Assa Abloy SARGENT Powerglide 281 Series Bedienungsanleitung

Closer mounted to frame

on stop side of door.

Top Jamb Application

(Type 25-O, 25-OZ, and 25-OZA Arms)

Use instructions on page 4

Standard Application

(Type 25-O Arm)

Use instructions on page 3

Closer mounted

on hinge side of door.

Parallel Arm Application

(Type 25-P9)

Use instructions on page 5

Closer mounted

on stop side of door.

NOTE: For 08 and OLC type arms mounting,

see data sheets provided with arm.

1-800-727-5477 • www.sargentlock.com

A7278F 12/22 Rev 6

Installation Instructions

281 Powerglide Series

Closer with Regular Arms (Without Holder)

281 Series Non Sized Adjustable from Sizes 1 thru 6

express written permission ofSARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.

Approved 2022-12-08

Standard and Top Jamb Applications

Number of Turns of Spring Power Adjusting Screw

From Factory Setting (Use Chart as Guide ONLY)

Door Width

in (mm)

Approximate

Door Weight (Pounds)

281 Exterior

Doors

Interior

Doors *

24 (610) 80 Factory Set —

30 (762) 110 1-5 CW

32 (813) 115

1-5 CCW36 (914) 130 5-8 CW

40 (1016) 150

42 (1067) 155 8-13 CW Factory Set

44 (1118) 165

46 (1168) 170 13-15 CW 1-5 CW

48 (1219) 180

over 48 (1219) — up to 19 CW as req. 5 CW & up as req.

LEFT

HAND DOOR

RIGHT

HAND DOOR

PULL

HINGE SIDE PULL

HINGE SIDE

STOP (PUSH) SIDE STOP (PUSH) SIDE

Increase

Power Decrease

Power

Counterclockwise

(CCW)

Clockwise

(CW)

1/4" Allen Spring Power

Adjusting Screw

Parallel Arm Application Only

Number of turns of Spring Power Adjusting Screw

From Factory Setting (Use Chart as Guide ONLY)

Door Width

in (mm)

Approximate

Door Weight (Pounds)

281 Exterior

Doors

Interior

Doors*

24 (610) 80 2-7 CW —

30 (762) 110

32 (813) 115 7-11 CW 1-5 CCW

36 (914) 130

40 (1016) 150

11-15 CW Factory Set

42 (1067) 155

44 (1118) 165

1-8 CW46 (1168) 170 15-17 CW

48 (1219) 180

over 48 (1219) — up to 19 CW as req. 8 CW & up as req.

To Determine Your Hand of Door

Spring Power Adjustment

Adjust spring according to the

appropriate application chart.

*If interior doors do not have to comply with ADA requirements, exterior door

settings are recommended. Where strong drafts exist, increase spring power as

needed by turning spring adjustment screw clockwise. If necessary, reduce spring

power by turning screw counterclockwise.

1-800-727-5477 • www.sargentlock.com A7278F 12/22 Rev 6

281 Series

Installation Instructions

Closer with Regular Arms

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

Approved 2022-12-08

1. Prepare door and frame.

2. Mount bracket and closer to door.

3. Attach foot and pivot to frame.

Attach foot to frame with pivot away from hinge.

You’ve installed the 281 Powerglide Series Closer - Standard Mount.

🛑

Go to page 6 for closer adjustments and cover installation.

Arm

Screw

Swivel Arm

Rod

Position of Main Arm

when Assembling to

spindle Index Mark

on Spindle

Main Arm

4. Attach Arm.

Attach arm with index mark on spindle aligned as shown. Secure with screw

and washer. Insert rod end into swivel arm and tighten arm screw.

Arm

Type Mounting Max Door

Opening Dim A Dim B

Regular

Arm

Holder

Standard 120° 7" 12-1/8"

Alternate 160° 5" 10-1/8"

If Butt, Frame, and Wall conditions permit, door will open 180°

NOTES:

1. Right hand door shown, left hand door opposite.

2. This dimension is taken from hinge edge of door for invisible hinges.

3. Drill and tap and use screws provided or use mortise nuts when required.

Pivot

Dim B

Dim

1-1/4" 2"

#12 x 1-1/2 Wood Screws or

#12-24 x 5/8 Flat Head

Machine Screws

7/8"

10-3/8"

Top of

Door

of Hinge Pivot:

Butts, offset Pivots, Swing Clear,

Center Hung, or Invisible hinges

Alternate mounting is recommended

for ADA compliant doors

Install mounting

bracket with arrow

pointing up for both

RH and LH doors.

Install Closer with

Spring Adjustment

Screw away from

hinge.

Use Mounting bracket

as drill thru template

Right Hand

Door Shown

Right Hand Door Shown (Left Hand Door Opposite)

281 Standard Application Instructions

1-800-727-5477 • www.sargentlock.com

281 Series

Installation Instructions

Closer with Regular Arms

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

A7278F 12/22 Rev 6

Approved 2022-12-08

281 Top Jamb Application Instructions

1. Prepare door and frame.

3. Attach foot and pivot.

You’ve installed the 281 Powerglide Series Closer - Top Jamb Mount.

🛑

Go to page 6 for closer adjustments and cover installation.

Attach foot

to door with

pivot away from

hinge.

Arm Type Reveal Depth Dim A Max Door

Opening

"O" Arm 0" to 2" 9-5/16" 180°

"OZ" Arm 2-1/8" to 5" 10-1/8" 140°

"OZA" Arm 5-1/8" to 8" 10-15/16" 140°

IMPORTANT: Use alternate mounting if door can open beyond limits shown

for standard mounting.

NOTES:

1. Left hand door shown. Right hand door opposite.

2. These dimensions may be reduced to 3/8" min. if rail on top casing is

narrow or low ceiling condition exists. Foot placement should be moved

accordingly.*

3. This dimension is taken from hinge edge of door for invisible hinges.

4. Drill and tap and use screws provided or use mortise nuts when required.

4. Install main arm and spindle.

2. Mount bracket and closer to door.

Use Mounting bracket

as drill-through template

Install mounting

bracket with arrow

pointing down for

both RH and LH doors.

Install Closer with

Spring Adjustment

Screw away from

hinge.

Right Hand

Door Shown

Right

Angle

Rod

Swivel

Arm 45°

Position of Main Arm When

Assembling to Spindle

Right Hand Door

Arm

Screw

Dim

3-5/8"

#12 x 1-1/2 Wood Screws or

#12-24 x 5/8 Flat Head

Machine Screws

10-3/8"

Top of

Door

of Pivot

Hinge

Frame

5/8"

*1-5/8 "

Left Hand

Door Shown

Spring Power

Adjustment

Screw

Index mark on

spindle

View looking up when

assembling arm to spindle

Right Hand

Door Shown

Left Hand

Door Shown

Main Arm

View Looking Up

1-800-727-5477 • www.sargentlock.com A7278F 12/22 Rev 6

281 Series

Installation Instructions

Closer with Regular Arms

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

Approved 2022-12-08

281 Parallel Arm Application Instructions

1. Prepare door and frame.

4. Assemble the spindle.

Max Door

Opening Dim A Dim B

120° 4-1/2" 10-1/2"

*180° 1-5/8" 7-5/8"

NOTES:

1. Left hand door shown. Right hand opposite.

2. Do not use this mounting for "swing clear" hinges.

3. This dimension is taken from hinge edge of door for

invisible hinges.

4. May be reduced by 1/2" to avoid door trim.

Drill & tap and use screws provided or use mortise nuts

when required.

2. Mount bracket and closer. 3. Attach foot bracket to frame stop.

Optional arms for mounting.

(Refer to data sheets provided with arm)

Remove backing from self adhesive tape

and use bracket as drill-through template.

Dim A

2-1/2"

#12 x 1-1/2

Wood Screws or

#12-24 x 5/8 Flat Head

Machine Screws

10-3/8"

Top of

Door

of Hinge Pivot

Stop

5/16"

of Bracket

Dim B

Door

1-1/4" #12 x 1-1/2

Wood Screws or

#12-24 x 5/8 Flat Head

Machine Screws

7/8"

1/2"

Hinge Pivot:

Butt, Offset Pivots, Swing Clear,

Center hung or Invisible hinges

Install mounting

bracket with arrow

pointing up for both

RH and LH doors.

Install Closer with

Spring Adjustment

Screw towards hinge.

Right Hand

Door Shown

For flush frame and door conditions

For use with overhead

door holders

P4 or P4A

Bracket

P3 or P3A

Bracket (Sargent #590

shown)

P4A bracket is used with overhead doors

Approx 45°

Main Arm

Right Hand

Door

Left Hand

Door

Index Mark on

Spindle

Index Mark on

Spindle

You’ve installed the 281 Powerglide Series Closer - Parallel Arm Mount.

🛑

Go to page 6 for closer adjustments and cover installation.

CAUTION: Door closer will not

operate properly if main arm is

not indexed correctly.

1-800-727-5477 • www.sargentlock.com

281 Series

Installation Instructions

Closer with Regular Arms

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

A7278F 12/22 Rev 6

Approved 2022-12-08

Regulating Door Speed and Latching as Needed

Use hex socket (1/8" Allen) wrench and turn valves

clockwise to slow down or counterclockwise to speed up

door movement.

Faster

(+) Slower

(–)

Regulating Backcheck

To regulate the intensity of backcheck action, turn valve

clockwise to increase or counterclockwise to decrease

checking

Decrease

(–) Increase

(+)

CAUTION: Set valve for slight cushioning effect. It is damaging to

the closer if the checking action is too abrupt. Never use backcheck

as a door stop. ALWAYS USE DOOR STOP TO STOP THE DOOR

For Models with Optional Delayed Action Feature

"Delayed Action" provides slow door closing through

delayed action range.

Turn valve clockwise to slow down or counterclockwise

to speed up door movement.

Faster

(+) Slower

(–)

Adjusting Foot for Additional Closing Power

(For Standard and Top Jamb Applications Only)

Move foot

Pivot to hole

nearest hinge

Final Adjustment and Regulating Procedure

Latching

Speed Range

Closing Speed

Range

Delayed

Action Range

Backcheck

Range

Latching

Speed

Valve

Closing

Speed

Valve

Delayed

Action

Valve

(Optional)

Backcheck

Valve

1/4" Spring Power

Adjustment Screw

Hinge Edge of Door

Install Cover

Install cover with two (2) screws as shown.

Insert is removable.

Place in unused opening.

1-800-727-5477 • www.sargentlock.com A7278F 12/22 Rev 6

281 Series

Installation Instructions

Closer with Regular Arms

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

Approved 2022-12-08

Using Mortise Nuts with Sargent Door Closers

NOTES:

1. See instruction or data sheet packed with door closer for dimensions locating the closer body and foot on door and frame.

2. Mortise nut shown is designed for unreinforced metal doors.

3. For top jamb and corner bracket applications: The door closer foot will be attached to the door in a manner similar to that shown

for mounting the closer body.

4. For doors 2-1/4" thick: Mortise nut shown for 1-3/4" thick doors will be furnished along with appropriate length thru-bolts. Door

construction must provide a bridge type reinforcement to prevent the door rail from collapsing when thru-bolts are tightened.

Frame

Door Stop

Mortise Nut Head

Drill 3/8" Dia. hole

for Mortise Nut

body.

Door

Drill 1/4" Dia. hole

for mounting screws

Cover

Sargent 1430 Series Closer Shown

(Other series similar)

See Note #1 above for dimension

information. If a dimension is less than

7/8" is used. The door stop must be cut

to clear the Mortise nut head or the

Mortise nut head must be recessed.

(See enlarged view "Y")

Frame

Door

Stop

Mortise Nut

Head

Shorten Mortise

nut body to this

length

351 Door closer

shown. (Track assembly

mounting is similar)

3/8" Dia. hole

View "Y"

1/4" Dia.

drilled hole

351 Door Closer Shown

1/8"

5/8" Dia. hole

Mortise Nut

9/16"

Dia.

#12-24 Thread

1-11/16" for 1-3/4" thick door

1-5/16" for 1-3/8" thick door

(See Note #4 above for 2-1/4" thick doors)

7/64"

1-800-727-5477 • www.sargentlock.com

281 Series

Installation Instructions

Closer with Regular Arms

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited. Patent

pending and/or patent www.assaabloydss.com/patents.

A7278F 12/22 Rev 6

Approved 2022-12-08

A7278F 12/22 Rev 6

Attention Installer: Improper installation

may result in damage to the product and

void the factory warranty.

WARNING

This product can expose you to lead which is known to the state of California to

cause cancer and birth defects or other reproductive harm. For more information

go to www.P65warnings.ca.gov.

1-800-727-5477 • www.sargentlock.com

whole or in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

Patent pending and/or patent www.assaabloydss.com/patents.

Approved 2022-12-08

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Effeff 843G Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 268 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy CMD Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 UniTrol Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON SMOK-CHEK V 0101 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC340DA Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RD150-3 Bedienungsanleitung

Assa Abloy

Assa Abloy effeff ePED 1386Z1LB7 04S0 Series Referenzhandbuch

Assa Abloy

Assa Abloy Lockwood L7714SDSIL Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SP33-M Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 8000H Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-CS Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 185 Quick Spotter Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FIREGUARD 12-2468 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung