Bradley S19-630 Bedienungsanleitung

P.O. Box 309, Menomonee Falls, WI USA 53052-0309

PHONE 1-800-BRADLEY FAX (262) 251-5817

http://www.bradleycorp.com

Installation

215-085 Rev. K; EN 06-532D

Page 1 of 4 4/30/07

S19-630

Hand-Held Eye/Face Body Wash

Table of Contents

Pre-Installation Information . . . . . . . . . . . . . . . .2

Installation Instructions . . . . . . . . . . . . . . . . . . .3

Assembly of Components . . . . . . . . . . . . . . . . .4

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

WARNING

Read this installation manual completely to ensure proper installation, then file it

with the owner or maintenance department. Compliance and conformity to drain

requirements and other local codes and ordinances is the responsibility of the

installer.

Separate parts from packaging and make sure all parts are accounted for before

discarding any packaging material. If any parts are missing, do not begin

installation until you obtain the missing parts.

Flush the water supply lines before beginning installation and after installation is

complete. Test the unit for leaks and adequate water flow. Main water supply to

the eyewash should be “ON” at all times. Provisions shall be made to prevent

unauthorized shutoff.

The ANSI Z358.1 standard requires an uninterruptable supply of flushing fluid at

a minimum 30 PSI (0.21 MPa) flowing pressure. Flushing fluid should be tepid per

ANSI Z358.1.

The inspection and testing results of this equipment should be recorded weekly

to verify proper operation. This equipment should be inspected annually to

ensure compliance with ANSI Z358.1.

Workers who may come in contact with potentially hazardous materials should be

trained regarding the placement and proper operation of emergency equipment

per ANSI Z358.1.

For questions regarding the operation or installation of this product, visit

www.bradleycorp.com or call 1-800-BRADLEY.

Product warranties may also be found under ”Product Information” on our web

site at www.bradleycorp.com.

Installation

THIS

SIDE

Packing List

P.O.Box309, MenomoneeFalls, WI 53051

TESTTHISUNITEACHWEEK

Test-operatevalve(s) each week and sign below.

Reportany malfunctions immediately.

Ventil(e)wöchentlich im Testbetrieb prüfen, bestätigt

durchUnterschrift. Jegliche Störung sofort melden.

Date

Datum

Date

Signed

Unterschrift

Signe

Date

Date Signed

Signed

DIESESGERÄT1STWÖCHENTLICHZUPRÜFEN.

ESSAIHEBDOMADAIRE

Testle fonctionnement des valves chaque semaine et

signeen bas. S'il y à quelque chose qui ne va pas fait

unrapport immédiatement.

P.O.BOX309, MENOMONEE FALLS,WI 53052-0309 USA

TEL:1-800-BRADLEY FAX: (262-251-5817)

http://www.bradleycorp.com

114-051

S19-630 Installation

4/30/07 Bradley Corporation • 215-085 Rev. K; EN 06-532D

Installation

Step 1: Install mounting bracket to

wall

NOTE: Make sure that, when mounted, the

eye wash unit will measure 33-45 inches from

the top of the sprayheads to the finished floor.

For usage as an eye/face wash, the top of the

sprayheads of the S19-630 must be 33–45

inches from where the user stands per ANSI

Z358.1. The unit must also be placed a

minimum of 6" away from the nearest wall or

obstruction.

1. Install three suitable wall anchors for use

with 3/8" bolts (supplied by installer) into

the wall at the desired location (see

Figure 1a for eye wash dimensions and

Figure 1b for bracket dimensions).

2. Bolt the mounting bracket to the wall

using three 3/8" bolts (supplied by

installer).

Step 2: Assemble eye/face

body wash unit

1. Assemble the component parts as

shown in Figure 2 on page 4.

• Be sure to apply pipe sealant to

all pipe joints.

Step 3: Connect water supply

1. Connect the water supply to the

unit (piping supplied by

installer).

2. Mount the safety sign to the wall

using the sign-mounting

hardware supplied by installer.

3. Open the water supply line. Test

for leaks and adequate water

flow.

Installation S19-630

Bradley Corporation • 215-085 Rev. K; EN 06-532D 4/30/07

10-3/4"

(273mm)

8-3/4"

(222mm)

15"

(381mm)

33-45"

(838-1143mm)

TO FINISHED

FLOOR

Figure 1a

(51mm)

(102mm)

(51mm)

4-3/8"

(111mm)

7/8"

(22mm)

Figure 1b

Assembly of Components and Parts List

S19-630 Installation

4/30/07 Bradley Corporation • 215-085 Rev. K; EN 06-532D

1 S05-064D 1 EFW Assembly

1.1 S05-091P 1 Yoke Assembly

1.2 S05-135 2 Sprayhead Assembly

1.3 S53-063 2 Dust Cover

2 113-918 1 Pipe, Plated

3 110-212 2 Nut, Lock

4 141-008 1 Hanger

5 269-1096 1 Handle

6 S30-070 1 Valve/Handle Prepack

6.1 S27-282 1 1/2" Ball Valve with Nut

6.11 110-215 1 Nut only

6.2 142-002DA 1 Lockwasher

6.3 S08-336 1 Handle Assembly

6.4 153-372R 1 Adapter

7 269-053 1 Hose, 12’

8 169-078 1 Adapter

9 S70-094 1 Wall Bracket

10 114-051 1 Safety Sign

11 204-421 1 Emergency Tag

Item Part No. Qty Description Item Part No. Qty Description

6.2

6.11

6.3

6.1

1.2

1.3

1.1

P.O.BOX309

MENOMONEEFALLS,WI53052-0309USA

TEL:1-800-BRADLEYFA X:(262-251-5817)

http://www.bradleycorp.com

P.O. B OX 309, MENOMONEE FALLS,WI 53052-0309 USA

TEL:1-800-BRADLEY FAX:(262-251-5817)

http://www.bradleycorp.com

114-051

P.O. B ox 309, Menomonee Falls, WI 53051

TESTTHISUNIT EACH WEEK

Test-operate valve(s) each week and sign below.

Report any malfunctionsimmediately.

Ventil(e)wöchentlich im Testbetrieb prüfen, bestätigt

durch Unterschrift.Jegliche Störungsofort melden.

Date

Datum

Date

Signed

Unterschrift

Signe

Date

Date Signed

Signed

DIESESGERÄT1ST WÖCHENTLICH ZU PRÜFEN.

ESSAI HEBDOMADAIRE

Test le fonctionnement desvalveschaque semaine et

signe en bas. S'il y à quelque chose qui ne va pasfait

un rapport immédiatement.

1/2" IPS

SUPPLY

INLET

6.4

Figure 2

NOTE: Items 1–5 come preassembled.

Prepack S30-071 includes Items 6.11, 6.2, 6.3 and 6.4

Inhaltsverzeichnis

Andere Bradley Sanitärprodukte Handbücher

Bradley

Bradley S19-120G Bedienungsanleitung

Bradley

Bradley Verge Crestt Series Kurzanleitung

Bradley

Bradley Express Crescent CRS-2/IR Bedienungsanleitung

Bradley

Bradley Advocate AV Series Bedienungsanleitung

Bradley

Bradley S19-270HD Bedienungsanleitung

Bradley

Bradley S19-465EFW Bedienungsanleitung

Bradley

Bradley S19-304GA Bedienungsanleitung

Bradley

Bradley Aerada 1200 Series Bedienungsanleitung

Bradley

Bradley COMBI5500 Handbuch

Bradley

Bradley Sentry SN2013/IR Bedienungsanleitung

Bradley

Bradley S19-465 Bedienungsanleitung

Bradley

Bradley WS-1X Bedienungsanleitung

Bradley

Bradley Verge LVSD2 Bedienungsanleitung

Bradley

Bradley S19-270C Bedienungsanleitung

Bradley

Bradley Sentry SN2008/IR Bedienungsanleitung

Bradley

Bradley MG-2/BIR3 Bedienungsanleitung

Bradley

Bradley Express SS Series Bedienungsanleitung

Bradley

Bradley Express SS-2N/BIR3/STD Bedienungsanleitung

Bradley

Bradley Express MG Series Bedienungsanleitung

Bradley

Bradley Express SS-2 Infrared-to-Touch Time Bedienungsanleitung

Bradley

Bradley Verge LVQD1 Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley S19294 Series Bedienungsanleitung

Bradley

Bradley SN2013/AST4 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema