Assa Abloy Besam SW200i US Handbuch

Besam Swing Door Operator

SW200i US

Installation and Service Manual

Original instructions

1007718-US-3.0 – Issue 2012-06-27

ASSA ABLOY, the global leader in door opening solutions

are expressly forbidden without the prior written consent of the applicable company within Besam US Inc.. Rights reserved

for changes without prior notice.

Backtrack information: folder: Library, version: a417, date: 2012-06-21, time: 13:01:22, state: Working

CONTENTS

41 Revision ...............................................................................................................................

52 Important information ...........................................................................................................

73 Technical specification .........................................................................................................

94 How the SW200i works ........................................................................................................

145 Models .................................................................................................................................

166 Operator/Door handing ........................................................................................................

177 Part identification .................................................................................................................

188 Arm systems ........................................................................................................................

239 Options ................................................................................................................................

2710 Pre-installation .....................................................................................................................

3011 Mechanical installation .........................................................................................................

4712 Electrical connection ............................................................................................................

5913 Start-up ................................................................................................................................

6514 Changing group of parameters ............................................................................................

6915 Classification ........................................................................................................................

7016 Cover ...................................................................................................................................

7117 Troubleshooting ...................................................................................................................

7318 Maintenance plan ................................................................................................................

7419 ANSI / BHMA A156.10 .........................................................................................................

7920 ANSI / BHMA A156.19 (LOW ENERGY APPLICATION) ....................................................

3Issue 2012-06-271007718-US-3.0

CONTENTS

1 Revision

Following pages have been revised:

Revision 2.0 →3.0Page

OPS added to the OPD sensors11, 52, 64

1007718-US-3.0Issue 2012-06-274

1 Revision

2 Important information

WARNING!

Failure to observe the information in this manual may result in personal injury or

damage to equipment.

To reduce the risk of injury to persons - use this operator with single or double

pedestrian swinging or folding doors only.

Save these instructions for future reference.

2.1 Intended use

The Besam SW200i is an automatic swing door operator developed to facilitate entrances to

buildings and within buildings through swing doors. The operator is only for indoor use. The

SW200i is a universal electro-mechanical operator that combines a Heavy Duty (HD) operator

for large heavy doors with Low Energy (LE) applications of swing doors. The operator is factory

set to Low Energy (LE).

The Besam SW200i can be surface or concealed mounted on either side of the door header for

pull or push action, and is suitable for single doors, double doors and double egress doors fitted

with swing clear hinges, offset or center pivots.

The Besam SW200i ensures all-around safety. The operator can be combined with a full range

of sensor products providing swing door safety, but meets also the requirements for a low energy

operator without any sensors.

The operator is connected to the door leaf with a range of different arm systems.

The door is designed to offer continuous use, a high degree of safety and maximum lifetime.

For use see User manual 1007717.

2.2 Safety precautions

Do not climb on door parts.

Do not let children play with the door or the fixed controls.

Be sure to complete the site acceptance test before taking the door in to operation, see PRA-

0007.

To avoid bodily injury, material damage and malfunction of the product, the instructions con-

tained in this manual must be strictly observed during installation, adjustment, repairs and service

etc. Training is needed to carry out these tasks safely. Only Besam-trained technicians should

be allowed to carry out these operations.

2.3 Electronic equipment reception interference

The equipment complies with the European EMC directive (US market FCC Part 15), provided

installed according to Installation and Service manual.

5Issue 2012-06-271007718-US-3.0

2 Important information

The equipment may generate and use radio frequency energy and if not installed and used

properly, it may cause interference to radio, television reception or other radio frequency type

systems.

If other equipment does not fully comply with immunity requirements interference may occur.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

•Re-orient the receiving antenna.

•Relocate the receiver with respect to the equipment.

•Move the receiver away from the equipment.

•Plug the receiver into a different outlet so that equipment and receiver are on different branch

circuits.

•Check that protective earth (PE) is connected.

If necessary, the user should consult the dealer or an experienced electronic technician for addi-

tional suggestions.

Besam products are equipped with electronics and may also be equipped with batteries containing

materials which are hazardous to the environment. Remove this material from the operator before

it is scrapped and make sure that it is disposed of properly as was done with the packaging.

This manual contains the necessary details and instructions for the installation, maintenance

and service of the Swing Door Operator Besam SW200i.

2.4 Glazing materials

The glazing material for swing doors shall comply with ANSI Z97.1

1007718-US-3.0Issue 2012-06-276

2 Important information

3 Technical specification

Besam US Inc.Manufacturer:

1900 Airport Road, US-Monroe, NC 28110Address:

SW200iType:

120 V AC +10/-15%, 50/60 HzPower supply:

max. 300 WPower consumption:

24 V DC, max. 700 mAAuxiliary voltage:

2 x T 6,3 AH 250 VInternal control fuse:

36-48”(914-1219 mm)Door width:

Selectable: 12V DC, max. 1200 mA / 24 V DC, max. 600 mAElectro-mechanical locking de-

vice:

100-700 lb. (45-315 kg)Door weight:

PUSH: 80° - 110°, with reveal 0 - 12”(0 - 305 mm)Door opening angle:

PULL: 80° - 110°, with reveal 0 - 5 1/8”(0 - 130 mm)

PAS: only 80°-95°

80°-95° in a concealed application

variable between 2 - 12 secondsOpening time (0° - 80°):

variable between 4 - 12 secondsClosing time (90° - 10°):

1,5-30 secondsHOLD open time:

-4 °F to +113 °F (-20 °C to +45 °C)Ambient temperature:

Max. 95%Relative humidity:

19,8 lb. (9 kg)Drive unit weight:

This product is to be installed internally.

Class of protection IP 20.

Complies with: ANSI/BHMA A156.19, ANSI/BHMA A156.10, UL 325, UL 991, UL 244A, UL 1310,

CAN/CSA-C22.2 N0 223-M91 and CAN/CSA-C22.2 N0 247-92

Third party approvals from established certification organizations valid for

safety in use and escape route safety. For details see Declaration of Confor-

mity.

Approvals:

2 11/16’’

5 1/8’’

11/2’’ 11/2’’13/8’’

4 5/16’’

5/8’’

7Issue 2012-06-271007718-US-3.0

3 Technical specification

3.1 Opening times

Opening time is adjustable from 2-12 seconds and dependent on the weight, width and installed

arm system of the door. For max opening times on low energy doors, see Table I on page 79.

1007718-US-3.0Issue 2012-06-278

3 Technical specification

4 How the SW200i works

The swing door operator SW200i uses a DC motor which is connected to the output shaft by a

combination of a bevel gear and spur gears. The arm system that is connected to the output shaft

opens the door in a wall mounted application.

There is also an adjustable spring mechanism connected to the output shaft. During opening of

the door, the clock spring is tensioned by the rotation of the output shaft. During the closing

cycle, the accumulated spring force is acting in the closing direction. The spring force can be

adjusted so there is appropriate force to close the door when it is operated manually or in case

of a power failure.

4.1 Opening

When an opening signal is received by the control unit, the door is opened at the operator-ad-

justed opening speed. Before the door is fully open at back check, it slows automatically to low

speed. The motor stops when the selected door opening angle has been reached. The open position

is held by the motor.

If the door is obstructed while opening, it will either stall or stop which can be selected with a

DIP-switch (SOS). Stop on stall is always active in program selector Mode Off.

•Continue on stall - the door will continue to try to open during the hold open time.

•Stop on stall - the door will, even if hold open time has not expired, close after 2 seconds.

4.2 Closing

When the hold open time has elapsed, the operator will close the door automatically, using

spring force and motor. The door will slow to low speed at latch check before it reaches the

fully closed position. The door is kept closed by spring power or combined with extended

closing torque by the motor.

9Issue 2012-06-271007718-US-3.0

4 How the SW200i works

4.3 Control switch

4.3.1 ON/OFF/HOLD open switch (option)

P/N: 1003582

FUNCTION

OFF HOLD

FUNCTION

ON OFF HOLD

ProgramFunction

Impulses from activation units connected to XIMP are forwarded into inner impulse

“CU-200”on page 52.

Impulses from activation units connected to XIMP are not forwarded into inner

impulse. These units cannot open the door.

OFF

The door is held permanently open.HOLD

4.4 Functions on the basic control unit CU-200

Also see page 52 for more information.

4.4.1 Power failure

During power failure the operator acts as a door closer with controlled closing speed. The micro

switch located next to the spindle shaft can be adjusted to control when lock kick occurs.

4.4.2 Spring force

The operator is delivered with spring pre-tension factory set to 360°. If necessary, the spring

tension can be electronically adjusted with a potentiometer to required closing force, but max

total 720°. The arm must also be relocated on the spindle.

4.4.3 Extended closing torque (CLTQ)

If the potentiometer CLTQ is set to 0°, the door will close with normal spring power. If the

potentiometer is turned clockwise, the motor will increase the closing torque. Extended closing

torque will be reduced to zero:

•If the door mounted sensor presence detection is activated during the last 10° before closing.

•If the door mounted sensor presence impulse is activated in closed position or during closing

(even if manually opened).

1007718-US-3.0Issue 2012-06-2710

4 How the SW200i works

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Besam SW300 Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-E Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Kurzanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Pando Mini Go Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Pull Side Series Kurzanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite EX76 Betriebsanleitung

Assa Abloy

Assa Abloy Yale 6000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC140 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SP33-M Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-FT Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Installationshandbuch

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 1370 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600H Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff 843G Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 268 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5630 Series Kurzanleitung

Assa Abloy

Assa Abloy DC130 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5400 FE Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung