AT&T MERLIN 410 Bedienungsanleitung

MERLIN

COMMUNICTIONS SYSTEM

SERVICE MANUAL

MODELS 206 AND 410

American Bell

Advanced Information Systems

An AT&T Company

SERVICE MANUAL

MERLIN

✽

COMMUNICATIONS SYSTEM

MODELS 206 AND 410

* Trademark of AT&T Co.

Printed in U.S.A.

Issue G, August 1983 999-501-135 AB

CONTENTS

INTRODUCTION

HOW TO USE THIS MANUAL

PREINSTALLATION

INTRODUCTION

IMPORTANT TELEPHONE NUMBERS

GETTING STARTED

A. Checking the Floor Plan

B. Checking the Shipment

C. Getting the Tools You Need

CIB CROSS REFERENCE

INSTALLATION

INSTALLING THE CONTROL UNIT

Environmental Requirements

A. Positioning the Control Unit

B. Installing the Cartridges

C. Supplying Power to the Control Unit

D. Connecting the Control Unit to the Network Interface

E. Setting the Control Unit Switches

“Tone-Pulse” Switch

“Ringing” or “Outward Calls” Switches

INSTALLING THE CORDS/CABLES

A. Installing the Voice Terminal Extension Cords

B. Voice Terminal Cabling

Getting Started

Planning and Arranging the Control Unit and Jacks

Installing the Cable

Labeling the Cables

Installing the Jacks at the Control Unit Location

Fastening the Cable(s)

Installing the Jacks at the Voice Terminal Location

C. Installing the Voice Terminals

Getting Started

Assembling the Voice Terminals

TESTING PREPARATION

TESTING THE VOICE TERMINALS

TESTING THE SYSTEM

LABELING THE VOICE TERMINAL INTERCOM NUMBERS

SYSTEM CHANGES

INTRODUCTION

TO CHANGE CONTROL UNIT SWITCHES

TO ADD AN OUTSIDE LINE

TO ADD A VOICE TERMINAL

TO ADD A VOICE TERMINAL ACCESSORY

TO MOVE A VOICE TERMINAL LOCATION

TO SWAP VOICE TERMINAL LOCATIONS

TO ADD A CARTRIDGE

QUICK CHECK TESTS

INTRODUCTION

QUICK CHECKS TO DETERMINE WHETHER THE TROUBLE IS IN YOUR

SYSTEM

SYMPTOM-BASED QUICK CHECKS

Symptom List

A.Voice Terminal Does Not Ring

Basic Service

Feature Package 1 Service

Cannot Make an Outside Call

Basic Service

Feature Package 1 Service

Trouble with Indicator Lights, Speaker, or Ringing

Some Custom Features Do Not Work

All Voice Terminals Have No Lights and No Dial Tone (Entire System

Down)

GENERAL QUICK CHECKS

IF TROUBLE REMAINS

MAINTENANCE EXCHANGE PROCEDURES

INTRODUCTION

HOW TO USE THIS MANUAL

This Service Manual provides instructions for installing, changing and adding, troubleshoot-

ing, and, if necessary, replacing components on your MERLIN* communications system. It is

intended for use by the person in your company who is responsible for telephone service.

Reading the whole manual is not necessary; you need only read the introduction and those

sections relevant to the task you have to perform.

This manual is divided into five sections:

●Preinstallation: Contains instructions to prepare for the installation of your MERLIN

communications system.

●Installation: Contains instructions for installation and preliminary testing of your

MERLIN communications system.

●System Changes: Provides directions for changing and adding to your MERLIN com-

munications system.

Quick Check Tests: Describes simple tests to identify the source of problems your

●

MERLIN communications system may have.

●Maintenance Exchange Procedures: Describes how American Bell allows you to

exchange faulty equipment for working replacements.

Note: Notices required by the FCC are printed in the User’s Guide inside the front and

back covers. You should be familiar with this information before installing your

new equipment.

Descriptive and operational information is provided in the User’s Guide. Customer Informa-

tion Brochures (CIBs) describe the physical characteristics of each device and provide instal-

lation instructions. One CIB is packaged with each voice terminal or other system com-

ponent. Both the CIB and this manual are required for proper component installation.

* Trademark of AT&T Co.

PREINSTALLATION

INTRODUCTION

If you are installing your own MERLIN communications system, use the instructions in the

“Preinstallation” and “Installation” sections. These instructions are divided as follows:

Getting Started

●

●Installing the Control Unit

Installing the Cords/Cables

●

Installing the Telephones (Voice Terminals)

●Testing the Telephones (Voice Terminals)

●

Testing the System

●Labeling the Telephone (Voice Terminal) Intercom Number

Whenever you see a DANGER, Warning, or Caution, please read it carefully. These

terms mean the following:

●DANGER — Possibility of personal injury.

●Warning — Possibility of equipment damage.

●Caution — Possibility of service interruption.

IMPORTANT TELEPHONE NUMBERS

●For questions concerning installation or repair, call the American Bell toll-free

HELP number:

1-800-628-2888

●To order equipment from the National Sales Center, call the American Bell toll-free

SALES number:

1-800-247-1212

GETTING STARTED

This section helps you get ready to install your MERLIN communications system. Begin by

checking the floor plan that you prepared with your order, verifying the equipment received,

and getting the tools you need. After you complete each step, check it off in the box on the

left.

A. Checking the Floor Plan

❑Check the floor plan that you prepared when you ordered your system, to make sure

that it agrees with the layout of the installation location. Figure 1 show a typical sys-

tem.

10–BUTTON

VOICE TERMINAL

D8AF TERMINAL

EXTENSION

CORD

LINE

CORDS

D8W MODULAR

TERMINAL CORD

MODEL 206 CONTROL UNIT

NETWORK

INTERFACE

MODULAR

Figure 1

Preinstallation (cont’d)

B. Checking the Shipment

❑Open all packages and make sure you have all the items you ordered. Use your copy of

tion” section.

the order form to check your shipment.

For help in identifying items, refer to Figure 2 (Illustrated Parts List). If there are any

discrepancies, call your sales representative or the HELP number provided in the “Introduc-

Note 1:

Note 2:

Note 3:

Do not discard Customer Information Brochures (CIBS) included with items in

your shipment. These instructions may be referred to in this Manual. To avoid

losing the instructions, keep them with the items until you need to use them.

Do not discard the cartons and packaging material. You may have overlooked a

small item, or you may need the cartons and packing to return damaged or defec-

tive items.

Save the extra serial number tags loosely packed with the control unit, voice ter-

minals, and cartridges.

C. Getting the Tools You Need

Get the following tools:

❑

Hammer

Screwdriver

Drill and appropriate bits, 5/8-inch and smaller (if control unit, voice terminals, or the

extra-alert switch are to be mounted on a wall, or if you must route wiring through

walls).

Stapler and staples appropriate for attaching wiring to baseboard.

(6A)

CONTROL UNIT

DOOR

(6106-CU1) (6110-CU1)

2-LINE/6-TERMINAL 4-LINE/10-TERMINAL

CONTROL UNIT

MOUNTING

HOLES

TEMPLATE

MOUNTING

SCREWS

EXPANSION

BOLTS

MOUNTING

BRACKET

BASE PLATE

(CS 100A) CONTROL UNIT

WALL MOUNTING KIT (61201)

Figure 2 (1 of 6)

Andere Handbücher für MERLIN 410

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AT&T Konferenzsystem Handbücher

AT&T

AT&T Merlin 1030 Bedienungsanleitung

AT&T

AT&T Partner Plus Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 Analog Multiline... Benutzerhandbuch

AT&T

AT&T MERLIN Plus Release 1 Bedienungsanleitung

AT&T

AT&T MERLIN 410 Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 MLX Queued Call... Handbuch

AT&T

AT&T Merlin 3070 Bedienungsanleitung

AT&T

AT&T Partner Plus Bedienungsanleitung

AT&T

AT&T SPIRIT 616 Bedienungsanleitung

AT&T

AT&T Spirit Communications System Installationsanleitung

AT&T

AT&T SPIRIT SPIRIT Attendant Bedienungsanleitung

AT&T

AT&T Partner II Betriebsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 Analog Multiline... Betriebsanleitung

AT&T

AT&T SPIRIT Attendant Montageanleitung

AT&T

AT&T Merlin II Benutzerhandbuch

AT&T

AT&T Merlin 1030 Bedienungsanleitung

AT&T

AT&T Merlin 1030 Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND MLX-10 Non-Display Telephone Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 Single-Line... Bedienungsanleitung

AT&T

AT&T StaR Adapter Handbuch

AT&T

AT&T PARTNER II Release 3.1 Kurzanleitung

AT&T

AT&T Bell System 7A Bedienungsanleitung

AT&T

AT&T Merlin II Bedienungsanleitung

AT&T

AT&T MERLIN LEGEND Release 2.0 MLX Queued Call... Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung