Atdec AWM-W35 Bedienungsanleitung

AWM-W35 Page 1 of 2

Installation Guide

AWM-W35

Wall Channel

IMPORTANT INFORMATION

!Please ensure this product is installed as per these installation instructions.

! The manufacturer accepts no responsibility for incorrect installation.

!This product is not suitable for outdoor use.

!Do no use this product for mobile application.

!Wall Bracket only achieves maximum weight rating when appropriately fastened to a wall of adequate structural capacity.

!Professional installer to ensure adequate structural capacity of wall (including appropriate safety factor) to support total

weight of all equipment being mounted.

!Drilling into electrical wires can cause death - use appropriate equipment and caution when drilling holes in walls to avoid

electrical cables, water pipes and gas pipes. Do not drill into structures unless you have established it’s safe to do so.

!This product is only compatible with AWM Series products, including: AWM-A13, AWM-A46, AWM-A71 and AWM-ADC.

!This product is not compatible with the AWM Heavy Duty Heads, including: AWM-LTH and AWM-LR.

Wall channel

(x1)

Nylon

Anchor (x3)

Top Cap

Screws

(x2)

Top Cap

(x1)

M6 x 50mm

Countersunk

Screw (x3)

COMPONENT CHECKLIST

REQUIRED TOOLS

• Power drill

• Suitable drill bit

• Driver bit for

selected wall

fasteners

• Stud nder

• Spirit level

WEIGHT RANGE

0 - 12kg

(0 - 26.5lb)

Monitor weight should be within

the weight range of all modular

elements that make up the complete

monitor mounting solution.

AWM-W35 Page 2 of 2

3. Install top cap 4. Cable clips

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

Phillips Head

Screwdriver

Top Cap

3.1 Attach Top Cap 4.1 Push the cable down into the Cable Clip.

4.2 Insert one side of the Cable Clip into

the Channel on the Post assembly or Wall

Channel, before pushing the other side in.

NOTE: Cable clips sold separately

in packs of four.

2. Fit channel clamp to wall channel

2.1 Ensure knob is undone. 2.2 Slide clamp into channel. 2.3 Hold clamp in desired position on

post and turn knob to lock in place.

1. Ensure Knob is undone

Push knob to

aid insertion

Tip: push knob

to aid insertion

2. Slide clamp into channel

3. Hold clamp in desired position on post and turn

knob to lock in place

1. Mount the Wall Bracket to the Wall

8mm (5/

16”) holes

Nylon anchors

M6 x 50mm

Screws

4mm (5/

32”)

holes

Stud

M6 x

50mm

Screws

OPTION 1: Masonry OPTION 2: Timber stud

Using the Wall

Channel as

a template,

mark the

three xing

hole positions

for drilling.

NOTE: On a Stud

Wall, use a good

quality Stud Finder

to position mounting

fasteners in the

centre of studs.

NOTE: Wall Channel

must be level. Verify

using a quality spirit

level tool positioned

along the side edge

of the wall channel.

Andere Atdec Rack & Stand Handbücher

Atdec

Atdec VF-AT-NP Bedienungsanleitung

Atdec

Atdec Visidec Focus Micro Betriebsanleitung

Atdec

Atdec AV Cart 75 Bedienungsanleitung

Atdec

Atdec Visidec Focus Micro Bedienungsanleitung

Atdec

Atdec AWM-W6 Bedienungsanleitung

Atdec

Atdec AWMS-2-D13-C Bedienungsanleitung

Atdec

Atdec AD-TVAC-CM Bedienungsanleitung

Atdec

Atdec AWM-LR Bedienungsanleitung

Atdec

Atdec AWM-WS Bedienungsanleitung

Atdec

Atdec AWMS-BT40 Bedienungsanleitung

Atdec

Atdec ADBS-2x1-17TC Bedienungsanleitung

Atdec

Atdec AWM 710 Arm Bedienungsanleitung

Atdec

Atdec AWMS-46W35 Bedienungsanleitung

Atdec

Atdec Telehook Bedienungsanleitung

Atdec

Atdec A-STSWW-A Bedienungsanleitung

Atdec

Atdec AD-AC-PH Bedienungsanleitung

Atdec

Atdec Visidec VF-AT-NP Bedienungsanleitung

Atdec

Atdec AF-AT Bedienungsanleitung

Atdec

Atdec Visidec Focus Articulated Arm Wall Betriebsanleitung

Atdec

Atdec AD-WM-7060 Bedienungsanleitung

Atdec

Atdec AWM-LR Bedienungsanleitung

Atdec

Atdec TH-1040-CTS Bedienungsanleitung

Atdec

Atdec AD-TVC-70A Bedienungsanleitung

Atdec

Atdec AD-TVC-70R Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung