairs or modifications will result in

rejection of warranty claims.

•Always disconnect the AC power cord before attempting any type of maintenance.

•Use proper tools when working on the Power Supply to prevent danger for you or damage to

the Power Supply.

•The customer should not attempt to replace the fuses in the Power Supply.

•Damage can result if the Power Supply is stored under unfavorable conditions for prolonged

periods (for example, subject to heat, water, and so forth).

•This unit has been designed and tested in accordance with recognized safety standards and is

designed for use indoors.

•If the Power Supply is used in a manner not specified by the manufacturer, the protection

provided by the Power Supply may be impaired.

•Substituting parts or performing any unauthorized modification to the Power Supply may

result in a safety hazard.

Agilent 990 Micro GC Micro Gasifier User Manual 9

1Introduction

Shipping Instructions

Follow these steps to prepare your Micro Gasifier for shipping:

1Let the Micro Gasifier cool down for at least 30 minutes before packing.

2Cap every inlet and outlet port.

3Cap all inlet and outlet tubing.

4Always include the power supply with the Micro Gasifier.

Cleaning Instructions

To keep the Micro Gasifier surface clean, refer to the remarks given below:

•Switch the Micro GC off.

•Remove the power cable from the mains.

•Remove the Micro Gasifier power cable.

•Use a soft (no hard or abrasive) brush to carefully brush away all dust and dirt.

•If the outer case is dirty, (never clean the inside) clean it with a soft, clean cloth dampened with

mild detergent.

•Never use alcohol or thinners to clean the Micro Gasifier. These chemicals can damage the

case.

•Do not get water on the electronics components.

•Do not use compressed air to clean.

Disposal Instructions

Disposal of the Micro Gasifier must be carried out in accordance with all (environmental)

regulations applicable in your country.

1Introduction

Disposal Instructions

10 Agilent 990 Micro GC Micro Gasifier User Manual

Andere Handbücher für 990

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies 5975T LTM GC/MSD Betriebsanleitung

Agilent Technologies

Agilent Technologies Truevolt Series Service-Handbuch

Agilent Technologies

Agilent Technologies 6850 Series II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8860 Betriebsanleitung

Agilent Technologies

Agilent Technologies G3430-68640 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7890 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Varian CP-8400 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6100 Series LC/MS Bedienungsanleitung

Agilent Technologies

Agilent Technologies 490 Micro GC Bedienungsanleitung

Agilent Technologies

Agilent Technologies Infinity Binary Pump VL 1290 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1364B Bedienungsanleitung

Agilent Technologies

Agilent Technologies TPS-mobile Bedienungsanleitung

Agilent Technologies

Agilent Technologies 708-DS Bedienungsanleitung

Agilent Technologies

Agilent Technologies 55B AA Bedienungsanleitung

Agilent Technologies

Agilent Technologies Cary 3500 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1888 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7820A Bedienungsanleitung

Agilent Technologies

Agilent Technologies PlateLoc Bedienungsanleitung

Agilent Technologies

Agilent Technologies N1021B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1367A Bedienungsanleitung

Agilent Technologies

Agilent Technologies G3199 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6460 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung