Bradley Verge LVSD2 Bedienungsanleitung

Installation

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

215-1829 Rev. C; ECN 18-08-010A

Page 1 of 12 7/25/2018

LVSD2

Verge®Lavatory System – LVS-Series

with Evero®Natural Quartz Material

Table of Contents

Components ..................................................................3–4

Supplies Required .............................................................5

Dimensions....................................................................5–6

Rough-Ins .......................................................................7-8

Bracket Mounting...............................................................9

Drain Assembly .................................................................9

Faucets and Optional Soap Valve ...................................10

Bowl Mounting .................................................................10

Strainer and P-trap ..........................................................10

Adjust Temperature..........................................................11

Trap Cover .......................................................................11

Cleaning and Maintenance..............................................12

LVSD2 Installation

27/25/2018 Bradley • 215-1829 Rev. C; ECN 18-08-010A

WARNING

Make sure that all water supply lines have been flushed and then completely turned off before beginning

installation. Debris in supply lines can cause valves to malfunction.

Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical

power MUST remain off until installation is complete.

Installer's hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out

rating of 1,000 pounds.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file this

manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances

is the responsibility of the installer. Product warranties may be found under “Products” on our Web site at

www.bradleycorp.com.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging

material. If any parts are missing, do not begin installation until you obtain the missing parts.

For standard height mounting, do not exceed the recommended 33.5" distance from the fixture rim to the

finished floor.

Installation LVSD2

Bradley • 215-1829 Rev. C; ECN 18-08-010A 7/25/2018 3

Components

Bowl

Contact your Bradley Representative for

color options

Individual Rough-In Option

Chrome P-trap (S29-094)

Plastic P-trap (269-1697)

Complete Drain Prepack

(S45-2862)

O-Ring

(125-111)

Drain

Adapter

Packing

Washer

#10-24

Screw

Drain

Adapter

Prepack

(S45-2480)

Prepack

(S45-2861) *Screw

Strainer

*Standoff, Hex,

SS #6-32 x 1"

*Screw #6-32

x 1-1/4" Pan

*Included in

Prepack S45-2778

Access Panel

(186-1905)

Wall Bracket

(140-1128)

TMV Valve

(1/2" NPTM

Outlet)

(S45-2701)

Hose Prepack

(S45-2730)

Supply

Fittings

(S45-2510)

TMV Supply

Connections

Plastic Hose

Supply Fittings

(S45-2511)

Hose Prepack

(S45-2731)

Tempered Supply

Connections

Plastic

Hose

Plastic Hose

Stainless

Steel

Hose

LVSD2 Installation

47/25/2018 Bradley • 215-1829 Rev. C; ECN 18-08-010A

Components

IR-DCD Faucet*

(S53-336)

CAP-DCR

Faucet (S53-353) Battery Box for

CAP-DCR Faucets

6315-KT0000 Soap Dispenser 6324-68 Soap Dispenser 6334 Soap Dispenser

Optional

Transformer

Plug-In Transformer

Option (PT) for

IR-DCD Faucet

(S53-337)

Plug-in transformer option (PT)

includes Transformer (S53-338),

Adapter (S53-339), and Grounding

Kit (S53-349) for CAP-DCR Faucets

IR-DCG Faucet*

(S53-350)

Plug-In Transformer

Option (PT) for

IR-DCG Faucet

(153-486)

*Adapter S45-2872 included with faucet *Adapter S45-2872 included with faucet

Installation LVSD2

Bradley • 215-1829 Rev. C; ECN 18-08-010A 7/25/2018 5

Dimensions

Top View (shown with CAP-DCR faucet and 6315 soap as shared soap)

Front View

Supplies Required

• (6) 3/8" fasteners and wall anchors (minimum pull-out rating of 1,000 lbs.)

• (2) 1/4" fasteners and wall anchors (minimum pull-out rating of 100 lbs.)

• 1/2" hot/cold or tempered stub-out(s)

• 1-1/2" NPT drain stub-out(s)

• OPTIONAL: (2) 110 volt GFCI protected electrical outlets for 100–120 VAC plug-in transformers only

• Screen filter(s) as needed, if not included with faucet(s)

15"

(381mm)

21"

(533mm)

4-1/4"

(165mm)

15"

(381mm)

(51mm)

(152mm)

38-3/8"

(975mm)

60"

(1524mm)

12-7/8"

(327mm)

1-7/8"

(48mm)

A A

A = Personal soap locations

LVSD2 Installation

67/25/2018 Bradley • 215-1829 Rev. C; ECN 18-08-010A

Dimensions – Side View

13"

(330mm)

13¹⁄₈"

(333mm)

10¹⁄₈"

(257mm)

18½"

(470mm)

ADA/TAS Standard

Height

ADA/TAS Juvenile Height

(Children 6-12 years)

CSA Standard

Height

OBC Standard

Height

AODA-2015

Standard Height

Dim A 33-1/2" (851mm) 31" (787mm) 33

-1/2"

(851mm) 33" (838mm) 32½" (826mm)

Dim B 27" (686mm) 24" (610mm) 29-5/8" (752mm) 28-15/16" (735mm) 28-15/16" (735mm)

Dim C 20-3/4" (527mm) 18-1/4" (464mm) 21-1/8" (536mm) 20-1/4" (514mm) 19-3/4" (502mm)

Installation LVSD2

Bradley • 215-1829 Rev. C; ECN 18-08-010A 7/25/2018 7

Mounting for Standard, ADA and TAS height shown.

Structural Rough-Ins

Points A, B and C require sufficient backing

compliant with local building codes.

Secure bracket to wall using min.

(2) 3/8" anchor bolts to the left of

C/L and min. (2) 3/8" anchor bolts

to the right of C/L. The (2) anchor

bolts to the right of C/L must be

min. 16" apart from the anchor bolts

to the left of C/L. When mounting

is complete, check to ensure the

bracket is level. See Step 1: Bracket

Mounting for more information.

33-1/2"

(851mm)

Rim Height

25-1/2"

(648mm)

24"

(610mm)

20"

(508mm)

36-1/2"

(927mm)

24"

(610mm)

31-1/2"

(800mm)

CODE DESCRIPTION QTY.

A Install (1) 3/8" wall anchor with a minimum pull-out force of 1,000 lbs. per local codes at locations shown 2

Provide structural backing compliant with local building codes.

Install wall anchor with a minimum pull-out force of 100 lbs. per local codes at locations shown

20"

(508mm)

Wall Bracket

RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE

33-1/2" No Adjustment Standard Height, ADA, TAS and CSA

30-1/2" Subtract 3" Juvenile, ADA and TAS

32½" Subtract 1" AODA

33" Subtract 1/2" OBC

28-1/2"

(724mm)

Bottom of

Bracket

WARNING The bracket is not designed to support the bowl. Wall bracket is a

temporary support until bowl is mounted at location "A". Ensure

bowl is completely seated in the wall bracket and securely

fastened to the wall at point A.

LVSD2 Installation

87/25/2018 Bradley • 215-1829 Rev. C; ECN 18-08-010A

Plumbing and Electrical Rough-Ins

Mounting for Standard, ADA and TAS height shown.

CODE DESCRIPTION QTY.

A 1-1/2" NPT Drain, Stub-out 2" from wall, individual waste option 2

H,C 1/2" Nominal (5/8" O.D. Comp.) Hot/Cold supplies, Stub-out 2" from wall 1

E 110V GFI protected electrical outlet (AC faucet and soap only) 2

S Outline of shared soap container (if selected) 1

P Outline of personal soap container (if selected) 2

33-1/2"

(851)

Rim

Height

14" - 16"

(355 - 406)

12" - 13"

(305 - 330)

5-1/2" - 6-1/2"

(139 - 165)

2-1/2" - 3-1/2"

(64 - 89)

4" - 5"

(102 - 127)

20-3/4"

(527)

23" - 24"

(584 - 610)

20" - 23"

(508 - 584)

26" - 27"

(660 - 686)

H C

(mm)

14" - 16"

(355 - 406)

Installation LVSD2

Bradley • 215-1829 Rev. C; ECN 18-08-010A 7/25/2018 9

Bracket Mounting

Typical installation is shown. It may be necessary to repair the wall

after mounting. The fixture may not cover all of the wall modifications.

16"

(406mm)

min.

Install wall bracket to wall

per structural rough-in

dimensions. Check to

ensure the bracket is

level. Example anchor

locations shown.

Mounting height per structural rough-in dimensions.

For ease of drain installation, lay the bowl on its back.

2Drain Assembly

Thread screw into drain

adapter until it becomes

fully engaged.

Thread the standoff onto

the now fully engaged

screw.

BO-Ring

Drain

Adapter

Packing

Washer

#10-24

Screw

#6-32 x 1-1/4"

Screw

Standoff, Hex

SS #6-32 x 1"

Assemble the remaining components as

shown and thread the four screws through

the drain adapter and into the basin inserts.

Ensure the screws compress the drain

adapter evenly onto the basin.

WARNING The bracket is not designed to support the bowl. Wall bracket

is a temporary support until bowl is mounted to wall.

LVSD2 Installation

10 7/25/2018 Bradley • 215-1829 Rev. C; ECN 18-08-010A

Bowl Mounting (to Bracket and Wall)

Strainer and P-Trap

Strainer

Thread the strainer screw

through the strainer and

into the stand off on the

drain adapter.

Position bowl above wall bracket.

Press firmly on the back of the bowl

to seat the bowl flange into the wall

bracket lip. Ensure bowl is level.

Secure the bowl to the wall anchors

using fasteners per the structural

rough-in requirement (supplied by

installer).

Ensure not to overtighten

the strainer screw.

WARNING Ensure bowl is completely seated in

the wall bracket and securely fastened

to the wall at point A.

Faucet Installation

3For ease of drain installation,

lay the bowl on its back.

Install the faucets and optional

soap valves according to the

manufacturer's instructions.

CAUTION Bracket is not intended to support the weight of bowl for an extended period of time.

Be sure to secure the bowl to the wall using appropriate fasteners.

Install supplied p-trap to

drain adapter.

Andere Handbücher für Verge LVSD2

Inhaltsverzeichnis

Andere Bradley Sanitärprodukte Handbücher

Bradley

Bradley Verge LVQ Series Bedienungsanleitung

Bradley

Bradley S19-430EFW Bedienungsanleitung

Bradley

Bradley S19-230T Bedienungsanleitung

Bradley

Bradley Terreon MG Series Produktinformationsblatt

Bradley

Bradley Express Crescent CRS-2/IR Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley S19-460EFW Bedienungsanleitung

Bradley

Bradley EXD-2N Bedienungsanleitung

Bradley

Bradley MG-2/BIR3 Bedienungsanleitung

Bradley

Bradley S19-690 Bedienungsanleitung

Bradley

Bradley S45-1986 Bedienungsanleitung

Bradley

Bradley S19-430EH Bedienungsanleitung

Bradley

Bradley S19-220TSS Bedienungsanleitung

Bradley

Bradley Express SS-2N/BIR3/STD Bedienungsanleitung

Bradley

Bradley Verge LVRD Series Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley Advocate LA Series Bedienungsanleitung

Bradley

Bradley S19-630 Bedienungsanleitung

Bradley

Bradley Terreon Classic WF2500 Series Bedienungsanleitung

Bradley

Bradley S19294 Series Bedienungsanleitung

Bradley

Bradley Frequency FL-2H Bedienungsanleitung

Bradley

Bradley S19-220DCR Bedienungsanleitung

Bradley

Bradley HN200 Bedienungsanleitung

Bradley

Bradley Aerada 900 Series Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema