Assa Abloy Norton J1600 UniTrol Bedienungsanleitung

Non Hold Open (UL Listed)

Hold Open (H) (Not UL Listed)

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2534-020 Rev 2 04/20

J1600 UniTrol®

Non Handed Door Closer

Top Jamb Mount

Sized

(Sizes 3,4)

UNI-J1603BC (H)

UNI-J1604BC (H)

Adjustable

(Sizes 1-6)

UNI-J1601 (H)

Hinge Edge of Door

Ce produit peut vous exposer au plomb qui, dans l’état de la Californie,

est reconnu pour causer le cancer, des anomalies congénitales ou d’autres

problèmes de reproduction. Pour plus d’informations, visitez:

www.P65warnings.ca.gov.

This product can expose you to lead which is known to the state of

California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65warnings.ca.gov.

WARNING

Tools Needed

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door: To Identify Your Model:

1-6 = 1601

3 = 1603BC

4 = 1604BC

Included Components (See page 2 for mounting hardware)

UNI-J1600 (H)

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Sleeve-nut

Rod Unit

(Arm Number Stamp)

Main Arm

Screw

Rod Screws

Forearm

Hold Open Control

Arm Foot

Main Arm

Hold Open1687Drop Plate

For low ceiling

clearance

Optional Components

Hold Open Control

(Hold Open Models)

Hold Open Control

(Hold Open Models)

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2534-020 Rev 2 04/20

• For special applications, a separate door and frame

preparation template is packed with these instructions. Use

this instruction sheet for installation sequence and closer

adjustments only.

• Doors should be hung on ball bearing or anti-friction hinges.

• Door and frame must be properly reinforced.

Mounting Hardware Door or Frame Drill

Closer:

1/4-14 x 1-1/2 Oval Flat Head Mach. Screw Wood 3/16" (4.76mm)

Closer:

1/4-20 x 3/4 Oval Flat Head Mach. Screw Metal Drill #7 (.201 dia. or 5.10mm)

Tap 1/4-20

Arm Foot:

Sleeve Nut and Bolt (SNB)

Hollow Metal 9/32" (7.00mm) thru

3/8" (9.50mm) door face opposite to closer

Aluminum or Wood 3/8" (9.50mm) thru

Arm Foot:

Thru Bolt and Grommet Nut (TBGN)

(optional)

All

9/32" (7.00mm) thru

3/8" (9.50mm) dia. x 3/8" (9.500mm) deep,

door face opposite to closer

• Always consult door/frame manufacturer for fastener

compatibility.

• Adjust closing time speed between 4 and 7 seconds from

90° to 0°. Use of door by handicapped, elderly or small

children may require greater closing time.

• These door closers should NOT be installed on exposed side

(weather side) of exterior doors.

• Dimensions are given in inches (millimeters).

ATTENTION:

An incorrectly installed or improperly adjusted door closer can

cause property damage or personal injury. These installation

instructions should be followed to avoid the possibility of

misapplication or misadjustment.

J1600 UniTrol Arm Closer

Closer Adjustments

Latch Backcheck

Use provided 1/8" hex wrench to

turn valves.

NEVER force valves out of closer.

NEVER completely close

backcheck valve. Backcheck

is not a positive stop.

Door must be open to adjust

spring closing power. Refer to

chart.

Do not use a power drill.

Warranty will be void. Sweep

To p

Jamb

Do not over tighten

screws

Pinion Cap

Screw pinion cap onto pinion

shaft by hand or with a Phillips

screwdriver.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2534-020 Rev 2 04/20 3

J1600 UniTrol Arm - Top Jamb Mount Installation (Right Hand Shown)

Notes:

1. IMPORTANT: Installation instructions cover

either non hold open or hold open models.

2. If ceiling clearance is between 1-3/4" and

2-5/8" (44 - 67mm), use 1687 Drop Plate.

Prepare door and frame accordingly.

3. Using dimensions for hold-open or stop

angle desired, mark and drill

• Four (4) holes on frame face for closer

(or drop plate)

• Two (2) holes on door for arm foot

4. UNI1601 ONLY: Set approximate closing

power using “Spring Power Adjustment”

chart on page 2.

9-1/16

(230.2) 3/4

(19.1)

1/2

(13)

3-3/4

(95)

(51) 4-1/8

(104.8)

Hinge or Pivot

Opening Dimension A

Hold Open Stop Inches (mm)

85° 90° 9-1/8 (232)

90° 95° 8-3/8 (213)

95° 100° 7-3/4 (197)

100° 105° 7-3/8 (187)

105° 110° 6-3/4 (171)

110° 115° 6-1/2 (165)

Hollow Metal or Wood Openings Template

Aluminum Openings Template

9-1/16

(230.2) 3/4

(19.1)

1/2

(13)

3-3/4

(95)

(25) 4-1/8

(104.8)

Hinge or Pivot

1. Prepare door and frame.

Arm Identication (Stamped on Arm)

Reveal Non Hold

Open

Hold

Open

0" - 3/8"

(0 - 10mm) J6600-4 J6600-7

1/2" - 2"

(13 - 50mm) J6200-4 J6200-7

2-1/8" - 3-1/4"

(55 - 83mm) J6100-4 J6100-7

3-3/8" - 4-1/4"

(85 - 108mm) J6400-4 J6400-7

4-3/8" - 5-3/8"

(111 - 137mm) J6500-41 J6500-71

5-1/2" - 6-3/8"

(140 - 162mm) J6500-42 J6500-72

6-1/2" - 7-3/8"

(165 - 187) J6500-43 J6500-73

Arm Foot

Rod Unit

(Arm Number Stamp)

Arm Screw

Forearm

Hold-Open

(Models suffixed “H”)

Main Arm

Power Adjustment Shaft

“BC”

Pinion Cap

Reveal

Arm Foot

Rod Unit

(Arm Number Stamp)

Arm Screw

Forearm

Hold-Open

(Models suffixed “H”)

Main Arm

Power Adjustment Shaft

“BC”

Pinion Cap

Reveal

Norton is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 80-9316-2534-020 Rev 2 04/20

Norton Technical Product Support:

Monroe, NC 28112 USA

Phone: 800.438.1951 ext: 6030

TechSupport.Norton@assaabloy.com

nortondoorcontrols.com

You’ve now installed the 1600 UniTrol Arm Closer - Top Jamb Mount.

🛑

Go to page 2 for closer adjustments and decorative cap installation.

S and L valves

TOWARD hinge

2. Mount closer. 3b. Install separate arms.

RH and LH:

Position at at S

4. Connect arms and install rod screws. 5. Preload spring and tighten rod screws.

1st

2nd Rotate elbow until

forearm is perpendicular

to frame.

Rotating arm

preloads closer

spring power.

1st

2nd

3a. Remove rod unit

from slide unit.

Aluminum: Rod on bottom

Metal/Wood: Rod on top

Long side of foot always

TOWARD hinge

Dieses Handbuch passt für folgende Modelle

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy SARGENT FM8700 Bedienungsanleitung

Assa Abloy

Assa Abloy Effeff 843G Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin PED5800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW200i Bedienungsanleitung

Assa Abloy

Assa Abloy besam PUSH-N-GO Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC700 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 78-B/FHA Hold Open Series Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-FMS Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YM Series Bedienungsanleitung

Assa Abloy

Assa Abloy 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5700 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 3000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 2900 FIREGUARD Bedienungsanleitung

Assa Abloy

Assa Abloy 5800 ADAEZ PRO Bedienungsanleitung

Assa Abloy

Assa Abloy MAB 609 + AC593 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC3210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood L7714SDSIL Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 1331 Bedienungsanleitung

Assa Abloy

Assa Abloy King 640 Bedienungsanleitung

Assa Abloy

Assa Abloy UNION DoorSense 8755A Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung