Brickcom OSD-200A 20xp Datenblatt

2 Megapixel Speed Dome

Network Camera

OSD-200A 20xp

Easy Installation Guide

1

Step 1. Check Package Contents

a. Network Camera

b. M3 Standard Screw (x1)M3 Security Screw (x1)

M5 Standard Screw (x1)

M5 Security Screw (x1)

Security Torx

Lubricant

c. Waterproof Rubber

d. Power

Connector

Alarm I/O

Connector

Audio

Connector

e. Outdoor Mount

Kit

f. Easy Installation

Guide

g. Product CD

h. Warranty Card

English

2

<Bottom View>

Please refer to the illustrations below to

connect power core through the supplied

power adaptor, and set up the audio

according to the Audio pin definition.

<Power Connector>

<Audio Connector>

NOTE: To power up the camera, please plug the AC 24V cable into the camera’s

power connector (Operating Temperature: -40℃-50℃); Or connect the Ethernet

cable to the camera’s Ethernet port and plug the other end of cable into an IEEE

802.3at High Power over Ethernet (PoE plug)switch (Operating Temperature: -7℃

-50℃)

3

<Alarm I/O Connector>

When cabling, please refer to the table below for pin definition of Alarm I/O setting.

Please make sure the alarm connections are properly.

Step 2. HW Installation

1. Apply lubricant to the Dome cover’s water-proof rubber to make the installation

process smoother.

NOTE: The tiny protrusion on the dome cover must align with one of the four holes

on the dome body.

4

2. Attach the Dome cover to the Dome body by gently pressing down on the sides of the

Dome cover with both hands.

NOTE: DO NOT press the cover from the top as this may cause damage to the

Dome body.

3. Screw the Dome cover and body together.

Step 3. Install Camera with Mount Kit.

1. Make a cable entry hole on the wall/ ceiling to insert the cable(s).

2. Attach the waterproof rubber to the selected mount kit.

3. Route the Ethernet and I/O cables through the top holder and join the selected mount

kit with supplied screws and washers. Then adjust the Waterproof Rubber over the

joint.

4. Connect the Ethernet and I/O cables and hook the safety wired to the camera.

5. Attach the camera to the top cover with the supplied screw and washers.

5

Wall Mounting: Pendant Mount (mounting example)

NOTE: Refer to the mounting instruction in the “Speed Dome Mounting Accessories

Installation Guide” for more details.

6

Step 4. Install the EasyConfig Software

Insert the CD into the CD-ROM, and follow the instructions of the Install Shield Wizard to finish

installation.

Step 5. Launch EasyConfig

Launch the EasyConfig software, and click on the camera from the survey list to connect.

7

Step 6. Installation Completed

Click <Live View> to view the live video feed of the network camera.

Enter the default user name (admin) and password (admin) in the prompt request dialogue.

After connecting to the network Speed Dome Camera, the request for installing the ActiveX control

will appear below the URL bar. Right click on the bar, and click “Install Brickcom ActiveX Control..”to

permit ActiveX control installation.

In the pop-up security warning window, click “Install”to start downloading DC Viewer software on the

PC.

Click “Finish”after DC Viewer installation is complete.

Inhaltsverzeichnis

Andere Brickcom Sicherheitskamera Handbücher

Brickcom

Brickcom FB-100Ae Series Datenblatt

Brickcom

Brickcom MD-500Ap Series Datenblatt

Brickcom

Brickcom MD-300Np-A4-Star Datenblatt

Brickcom

Brickcom Bullet Series Gebrauchsanweisung

Brickcom

Brickcom VD-130A V2 Series Bedienungsanleitung

Brickcom

Brickcom OB-130Np Gebrauchsanweisung

Brickcom

Brickcom OB-500Af Series Datenblatt

Brickcom

Brickcom Fixed Box Series Bedienungsanleitung

Brickcom

Brickcom Vandal Dome Series Bedienungsanleitung

Brickcom

Brickcom WFB-100A Bedienungsanleitung

Brickcom

Brickcom Outdoor Bullet V2 Series Datenblatt

Brickcom

Brickcom FB-500A series Bedienungsanleitung

Brickcom

Brickcom MD-100A series Bedienungsanleitung

Brickcom

Brickcom FD-100A Series Bedienungsanleitung

Brickcom

Brickcom FB-100A Series Bedienungsanleitung

Brickcom

Brickcom FB-100A Series Bedienungsanleitung

Brickcom

Brickcom Fixed Dome Series Datenblatt

Brickcom

Brickcom OB-E200Af Gebrauchsanweisung

Brickcom

Brickcom OB-100A Bedienungsanleitung

Brickcom

Brickcom OB-E400AF Datenblatt

Brickcom

Brickcom MD-100Ae Bedienungsanleitung

Brickcom

Brickcom OB-502Ae V5 Series Gebrauchsanweisung

Brickcom

Brickcom Vandal Dome Series Datenblatt

Brickcom

Brickcom MD-500Ap Series Gebrauchsanweisung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung