Assa Abloy Norton 1600H Bedienungsanleitung

Hold Open Arm Models

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-3532-020 Rev 3 11/20

1600H

Non Handed Door Closer

Regular Arm

Top Jamb Mount

Parallel Arm

Ce produit peut vous exposer au plomb qui, dans l’état de la Californie,

est reconnu pour causer le cancer, des anomalies congénitales ou d’autres

problèmes de reproduction. Pour plus d’informations, visitez:

www.P65warnings.ca.gov.

This product can expose you to lead which is known to the state of

California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65warnings.ca.gov.

WARNING

Regular Arm Top Jamb Mount Parallel Arm

Optional Legacy Friction Hold Open Arm

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Note: Legacy FHO arm has

installation orientation.

See 80-9300-0003-000 for details.

Tools Needed

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door: To Identify Your Model:

1-6 = 1601

3 = 1603BC

4 = 1604BC

Included Components (See page 2 for mounting hardware)

Approved 2020-12-10

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-3532-020 Rev 3 11/20

• For special applications, a separate door and frame

preparation template is packed with these instructions. Use

this instruction sheet for installation sequence and closer

adjustments only.

• Doors should be hung on ball bearing or anti-friction hinges.

• A separate door stop is recommended.

Mounting Hardware Door or Frame Drill

Closer, H/O Shoe or Optional PA Bracket:

1/4-14 x 1-1/2 Oval Flat Head Mach. Screw Wood 3/16" (4.76mm)

Closer, H/O Shoe or Optional PA Bracket:

1/4-20 x 3/4 Oval Flat Head Mach. Screw Metal Drill #7 (.201 dia. or 5.10mm)

Tap 1/4-20

H/O Shoe to Optional PA Bracket:

1/4-20 x 1/2 Oval Flat Head Mach. Screw

Closer:

Sleeve Nut and Bolt (SNB)

(optional)

Hollow Metal 9/32" (7.00mm) thru

3/8" (9.50mm) door face opposite to closer

Aluminum or Wood 3/8" (9.50mm) thru

Closer:

Thru Bolt and Grommet Nut (TBGN)

(optional)

All

9/32" (7.00mm) thru

3/8" (9.50mm) dia. x 3/8" (9.500mm) deep,

door face opposite to closer

• Always consult door/frame manufacturer for fastener

compatibility.

• Door and frame must be properly reinforced.

• Adjust closing time speed between 3 and 7 seconds from

90° to 0°.

• These door closers should NOT be installed on exposed side

(weather side) of exterior doors.

• Dimensions are given in inches (millimeters).

Closer Adjustments

Do not over tighten

cap or cover screws.

Pinion Cap or Cover

Regular Arm Top Jamb Mount Parallel Arm

ATTENTION:

An incorrectly installed or improperly adjusted door closer can

cause property damage or personal injury. These installation

instructions should be followed to avoid the possibility of

misapplication or misadjustment.

Latch Backcheck

Use provided hex wrench

to turn valves. NEVER

force valves out of closer.

NEVER completely close

backcheck valve.

Door must be open to

adjust spring closing

power. Refer to chart. Do

not use a power drill.

Warranty will be void.

Sweep

1600H Hold Open Closer

Approved 2020-12-10

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-3532-020 Rev 3 11/20 3

1600H Regular Arm Installation (Right Hand Shown)

Opening

To 100°

101° to 120°

*121° to 180°

(178)

(152)

3-1/2

(89)

Dimension "A"

*Door/Wall/Hardware/Jamb

conditions permitting

2. Mount closer to door. 3a. Remove dial from

Hold Open arm.

(152)

1-3/4

(44)

1-1/4

(32)

3/4

(19) 9-1/16

(230)

7/8

(22)

3b. Install separate arms.

4. Connect arms, preload spring

and tighten set screw.

5. Set Hold Open.

1st

2nd 3rd

Keep door open in position

until dial screw secures dial.

1st

3rd 2nd

Rotate elbow until

Hold Open arm is

perpendicular to frame.

Rotating arm

preloads closer

spring power.

RH:

Clockwise

to tighten.

LH: Counter

clockwise to

tighten.

1st

3rd

2nd

You’ve installed the 1600H Hold Open Closer - Regular Arm.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Dial DOWN

Left and Right Hand

RH and LH:

Position at at S

1. Prepare door and frame.

Approved 2020-12-10

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-3532-020 Rev 3 11/20

1600H Top Jamb Mount Installation (Right Hand Shown)

2. Mount closer to frame.

Opening

To 100°

101° to 120°

*121° to 180°

7-1/2

(191)

(152)

3-1/2

(89)

Dimension "A"

*Door/Wall/Hardware/Jamb

conditions permitting

9-1/16

(230) 3/4

(19)

1/2

(13)

(152)

1-1/2

(38)

1-3/4

(44)

Top of

Door

A longer connecting

rod is required

for reveals greater

than 3" (76)

Reveal

3a. Remove dial from

Hold Open arm.

3b. Install separate arms.

5. Set Hold Open.

4. Connect arms, preload spring

and tighten set screw.

1st

2nd

3rd

Rotate elbow until

Hold Open arm is

perpendicular to frame.

Rotating arm

preloads closer

spring power.

Keep door open in position

until dial screw secures dial.

3rd

1st

3rd

1st

2nd

RH:

Clockwise

to tighten.

LH: Counter

clockwise to

tighten.

2nd

You’ve now installed the 1600H Hold Open Closer - Top Jamb Mount.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Dial DOWN

Left and Right

Hand

RH and LH:

Position at at S

1. Prepare door and frame.

Approved 2020-12-10

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-3532-020 Rev 3 11/20 5

1600H Parallel Arm Installation (Right Hand Shown)

2. Close latch and sweep

valves.

4. Install soft plate and mount closer.

Door

Opening

To 100°

101° to 130°

131° to 180°

9-1/4

(235)

7-3/4

(197)

5-3/4

(146)

7-5/8

(194)

6-1/8

(156)

4-1/8

(105)

8-5/8

(219)

7-1/8

(181)

5-1/8

(130)

Door/Wall/Hardware/Jamb

conditions permitting

Holes for 1688

Plate only 1-1/2

(38)

(178) 4

(102)

2-1/8

(54) 3-1/4

(83)

1/2

(13)

3/4

(19)

9-1/16

(230) C

Top of

Door

Frame

2-3/4

(70) 3/8

(10)

1/2

(13)

7/16

(11)

(50)

5. Install Hold Open arm to plate. 6. Place main arm on closer spindle and rotate.

Remove

Arm from

Spindle

Dial DOWN

Left and Right Hand

3. Remove dial from

Hold Open arm.

IMPORTANT

1. Prepare door and frame.

Approved 2020-12-10

Norton is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 80-9316-3532-020 Rev 3 11/20

Norton Technical Product Support:

Monroe, NC 28112 USA

Phone: 800.438.1951 ext: 6030

TechSupport.Norton@assaabloy.com

nortondoorcontrols.com

1600H Parallel Arm Installation (Right Hand Shown) continued

7. Remove arm and attach as shown. 8. Open latch and sweep valves.

Do not completely

open valves. Valves

will leak.

Arm under tension.

Keep ngers away

from moving parts.

9. Connect arms, preload spring and

tighten set screw.

10. Set Hold Open.

1st

2nd

3rd

5th

1st

4th

By hand,

rotate arm

elbow to be

1-1/2" from

door face.

Keep door open in position

until dial screw secures dial.

3rd3rd

2nd

RH:

Clockwise

to tighten.

LH: Counter

clockwise to

tighten.

2nd

1st

You’ve now installed the 1600H Hold Open Closer - Parallel Arm.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Rotating arm

preloads closer

spring power.

RH: Position at at R

LH: Position at at L

1st

2nd

Approved 2020-12-10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy DC 700G-FT BGS Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-FMS Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W50 Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-E Bedienungsanleitung

Assa Abloy

Assa Abloy 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 6200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FM8700 Bedienungsanleitung

Assa Abloy

Assa Abloy MAB 609 + AC572 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 UniTrol Bedienungsanleitung

Assa Abloy

Assa Abloy DC700G-FMS-K Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FIREGUARD 12-2468 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED4800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC200 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5000 DB Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 POWERGLIDE Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED5400 (A) Series Bedienungsanleitung

Assa Abloy

Assa Abloy ABLOY DA401 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung