Agilent Technologies G6011B Bedienungsanleitung

Agilent G6011B

Quiet Cover MS

User Manual

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation into

a foreign language) without prior agreement

and written consent from Agilent Technolo-

gies, Inc. as governed by United States and

international copyright laws.

Manual Part Number

G6011-90110

Edition

Second edition, April 2020

Printed in USA

Agilent Technologies, Inc.

2850 Centerville Rd 

Wilmington, DE 19808

USA

Warranty

The material contained in this document is

provided “as is,” and is subject to being

changed, without notice, in future editions.

Further, to the maximum extent permitted by

applicable law, Agilent disclaims all warran-

ties, either express or implied, with regard to

this manual and any information contained

herein, including but not limited to the implied

warranties of merchantability and fitness for

a particular purpose. Agilent shall not be lia-

ble for errors or for incidental or consequen-

tial damages in connection with the

furnishing, use, or performance of this docu-

ment or of any information contained herein.

Should Agilent and the user have a separate

written agreement with warranty terms cov-

ering the material in this document that con-

flict with these terms, the warranty terms in

the separate agreement shall control.

Technology Licenses

The hardware and/or software described in this

document are furnished under a license and

may be used or copied only in accordance with

the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Software

and technical data rights granted to the federal

government include only those rights custom-

arily provided to end user customers. Agilent

provides this customary commercial license in

Software and technical data pursuant to FAR

12.211 (Technical Data) and 12.212 (Computer

Software) and, for the Department of Defense,

DFARS 252.227-7015 (Technical Data -Com-

mercial Items) and DFARS 227.7202-3 (Rights

in Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a 

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

damage to the product or loss of

important data. Do not proceed

beyond a CAUTION notice until the

indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or the

like that, if not correctly performed

or adhered to, could result in

personal injury or death. Do not

proceed beyond a WARNING notice

until the indicated conditions are

fully understood and met.

Quiet Cover MS User Manual 3

Contents

1Introduction

General Information 5

Important Safety Warnings 7

Cleaning 8

Recycling the Product 8

Parts Identification 9

Site Preparation 11

2 Installation

Installing the Oil Tray 13

Accommodating a KF40 Foreline Pump Intake Flange 14

Installing the Rough Pump Inside the Quiet Cover MS 15

Connecting the Power Supply 18

Verifying the Installation 19

3Operation

Control Panel and Indicators 21

Handling Temperature Alarms 21

Changing Rough Pump Oil 22

Using the Kickstand 24

4 Troubleshooting

Quiet Cover MS User Manual 4

Introduction

General Information 5

Important Safety Warnings 7

Cleaning 8

Recycling the Product 8

Parts Identification 9

Site Preparation 11

This manual describes how to install, operate, and troubleshoot the Agilent G6011B Quiet

Cover MS for LC/MS rough pumps.

Your rough pump fits in the Quiet Cover MS to significantly reduce noise, while an internal fan

ensures that your pump will not overheat. There is an easy-to-use kickstand and a full-size oil tray

to facilitate changing the oil. There are also multiple access panels for easy access to the pump

for routine maintenance.

The Quiet Cover MS is only compatible with the Agilent MS40+ and MS40S Rotary-Vane Pump

used with electron microscopy and mass spectrometry including the LC/MS.

1 General Information

General Information

5Quiet Cover MS User Manual

General Information

The Quiet Cover MS conforms to the International Electrochemical Commission (IEC) 61010–1

safety standard.

It also conforms to the following regulations on Electromagnetic Compatibility (EMC) and Radio

Frequency Interference (RFI):

•CISPR 11/EN 55011: Group 1, Class A

•IEC/EN 61326

•AUS/NZ

This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme a la norme

NMB—001 du Canada.

The Quiet Cover MS is designed and manufactured under a quality system registered to ISO 9001.

Information

The Agilent Technologies Quiet Cover MS meets the following IEC classifications: Category II,

Pollution Degree 2, Class III.

Quiet Cover MS has been designed and tested in accordance with recognized safety standards

and is designed for use indoors. If it is used in a manner not specified by the manufacturer, the

protection provided by the instrument may be impaired. Whenever the safety protection of the

Quiet Cover MS has been compromised, disconnect it from all power sources and secure it

against unintended operation.

Refer servicing to qualified service personnel. Substituting parts or performing any unauthorized

modification to the instrument may result in a safety hazard.

1 General Information

Symbols

Quiet Cover MS User Manual 6

Symbols

Warnings in the manual or on the instrument must be observed during all phases of operation,

service, and repair of this instrument. Failure to comply with these precautions violates safety

standards of design and the intended use of the instrument. Agilent Technologies assumes no

liability for the customer’s failure to comply with these requirements. Table 1 lists the safety

symbols that may appear on Quiet Cover MS.

Table 1 Safety symbols

Description Symbol

See accompanying instructions for more information.

Indicates that you must not discard this electrical /

electronic product in domestic household waste.

1ImportantSafetyWarnings

Important Safety Warnings

7Quiet Cover MS User Manual

Important Safety Warnings

Safety cautions and warnings must be observed during all phases of operation, service, and repair

of Quiet Cover MS. Failure to comply with these precautions violates safety standards of design

and Quiet Cover MS’s intended use. Agilent Technologies assumes no liability for the customer’s

failure to comply with these requirements.

WARNING

A two-person lift is required when removing the Quiet Cover MS from the packaging. Failure to

perform a two person lift may result in personal injury.

WARNING

Never run the pump without also running Quiet Cover MS.

CAUTION

While running Quiet Cover MS:

• Do not block air flow to the fan.

• Do not set items on top of Quiet Cover MS.

• It is important that the Quiet Cover MS not recirculate hot air. Always position the

Quiet Cover MS where it can draw cool air on all sides.

CAUTION

Be sure to position Quiet Cover MS so that there is plenty of room to allow access to panels and

controls.

WARNING

In the event of a temperature alarm malfunction or if the alarm has been on for an extended

period of time, the Quiet Cover MS and the pump may be dangerously hot. Check that the

Quiet Cover MS and pump are cool before you touch them.

1Cleaning

Electromagnetic compatibility

Quiet Cover MS User Manual 8

Electromagnetic compatibility

This device complies with the requirements of CISPR 11. Operation is subject to the following two

conditions:

•This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause

undesired operation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try one or more of the

following measures:

•Relocate the radio or antenna.

•Move the device away from the radio or television.

•Plug the device into a different electrical outlet, so that the device and the radio or television

are on separate electrical circuits.

•Make sure that all peripheral devices are also certified.

•Make sure that appropriate cables are used to connect the device to peripheral equipment.

•Consult your equipment dealer, Agilent Technologies, or an experienced technician for

assistance.

•Changes or modifications not expressly approved by Agilent Technologies could void the

user’s authority to operate the equipment.

Sound emission certification for Federal Republic of

Germany

•Sound pressure – Lp < 70 dB am according to EN 27779:1991.

•Schalldruckpegel – LP < 70 dB am nach EN 27779:1991.

Cleaning

To clean the Quiet Cover MS:

1Reach under the front of Quiet Cover MS and pull out the oil tray.

2Wipe out excess oil with a clean, lint-free cloth.

3Wash the tray with a mild soap solution.

4Wipe away any spills or other debris from the Quiet Cover MS using a clean, lint-free cloth.

Recycling the Product

For recycling, contact your local Agilent sales office.

1 Parts Identification

Parts Identification

9Quiet Cover MS User Manual

Parts Identification

Table 2 lists the contents of the Quiet Cover MS kit. Figure 1 and Figure 2 on page 10 depict the

parts of the Quiet Cover MS.

NOTE

See Figure 10 on page 21 for a view of the front panel control.

Table 2 G6011B Quiet Cover MS contents list

Part Quantity Part number

Quiet Cover MS 1 G6011B

Oil tray 1 G6011-40100

Power supply 1 5188-1164

KF40 Trim ring 1 n/a

Quiet Cover MS User Manual 1 G6011-90110

MS40+ Mounting Spacer 4 n/a

MS40S Front Air Duct 1 n/a

MS40S Exhaust Fitting 1 n/a

Figure 1. Quiet Cover MS (front view)

Status light

Locking caster

Power switch

Foreline hose opening

Oil tray

Access door

1 Parts Identification

Parts Identification

Quiet Cover MS User Manual 10

Figure 2. Quiet Cover MS (rear view) (power supply not shown)

Kickstand

Power connection

Fan Intake

Inhaltsverzeichnis

Andere Agilent Technologies Wasserpumpe Handbücher

Agilent Technologies

Agilent Technologies TwisTorr 704 FS Bedienungsanleitung

Agilent Technologies

Agilent Technologies TwisTorr 304 FS Bedienungsanleitung

Agilent Technologies

Agilent Technologies HS-2 Bedienungsanleitung

Agilent Technologies

Agilent Technologies RV Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1200 series Bedienungsanleitung

Agilent Technologies

Agilent Technologies IDP-7 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1100 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies Varian TriScroll 620 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TV 551 Navigator Bedienungsanleitung

Agilent Technologies

Agilent Technologies PHV K Series Handbuch

Agilent Technologies

Agilent Technologies DS40M Bedienungsanleitung

Agilent Technologies

Agilent Technologies MS120 Bedienungsanleitung

Agilent Technologies

Agilent Technologies G6697A IDP-10 Bedienungsanleitung

Agilent Technologies

Agilent Technologies InfinityLab LC Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies TriScroll 620 INV Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies R1330-529 HS-16 Konfigurationshandbuch

Agilent Technologies

Agilent Technologies TPS-mini 9699180 Bedienungsanleitung

Agilent Technologies

Agilent Technologies Turbo-V 81-T Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1260 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies 1290 Infinity II Bedienungsanleitung

Agilent Technologies

Agilent Technologies SH-110 Bedienungsanleitung

Agilent Technologies

Agilent Technologies TriScroll 300 Series Gebrauchs- und Pflegehandbuch

Agilent Technologies

Agilent Technologies TPS-compact Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung