Argos Denver 339/9622 Bedienungsanleitung

MADE IN

BRITAIN

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 3 - 31/03/15

Important - Please read these instructions fully before starting assembly

ALR3097

339/9622

346/7712

362/3927

Denver - 2 Drawer 3 Door Mirror Robe

Dimensions

Width - 113.5cm

Depth - 50cm

Height - 181cm

Issue 2 - 20/01/15 - Short Hanging Rail changed to 364mm.

Back Holders now shown fitted vertically.

Updated helpline number.

Notes added about pairing up hinge plates and hinges from the same bag.

Issue 3 - 31/03/15 - To make the assembly easier, the brackets are now fitted to the Large Vertical Rail in Step 12.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately ??kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

132

Drawer Back (W686-124)

(686 x 124mm) x 2

Drawer Base (T697-367)

(697 x 367mm) x 2

Left Drawer Side (W370-124LH)

(370 x 124mm) x 2

Drawer Front (DF2092A)

(742 x 192mm) x 2

Right Drawer Side (W370-124RH)

(370 x 124mm) x 2

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Large Hanging Rail (FHR708)

(710mm long)

Small Hanging Rail (FHR364)

(364mm long)

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

overbalance protector kit

supplied or, an alternative fixing

method of your choice.

• Dispose of all packaging

carefully and responsibly.

Components - Panels

Please check you have all the panels listed below

80%

x 3

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

910

Large Door (D1578MA)

(1786 x 355mm)

(Mirror - SG29

1776 x 300mm

Safety Back SAR)

Small Back (X1779-391)

(1779 x 391mm)

Large Back (X1779-737)

(1779 x 737mm)

19 20

Top/Base (DF1877A)

(1105 x 495mm) x 2

8Left Side (DF2091A)

(1808 x 496mm)

14 Rail (D1570A)

(718 x 60mm) x 2

Right Side (D1576A)

(1808 x 496mm)

Divider (DF1878A)

(1753 x 494mm)

Small Shelf (DF1879A)

(372 x 470mm)

Wide Shelf (D1574A)

(718 x 494mm)

17 Small Door (DF2094A)

(1338 x 355mm) x 2

Small Vertical Rail (DF2095A)

(1306.5 x 88mm)

Large Vertical Rail (D1577A)

(1752 x 88mm) x 1

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 12

Metal dowel (F901) x 24

D E F

Small locking

nut (F3) x 4

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Drawer runner (F1004) x 4

Large locking

nut (F900) x 20

9mm Screw (F74) x 4 9mm Screw (F73) x 8

Nail (F51) x 26

Rail holder

(F1014) x 4

40mm Screw (F910) x 12

13mm Screw (F63) x 22

Hinge (F518) x 9

Hinge plate

(F523) x 9

Knock-in Peg (F171GY) x 8

Wedgefix (F639) x 8

Plastic Nail (F91) x 4

RStrap Screw Washer x 2

Overbalance protector kit (F269) x 1

Rule Scissors Spirit

level

Bradawl Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Step

ladder

Electric drill

(only use when

drilling into walls)

Square Hammer

Nail screw (F277) x 6

Tools required

Bracket (F945) x 2

13mm Screw (F79) x 4

Back holder (F276) x 6

*These can also be round

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 03456 400800 quoting the reference

numbers below

Step 1

80% x 2

x 2

Step 2

Prepare the 2 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

front

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

2 3

Step 6

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 4 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

x 2

Assembly Instructions

Step 7

80% x 3

Step 8

Prepare the right side

Screw 6 metal dowels

into the right side .

Push a rail holder into

the right side . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Fit 3 hinge plates onto

the right side , making

sure that the slot is

facing towards the

finished front edge.

9Finished

front edge

10mm

Prepare the top and

base panels

Tap 2 wooden dowels

into each of the top and

base panels .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 4 large locking

nuts into each of the

top and base panels .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Finished

front edge

x 2

Important: Use the hinge plates

in the bag marked as ...1043

Important: Keep the Hinges and Hinge

Plates in their bags until they are used.

They must not get mixed up.

Assembly Instructions

Step 9

Finished

front edge

Finished

front edge

Step 10

Fit the top and base

to the right side

Push the top and base

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the top and the

base .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Finished

front edge

Fit the large vertical

rail

Attach the large vertical

rail to the top and

base using 4 screws

. .

16 11

Assembly Instructions

Step 11

Step 12

Fit the small shelf to

the right side and fit

the 2 brackets to the

large vertical rail

Push the small shelf

onto the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the small shelf .

Fit the 2 brackets

onto the back of the

large vertical rail ,

flush to the edge in the

positions shown, using

screws .

Finished

front edge

Prepare the small

shelf

Tap 2 wooden dowels

into the small shelf .

Insert 4 large locking

nuts into the small

shelf .

Finished

front edge

Assembly Instructions

Step 13

Prepare the divider

a: Place 2 runners on

the divider . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the divider .

c: Screw 4 metal

dowels into the

divider .

Push a rail holder into

the divider . Make

sure that it is fitted

straight, in line with the

panel edges and then

secure with screw .

Fit 3 hinge plates onto

the divider , making

sure that the slot is

facing towards the

finished front edge.

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

Important: Use the hinge plates

in the bag marked as ...1046

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Portabase Bedienungsanleitung

Argos

Argos Canterbury 2 DR 2 DRW ROBE Bedienungsanleitung

Argos

Argos San Diego 343/7058 Bedienungsanleitung

Argos

Argos Baltimore 603/0115 Bedienungsanleitung

Argos

Argos Zest 267/8454 Bedienungsanleitung

Argos

Argos Wow Raye Wooden Chair Bedienungsanleitung

Argos

Argos WOW BUTTERFLY 6006558 Bedienungsanleitung

Argos

Argos Stratford White Bedienungsanleitung

Argos

Argos Java 156/5465 Bedienungsanleitung

Argos

Argos 484/2831 Bedienungsanleitung

Argos

Argos Osaka Dressing Table 2273237 Bedienungsanleitung

Argos

Argos Kids Scandinavia XL Storage Box Bedienungsanleitung

Argos

Argos WILTSHIRE OAK 150 Bedienungsanleitung

Argos

Argos Fuji 8 607/2960 Bedienungsanleitung

Argos

Argos Miami 654/4986 Bedienungsanleitung

Argos

Argos Austen HOME 804/3416 Bedienungsanleitung

Argos

Argos Camden 244/3012 Bedienungsanleitung

Argos

Argos Brooklyn 709/2688 Bedienungsanleitung

Argos

Argos Tolga 323/5164 Bedienungsanleitung

Argos

Argos Malibu 630/3165 Bedienungsanleitung

Argos

Argos Capella 249/6674 Bedienungsanleitung

Argos

Argos Lawson 402/4439 Bedienungsanleitung

Argos

Argos Arvika 355/7794 Bedienungsanleitung

Argos

Argos New Penton Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung