Assa Abloy Adams Rite 3700 Bedienungsanleitung

3700/8700/8800

Rim Exit Device

Owner’s Manual

Table of Contents

Table of Contents...................................................................................2

What This Owner’s Manual Can Do For You.....................................3

Owner’s Record......................................................................................3

Exit Device Operation............................................................................4

Dogging the Push Bar...........................................................................5

Removing or Replacing the End Caps................................................6

Positioning the Jamb Strike..................................................................7

Maintenance............................................................................................8

Obtaining Replacement Parts and Service........................................8

Replacement Parts Available for 3700 RIM.......................................9

Replacement Parts Available for 8700 RIM.....................................10

Replacement Parts Available for 8800 RIM.....................................11

Troubleshooting....................................................................................12

Adams Rite Limited Warranty.............................................................12

What This Owner’s Manual Can Do For You

• It shows exactly how to operate your exit device.

• It shows you simple things to do and check before you call for service,

so you may save the cost of an

unnecessaryservicecall.

• It provides a complete listing of service replaceable parts.

•It contains your Adams Rite Limited Warranty and what steps to take

for service.

Owner’s Record

The model number is located on the hinge stile mounting base as shown

below. Refer to this number and the additional information below when

you call upon your local Adams Rite dealer regarding this product.

Model Number 3700/8700/8800

Finish ____________________

Door Size ____________________

Hardware Supplier ____________________

Date Installed ____________________

Exit Device Operation

Adams Rite rim mounted devices provide for life safety and security by us of a

“starwheel” bolt and interlocking strike. The device is totally different from

previous rim-mounted devices and achieves a new level of security for exit

devices without sacrificing life safety in any way. Additional security (against

jamb spreading) is achieved by a unique nose guard that interlocks with the

hardened steel strike plate.

When the push bar is depressed, an interior deadlocking slide is pulled back to

release the “starwheel” bolt allowing the door to open. Upon closing, the device

engages the strike and the deadlocking slide returns to secure the door. Exterior

entrance can be gained by key or with extensive line of entry trim available from

Adams Rite.

NOTE: The following is not applicable to 3700 devices.

Dogging the Push Bar

Dogging the push bar disables the latching function, making the door a simple

push/pull operation.

1. COMPLETE the following to dog the device.

a. DEPRESS the push bar completely and HOLD.

CAUTION

Over-rotation of the key past the prescribed ¼ turn can cause

damage to the Exit Device.

b. TURN the hex key 1/4 turn clockwise.

2. To release, TURN the hex key 1/4 turn counterclockwise.

Removing or Replacing the End Caps

NOTE: To facilitate maintenance procedures, the two end caps can be

removed.

1. PERFORM the following to remove the end caps.

a. INSERT a small Phillips tip screwdriver through the holes located in

the end caps and UNSCREW the concealed attachment screws.

b. REMOVE the end caps and SET aside.

2. PERFORM the following to replace the end caps.

a. LOCATE the end caps on the push bar.

NOTE: When replacing the end caps, the screws must be snapped in

the screw clips on the inside of the end caps.

b. ATTACH the end caps using a small Phillips tip screwdriver through

the holes located in the end caps and TIGHTEN the attachment

screws hand tight only.

Positioning the Jamb Strike

CAUTION

A proper frame stop must be used in conjunction with the door/exit device

or damage may occur.

NOTE: The jamb strike must be properly located and tightened securely for

the device to properly operate.

1. PERFORM the following to position the jamb strike.

a. POSITION the strike assembly so the “starwheel” bolt fully

interlocks around the strike when the door is closed.

b. LOOSEN the mounting screws, as necessary, to adjust the

horizontal positioning.

c. WHEN proper positioning is achieved,

THEN TIGHTEN the mounting screws securely.

Maintenance

Exit devices are designed for life safety first. Adams Rite devices are cycle

tested in excess of one million operations, both as prototypes during design and

as quality control samples periodically during production. Atmospheric and other

localized conditions vary greatly, but extremely dirty, salty or abrasive situations

could require service attention such as lubrication of moving parts from time to

time to assure reliability. Service personnel should be reminded that life safety is

the goal.

Other maintenance that might be required specifically for a Rim device includes:

• Tightening of jamb strike screws

• Tightening of push bar mounting screws

Obtaining Replacement Parts and Service

The merchandise that you have purchase has been carefully engineered and

manufactured under Adams Rite’s rigid quality standards and should provide

many years of satisfactory and dependable operation. However, like all

mechanical merchandise, it may require replacement parts or maintenance.

The Parts Manual is also available on Adams Rite’s web page at the following

address:

www.adamsrite.com

Replacement Parts Available for 3700 RIM

NOTE: The mounting bar final assembly is not available.

Replacement Parts Available for 8700 RIM

NOTE: The mounting bar final assembly is not available.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Corbin Russwin DC3200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YM Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT Powerglide 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED5400 (A) Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED4800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-FMS Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 91DCP Bedienungsanleitung

Assa Abloy

Assa Abloy besam PUSH-N-GO Bedienungsanleitung

Assa Abloy

Assa Abloy Besam VersaMax ICU Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton CloserPlus CLP8101 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED4000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-FMS-K Bedienungsanleitung

Assa Abloy

Assa Abloy DC340DA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FIREGUARD 12-2468 Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 5200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 185 Quick Spotter Bedienungsanleitung

Assa Abloy

Assa Abloy UNION DoorSense 8755A Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 2500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy G-FMS Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung