Avenview FO-DP4K-300-EMIX Bedienungsanleitung
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video...
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: FO-DP4K-300-EMIX
4K DisplayPort Extender over
Single SC Fiber Optic Cable
2560x1600
WQXGA
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page
3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS
..............................................................................................................1
....................................................................................................................1
1.2 SAFETY INSTRUCTIONS
........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................4
5.INSTALLATION ...................................................................................................................................8
5.1 Before Installation ..........................................................................................................................9
6. OPTICAL FIBER HAZARD ..............................................................................................................10
7.1 Trouble Shooting depending on LED indicator status .................................................................11
8. CAUTION ..........................................................................................................................................11
9.DISPLAY PORT PIN ASSIGNMENT .................................................................................................12
10.SPECIFICATIONS ..............................................................................................................................13
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
3. APPLICATION DIAGRAM ..................................................................................................................5
4. PANEL DESCRITION.... ........................................................................................................................6
4.1 FRONT PANEL (Sender, FO-DP4K-300-EMIX-S) .......................................................................6
4.2 REAR PANEL (Sender, FO-DP4K-300-EMIX-S) ...........................................................................6
4.3 FRONT PANEL (Receiver, FO-DP4K-300-EMIX-S) .....................................................................7
4.4 REAR PANEL (Receiver, FO-DP4K-300-EMIX-S) ........................................................................7
5.2 Cable Specification .........................................................................................................................9
5.3 Installation Steps .. ........................................................................................................................10
7.GENERAL TROUBLESHOOTING ...................................................................................................11
www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the Fiber Optic cable. Save this manual for future
reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview FO-DP4K-300-EMIX, Display port Extender over fiber Optic has been tested for conformity to safety regulations
and requirements, and has been certified for international use. However, like all fibre optic products, the FO-DP4K-300-EMIX
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk
of damage to the unit.
On no account should you:
! Look into a fiber while the system lasers are on;
! Use unfiltered handheld magnifiers or focusing optics to inspect fiber connectors;
! Connect a fiber to a fiberscope while the system lasers are on;
! Touch the end of the fiber connectors;
! Pull forcefully on the fiber cable;
! Reuse any specified fiber cleaning material more than once;
! Touch the clean area of a any specified fiber cleaning material;
! Use alcohol around an open flame or spark - Alcohol is Very flammable;
! Use alcohol or wet cleaning without a way to ensure that it does not leave residue on the polished connector;
! Dismantle the housing or modify the connector.
1. GETTING STARTED
www.avenview.com Page
2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
LASER RADIATION
DO NOT STARE INTO BEAM
< 1 MILLIWATT LASER DIODE
CLASS 2 LASER PRODUCT
Risk levels increase. These lasers emit a visible beam, from
400 to 780 Nanometres (nm), with an upper power limit of 1
milliwatt. An example is a (mw) bar code scanner.
Momentary viewing is not hazardous, but extended viewing
is. Laser protective eyewear is recommended for even
momentary viewing and necessary for extended viewing
DO NOT TAMPER WITH THE FIBER CABLE; DOING SO
WILL VOID THE WARRANTY AND CONTINUED USE
OF THE PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON
A SURFACE, IT SHOULD BE IN A GROUNDED
ENVIROMENT.
www.avenview.com Page
3
2. INTRODUCTION
The Avenview FO-DP4K-300-EMIX-SET ULTRA HD Extender set over single SC optical fiber cable has been designed to
extend 4K (3840x2160 or 4096 x 2160) @60Hz video and multi-channel audio formats to any 4K compatible monitor up to 300m.
Video Signals: 4k2k@ 60 (ultra HD), 3D and full HD 1080p@60 Hz.
The FO-PD4K-300-EMIX-SET includes two (2) units: Sending unit (TX) FO-DP4K-300-EMIX-S and Receiving unit (RX)
FO-DP4K-300-EMIX-R with one (1) FTP output port which allows the user to extend video and audio up to 300m (1000ft).
The FO-DP4K-300-EMIX-SET input and output supports HBR2 cable assembly to handle upto 5.4Gbps/lane data rate.
The bonus features is the NEW box type design which can be easily installed into any enviroment, behind the monitor and
rack mounted on a rack shelf. This features has been added to the unit to give the installer and user a complete solution with
the new trends in rack mounted 4K sources streaming, network connected devices and new demand in Smart TV, ultra HD
monitors and content.
- Input: Displayport 1.2a with 3D & ULTRAHD, 1080p,DPCP compliant;
- Bandwidth: from 21.6 Gbps;
- Video Data Rate: 5.4 Gbps;
- HD resolutions: up to ULTRA HD (3840x2160/4096 x 2160@60Hz) WQXGA 2560x1600@60Hz and 1080p (1920x1080@60Hz);
- Audio supported: lpCM 7.1CH, Dolby TrueHD, Dolby Digital plus and DTS-HD Master Audio;
- Audio transmission: (32-192kHz sample rate);
- MST (Multi-Stream) Supported;
- Distance: up to 300 meters over OM3 SC Fiber Optic cable.
Audio signals: Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD).
- MST will be supported if the source device can support MST.
- A DisplayPort 1.2 MST-capable hub.
- A DisplayPort 1.2 MST-capable monitor(s).
- Displaying 4K Ultra HD resolution would require the standard DisplayportI cable and display for accurate results.
NOTE:
www.avenview.com Page
4
2.1 PACKAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
1
(FO-DP4K-300-EMIX-SET)
FO-DP4K-300-EMIX-S (TX)
FO-DP4K-300-EMIX-R (RX)
2POWER ADAPTER (5V/2A DC) X2
DISPLAYPORT (COPPER CABLE - 3FT) X 2
USER ’S MANUAL X 1
X1
X1
3
4
www.avenview.com Page
5
3. APPLICATION DIAGRAM
www.avenview.com Page
6
4. PANEL DESCRIPTION
4.1 FRONT PANEL (Sender, FO-DP4K-300-EMIX-S)
1. LED LIGHT: Green light indicates an active
connection.
2. DISPLAYPORT IN:
4.2 REAR PANEL (Sender, FO-DP4K-300-EMIX-S)
1 2
1. OPTICAL OUT: Connect SC type connector
OM3 rated fiber For media streaming
linking to Receiver
2. 5V 2A Power Supply Jack: Connect provided
power adapter for power supply
Displayport cord interface
2
13
3.MODE: A. Default mode: video output level is set low to increase compatibility with equipment that is
sensitive to jitter characteristics
B. Manual mode: video output level is set high to increase compatibility with equipment that is
sensitive to EYE pattern characteristics
www.avenview.com Page
7
4.3 FRONT PANEL (Receiver, FO-DP4K-300-EMIX-R)
4.4 REAR PANEL (Receiver, FO-DP4K-300-EMIX-R)
1 2
1. LED Light: Green light indicates an active
connection.
2. Displayport OUT
1. OPTICAL IN: Connect SC type connector
OM3 rated fiber For media streaming
linking to Sender
2. 5V 2A Power Supply Jack
1 2 3
3.MODE: A. Default mode: enable link training and automatically attempts to match the monitor output
B. Manual mode: disable link training and pre-set the output signal characteristics (most
compatible setting values is pre-set based on testing of different displays)
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Avenview Extender Handbücher
Avenview
Avenview FO-DVI-1000M-EMI Bedienungsanleitung
Avenview
Avenview HDM3D-C53X-SET Bedienungsanleitung
Avenview
Avenview FO-DVI-1080LC-Set Bedienungsanleitung
Avenview
Avenview VGA-C5R-SET Bedienungsanleitung
Avenview
Avenview HDM-C6IP-SET Bedienungsanleitung
Avenview
Avenview VGA-C5-SP-4 Bedienungsanleitung
Avenview
Avenview HDMI-C5-3-SET Bedienungsanleitung
Avenview
Avenview VGA-C5A-SET Bedienungsanleitung
Avenview
Avenview HBT-C6POE-R Bedienungsanleitung
Avenview
Avenview HBT2-C6BPOC-SET Bedienungsanleitung
Avenview
Avenview HDM3D-C5IR-SET Bedienungsanleitung
Avenview
Avenview C5-USB-200 Bedienungsanleitung
Avenview
Avenview C5-USB-200 Bedienungsanleitung
Avenview
Avenview HBT-C6BPOC-SET Bedienungsanleitung
Avenview
Avenview HDM-C5SP-4 Bedienungsanleitung
Avenview
Avenview DVI-C5-M-SET Bedienungsanleitung
Avenview
Avenview VGA-C5ARS-SET Bedienungsanleitung
Avenview
Avenview HDMI-C5SP-8SRSR Bedienungsanleitung
Avenview
Avenview FO-DP-XX-MM Bedienungsanleitung
Avenview
Avenview VGA-C5-SP-8 Bedienungsanleitung
