Agilent Technologies UHV-24 Bedienungsanleitung

Agilent UHV-24/UHV-24p Ionization Gauge

User Manual

2 Agilent UHV-24/UHV-24p Ionization Gauge User Manual

Notices

Manual Part Number

699905505

Edition G.00, February 2023

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Agilent Technologies, Inc. as governed

by United States and international

Agilent Technologies Italia S.p.A.

Vacuum Products Division

Via F.lli Varian, 54

10040 Leinì (TO)

ITALY

www.agilent.com

Instrument Manufacturing

Agilent Technologies LDA Malaysia

Sdn Bhd Bayan Lepas

Free Industrial Zone 11900 Bayan

Lepas, Penang Malaysia

Printed in Italy

Warranty

The material contained in this

document is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further, to the

maximum extent permitted by

applicable law, Agilent disclaims all

warranties, either express or implied,

with regard to this manual and any

information contained herein, including

but not limited to the implied

warranties of merchantability and

fitness for a particular purpose. Agilent

shall not be liable for errors or for

incidental or consequential damages in

connection with the furnishing, use, or

performance of this document or of

any information contained herein.

Should Agilent and the user have a

separate written agreement with

warranty terms covering the material

in this document that conflict with

these terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights.

Software and technical data rights

granted to the federal government

include only those rights customarily

provided to end user customers.

Agilent provides this customary

commercial license in Software and

technical data pursuant to FAR 12.211

(Technical Data) and 12.212

(Computer Software) and, for the

Department of Defense, DFARS

252.227-7015 (Technical Data -

Commercial Items) and DFARS

227.7202-3 (Rights in Commercial

Computer Software or Computer

Software Documentation).

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions

are fully understood and met.

WARNING

CAUTION

Contents

Agilent UHV-24/UHV-24p Ionization Gauge User Manual 3

Contents

1Instructions for Use 5

About this manual 6

Validity 6

Definitions and terminology 7

Definition of Caution, Warning and Note 7

Warning Symbols 8

Safety 10

Proper use 10

Improper use 11

Grounding the Gauge Controller 11

Use with Combustibles and Mixtures 12

Vacuum Equipment Cleanliness 12

Disposal 13

Service 14

2Technical Information 15

Description of the UHV-24/UHV-24p Ionization Gauge 16

Operation 16

Installation 18

Technical Specifications 19

Application Notes 21

Degas 23

Bakeout 23

Maintenance: Filament Replacement 24

Tungsten Filament Replacement 24

Yttria-coated iridium filament Replacement 25

Gas Correction Factors 26

Accessories and spare parts 29

Instructions for Use

4 Agilent UHV-24/UHV-24p Ionization Gauge User Manual

Instructions for Use

Agilent UHV-24/UHV-24p Ionization Gauge User Manual 5

1Instructions for Use

About this manual 6

Validity 6

Definitions and terminology 7

Definition of Caution, Warning and Note 7

Warning Symbols 8

Safety 10

Proper use 10

Improper use 11

Grounding the Gauge Controller 11

Use with Combustibles and Mixtures 12

Vacuum Equipment Cleanliness 12

Disposal 13

Service 14

Instructions for Use

6 Agilent UHV-24/UHV-24p Ionization Gauge User Manual

About this manual

Validity

This manual lists the instructions for the users of the UHV-24/UHV-24p Ion Gauge,

with particular reference to the notions relating to safety, operation and first level

maintenance, limited to maintenance operations for which the user is responsible.

The maintenance operations, illustrated in the specific sections, with specific

provisions relating to the higher level of maintenance (personnel specifically trained

for maintenance operations) must not be carried out by the user.

NOTE

1This manual contains useful information so that all personnel using the

UHV-24/UHV-24p Ion Gauge can operate it safely and guarantee perfect

efficiency, for its entire life span.

2Keep this manual, together with all the related publications, in an accessible

place known to all operators/maintenance personnel.

Instructions for Use

Agilent UHV-24/UHV-24p Ionization Gauge User Manual 7

Definitions and terminology

Definition of Caution, Warning and Note

Some important references of this manual are highlighted and framed in

contrasting color.

CAUTION

Caution messages are displayed before procedures which, if not observed, could

cause damage to the equipment.

WARNING

Warning messages draw the operator's attention to a specific procedure or

practice which, if not performed correctly, could result in serious personal

injury.

NOTE

Notes are intended to call attention to important information and provide more

detail regarding specific steps.

Instructions for Use

8 Agilent UHV-24/UHV-24p Ionization Gauge User Manual

Warning Symbols

The following is a list of symbols that appear in conjunction with warnings on the

UHV-24/UHV-24p Ion Gauge. The hazard they describe is also shown.

A triangular symbol indicates a warning. The meanings of the symbols that may

appear alongside warnings in the documentation are as follows:

Dangerous voltages

Hot surface

Generic hazard

Cutting hazard

European Declaration of Conformity

Waste Electrical and Electronic Equipment

Instructions for Use

Agilent UHV-24/UHV-24p Ionization Gauge User Manual 9

The following symbol may be used on warning labels attached to the instrument.

When you see this symbol, refer to the relevant operation or service manual for the

correct procedure referred to by that warning label.

The following symbols appear on the instrument for your information.

Production date

Dangerous voltages

Hot surfaces

Generic hazard

CE certification

Waste Electrical and Electronic Equipment

Instructions for Use

10 Agilent UHV-24/UHV-24p Ionization Gauge User Manual

Safety

This section contains the information, prescribed by the Low Voltage Directive

2014/35/EU, which is essential for the compliance and observance of the safety

regulations both generally and in relation to the specific use of the product.

Failure to comply with these instructions and the other instructions contained in

this manual may render the safety conditions envisaged in the design phase

inefficient and cause accidents to those operating the product.

Agilent Technologies declines all responsibility for damage to the product or for the

physical safety of the operator or third parties deriving from the non-observance of

the safety rules indicated in the technical documentation.

Proper use

This manual contains important warnings and safety instructions to be observed in

order for the unit to work safely.

The product described in this manual is intended exclusively for the area of

application specified in the instructions. The manual also provides indications

regarding the essential requirements for the application and operation of the

product as well as the safety measures that can be adopted to guarantee regular

operation. Agilent Technologies does not provide any guarantee or assume any

responsibility for applications other than those described in this manual or in which

the essential requirements and safety measures are not respected.

The product must only be used by qualified personnel who are able to take the

necessary safety measures under conditions that do not cause damage or injury.

Any accessories and equipment used with the product must be supplied or

approved by Agilent Technologies.

Any adjustment or maintenance operation must be performed by a professional

technician informed about the risks.

Repairs on the product must be carried out exclusively by Agilent authorized

personnel.

Andere Handbücher für UHV-24

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Laborausrüstung Handbücher

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16196A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5975 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Graphite Tube Atomizer GTA 120 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8860 Merkblatt

Agilent Technologies

Agilent Technologies G1574A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Seahorse XFp Bedienungsanleitung

Agilent Technologies

Agilent Technologies 55 AA Bedienungsanleitung

Agilent Technologies

Agilent Technologies 990 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Archon Bedienungsanleitung

Agilent Technologies

Agilent Technologies 7683 Bedienungsanleitung

Agilent Technologies

Agilent Technologies SPS 4 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies G3183B Betriebsanleitung

Agilent Technologies

Agilent Technologies OmniBER 720 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G1701EA Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8494G Service-Handbuch

Agilent Technologies

Agilent Technologies varian 320-MS LC/MS Bedienungsanleitung

Agilent Technologies

Agilent Technologies Magnis G9710A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity Bedienungsanleitung

Agilent Technologies

Agilent Technologies MX3000P Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 83620A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 75000 Series C Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung

Yamato

Yamato BM510 Bedienungsanleitung