Avenview FO-DVI-1000X-EMIX Bedienungsanleitung

www.avenview.com

DVI Extender over single multi-mode

SC Fiber TMDS video and EDID data

Model #: FO-DVI-1000X-EMIX

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product deLCriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and diLClaims any express or implied warranty, relating to its

www.avenview.com

products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 4

1.6 Before Installation.................................................................................................................. 4

1.7 Installation ............................................................................................................................. 5

1.8 Troubleshooting..................................................................................................................... 6

1.9 Caution................................................................................................................................... 6

Section 2: Specifications......................................................................................................................... 7

2.1 Signal Pin Assignment .................................................................................................................. 8

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview FO-DVI-1000X-EMIX, DVI Extender over Fiber Optic has been tested for conformity to safety

regulations and requirements, and has been certified for international use. However, like all electronic

equipment’s, the FO-DVI-1000X-EMIX should be used with care. Read the following safety instructions to

protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

Do not view directly into the laser module of transmitter or the end of the other side of optical cable

connected to transmitter with an optical instrument.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

FO-DVI-1000X-EMIX, optical DVI extension module, is designed to let digital flat panel display signal extend

over 300 meters away from host based on DVI standard by optical transmission technology.

It can transmit EDID data and HDCP over fiber in real time. FO-DVI-1000X-EMIX can be used with DVI device

as well as HDMI standard device such as Blu-ray player, PS-3.

High speed and long distance transmission by 1 channel SC type multi-mode optical fiber

Supports resolution up to HDTV / 1080P, PC / WUXGA(1920 x 1200)

TMDS video signal and EDID data is transmitted over optical fiber

Uses slim and light Aluminum case

EMC & Safety : CE, FCC

External power supply for Transmitter is (optional). Automatic power switch is included.

1.5 Package Contents

Before you start the installation of FO-DVI-1000X-EMIX, please check the package contents.

-Transmitter x 1

-Receiver x 1

-Power Adapter (5VDC, 2A) x 1

User’s Manual x 1

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.7 Installation

This product is composed of a Transmitter and a Receiver.

The Transmitter should be connected to the source (Computer’s DVI Port) and the Receiver should be

connected the DVI Port of the digital display device (Monitor). Avenview FO-DVI-1000X-EMIX Transmitter /

Receiver is designed to be used with LC type standard optical cable (Multi-Mode optical fiber: 50/125,

62.5/125um). Connect Multi-mode LC connector type 1 channel standard fiber optic cable between

transmitter and receiver. Connect power adapters (or USB power cable) to both of transmitter and receiver

module.

FO-DVI-1000X-EMIX TX can be supplied with [optional Power Adapter (5VDC, 2A)] .

LED INDICATOR STATUS

Fast blinks

The system is booting properly.

After plug adapter, LED will blink fast for 2~3 seconds

Solid

Communication between transmitter and receiver is

established.

Ready for proper operation.

Regular on/off

No communication between transmitter and receiver. Check

for fiber connection or power adapter

www.avenview.com

1.8 Troubleshooting

General Troubleshooting

Problem

Possible Solution

No Image

Check if the PC Power is on

Check if connection to the computer and the monitor are

correct.

Turn the PC Power off and on again.

Please use DC adapter (5V, 2A) included in the package for

Receiver. Optional power supply for Transmitter.

LCD Screen Defects Appear

This product supports up to WUXGA resolution.

Check the maximum resolution range of the graphics card.

1.9 Caution

1. Do not put heavy object on top of the FO-DVI-1000X-EMIX. It may cause product malfunction.

2. Put the product on even and stable location. If the product falls down or dropped, it may get

damaged.

3. Keep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity. It may

cause a fire and injury by electrical shock.

4. Use DC power adapter with correct specification. Otherwise it may cause fire.

5. .

6. Use the multimode (50/125um) optical fiber.

7. Do not view directly laser module of transmitter or the end of the other side of optical cable

connected to transmitter with optical instrument.

8. Do not twist or pull by force either ends of the optical cable. It can cause malfunction. Minimum

bending diameter is 45mm (see illustration below)

www.avenview.com

Section 2: Specifications

Item

Description

Units

(Transmitter)

(Receiver

Unit Description

DVI Fiber Optic Transmitter

DVI Fiber Optic Receiver

Input Signal

Output Signal

TMDS Signal (DVI 1.0 Standard)

Optical Converter

850nm, 4Ch Transmit OSA

911nm, 1Ch VCSEL

980nm, 1Ch PIN P/D Diode

850nm, 4Ch Receive OSA

980nm, 1Ch VCSEL

911nm, 1Ch PIN P/D Diode

Video Bandwidth

3.5Gbps

Supported Resolution &

Distance

Up to WUXGA 1920 x 1200/60Hz @ 300 meters ( 1000 feet)

DVI Connector

DVI-D Male Plug (input)

Optical Connector

1 SC Connector

Dimensions (L x W x H)

11.5” x 1.3” x .5”

Environmental

Operating Temperature

32˚~ 104˚F (0˚to 40˚C)

Storage Temperature

-4˚~ 140˚F (-20˚~ 60˚C)

Relative Humidity

20~90% RH (no condensation)

Optical

Optical Source

850nm VCSEL

O/E Converter

PIN Photo Diode

Fiber Type

50/125 LC Multi-Mode Fiber

Environmental

Operation

0˚to 50˚C Degree

Storage

-20˚ to 70˚C Degree

RESOLUTIONS

DISTANCE

WUXGA (1920 X1200)

300M (1000FT)

1080P (1920 X 1080)

300M(1000FT)

www.avenview.com

2.1 Signal Pin Assignment

TRANSMITTER

Signal Assignment

T.M.D.S. Data2-

T.M.D.S. Data1-

T.M.D.S. Data0-

T.M.D.S. Data2+

T.M.D.S. Data1+

T.M.D.S. Data0+

T.M.D.S. Data2 Shield

T.M.D.S. Data1 Shield

T.M.D.S. Data0 Shield

No Connect

+5V Power

T.M.D.S. Clock Shield

No Connect

Ground (for +5V)

T.M.D.S. Clock+

No Connect

T.M.D.S. Clock-

RECEIVER

Signal Assignment

T.M.D.S. Data2-

T.M.D.S. Data1-

T.M.D.S. Data0-

T.M.D.S. Data2+

T.M.D.S. Data1+

T.M.D.S. Data0+

T.M.D.S. Data2 Shield

T.M.D.S. Data1 Shield

T.M.D.S. Data0 Shield

No Connect

T.M.D.S. Clock Shield

No Connect

T.M.D.S. Clock+

No Connect

T.M.D.S. Clock-

Fiber Type

Wavelength (nm)

Max Attenuation

Coefficient (dB/km)

Bandwidth

(MHz-km with overfilled launch)

50/125 (OM2)

850

3.5

500

50/125 (OM2)

1300

1.5

500

50/125 (OM3)

850

3.5

2000

50/125 (OM3)

1300

1.5

500

6.25/125 (OM1)

850

3.5

160

6.25/125 (OM1)

1300

1.5

500

www.avenview.com

DiLClaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the

operation or use of Avenview hardware, software or other products and documentation deLCribed herein, for any act or omission of

Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of

anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the

Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system deLCribed herein to improve reliability,

function or design. With respect to Avenview products which this document relates, Avenview diLClaims all express or implied warranties

regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and

non-infringement.

Inhaltsverzeichnis

Andere Avenview Extender Handbücher

Avenview

Avenview FO-HDM4K-200-EMIX Bedienungsanleitung

Avenview

Avenview DVI-C5-M-SET Bedienungsanleitung

Avenview

Avenview HDM3D-C5IR-SET Bedienungsanleitung

Avenview

Avenview DVI-C5-LC-R Bedienungsanleitung

Avenview

Avenview FO-HDSDI-SET Bedienungsanleitung

Avenview

Avenview HDMI-C5-4 Bedienungsanleitung

Avenview

Avenview HDMI-C5-3X-SET Bedienungsanleitung

Avenview

Avenview VGA-C5-SP-4 Bedienungsanleitung

Avenview

Avenview HDMI-C5-IR-SET Bedienungsanleitung

Avenview

Avenview FO-DVI-DL-1000M Bedienungsanleitung

Avenview

Avenview WL-VGA-EXT Bedienungsanleitung

Avenview

Avenview HBT-C6POE-R Bedienungsanleitung

Avenview

Avenview HDM3D-C53X-SET Bedienungsanleitung

Avenview

Avenview HDMI-C5-S Bedienungsanleitung

Avenview

Avenview FO-DVI-DL-330X Bedienungsanleitung

Avenview

Avenview KVM-C5 Series Bedienungsanleitung

Avenview

Avenview HDM3D-C53X-SET Bedienungsanleitung

Avenview

Avenview HDM-C6IP-SET Bedienungsanleitung

Avenview

Avenview FO-HDM2-T4K-SET Bedienungsanleitung

Avenview

Avenview HBT2-C6BPOC-SET Bedienungsanleitung

Avenview

Avenview HDM-C6IPX-SET Bedienungsanleitung

Avenview

Avenview HDM3D-C5SP-4 Bedienungsanleitung

Avenview

Avenview FO-HDM-IP4K-SET Bedienungsanleitung

Avenview

Avenview HDM-C6IP-SET Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung