Bristan EV KIT-EFB C Montageanleitung

Installation Instructions

and User Guide

Evo Riser Rails and Kits

Models Covered:

EV KIT-EFB C, EV KIT-EEFB C H,

EV KIT-EEFB C, EV KIT-EEVK C

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave

them with the user.

Contents

• Important Safety Information 3

• Dimensions (mm) 4-5

• Pack Contents 6

• Installation 7-9

• Operation 9

• Maintenance 10

• Troubleshooting 11

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Contents

Thank you for choosing Bristan, the UK’s leading taps and

showers expert. We have designed these products with your

enjoyment in mind.

To ensure that they work to their full potential, they need to be

ﬁtted correctly. These ﬁtting instructions have been created to

give you all of the information you need and, if you need any

further help, please do not hesitate to give us a call on 0300 026

6273.

Please read these instructions thoroughly and retain for future use.

All products manufactured and supplied by Bristan are safe provided they

are installed, used correctly and receive regular maintenance in accordance

with these instructions.

If you are in any doubt about your ability to install this product safely you

must employ the services of an experienced qualiﬁed plumber.

This product needs to be installed in accordance with, and meet the

requirements of the Water Supply (Water Fittings) Regulations 1999 and

current byelaws. For full Installation Requirements & Notes (IRN) please visit

wras.co.uk/directory.

Before starting any installation please consider the following:

Before drilling into walls, check that there are no hidden electrical

wires, cables or water supply pipes. This can be checked with the aid

of an electronic detector.

If power tools are used do not forget to: - Wear eye protection

- Unplug equipment after use

• Remove all packaging and check the components for damage.

• Do not use if the shower head or hose has been damaged or blocked.

• Do not block the ﬂow of water from the shower head, by placing it

(smothering it) on your hand or any other part of your body or

foreign object.

• Do not crush or kink the shower hose, this could damage the hose and

cause leaks.

• This product must not be modiﬁed in any way as this will

invalidate the guarantee.

If in doubt, contact a registered plumber or your Local Water

Authority or the Secretary of the Institute of Plumbing,

address as follows:-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex,

RM12 6NB, Tel: 01708 472791

Recommended Usage

Domestic Heavy

Commercial

Light

Commercial

Healthcare

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 3

Important Safety Information

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Dimensions (mm)

EV KIT -EFB C EV KIT -EEFB C

EV KIT -EEFB C H EV KIT -EEVK C

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 5

Dimensions (mm)

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Pack Contents

1. Wall Brackets x2

2. Riser Rail x1

3. Slider x1

4. Handset x1

5. Fixings x4

6. Hose x1

7. Shelf *not shown x1

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 7

Installation

1. Mark the position

Position the assembled riser rail

onto the wall, bearing in mind

the highest maximum position

required for the handset. With the

riser rail vertical, mark the position

of the wall brackets onto the wall

surface.

2. Attach wall bracket ﬁxings

Remove the wall brackets from

the rail and then remove the

ﬁxings from the wall brackets.

Position the ﬁxing bracket in the

marked positions against the wall,

ensure they are vertically in line

with each other and mark the

centres of the ﬁxing holes onto

the wall.

Warning: Please check

for any hidden pipes and

cables before drilling holes

in the wall.

Drill suitable holes and insert the

wall plugs. Securely attach the

ﬁxing brackets to the wall using

the screws.

Tip: A piece of

insulation or

masking tape

positioned where

holes are to be

drilled and before

marking out the

exact position for

the ﬁxing holes will

help stop the drill

bit from wandering,

particularly on a

tiled surface.

When working near

a basin, bath or

shower insert plug

or cover waste

to prevent losing

small parts. Take

care not to drop

tools / equipment

into basin, bath

or shower during

installation.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation

3. Insert riser rail

Ensure the rail clamps are in position

and push the riser rail up through

the bottom wall bracket.

Push the shelf and slider down onto

the riser. Ensure the slider it is the

correct way up, as shown opposite.

Push the riser rail up through the

top wall bracket.

4. Tighten rail clamps

Centre the riser rail within the wall

brackets and tighten both clamps

located inside the wall bracket onto

the rail.

5. Fit the riser to the wall

Slide the riser brackets over the

bracket ﬁxings attached to the wall.

Tighten the grub screw on

the underside of both top and

bottom wall brackets using a

2.5mm hexagonal key.

Rail

Clamps

Component Order

Bottom Bracket

Shelf then Slider

Top Bracket

Fit to Wall

6. Connect shower hose

Screw the shower hose (ribbed

end) onto the shower valve outlet

(not supplied), ensuring the rubber

washer is ﬁtted.

7. Connect shower hose to

shower head

Screw the shower hose (conical

end) onto the shower head ensuring

that the rubber washer is ﬁtted.

Place the shower head into the

slider.

Adjusting the Slider

Press the button on the underside

of the slider to move higher or

lower for user height.

To adjust the angle of the shower

head, twist the slider bracket to

the desired position.

EEVK Multi-Function Handset

Jet Combination Spray

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors. 9

Installation

Operation

The multi-function shower head has 3 spray functions, spray, jet and

combination. Simply rotate the spray head one way or the other to the

desired spray pattern.

Push to

Adjust

Height

Twist

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Maintenance

General Cleaning

Bristan products are made from premium materials,

with hand polishing and electroplated ﬁnishes.

Your product should be regularly cleaned with warm

water, a mild pH-neutral liquid soap, and polished

with a soft cloth. Any residues from soap, toothpaste,

shampoos and shower gels can cause blemishes if

not rinsed o straight after use.

Household bleaches and cleaners contain harsh

chemicals and may damage the surface ﬁnish.

Avoid using abrasive cloths, scouring pads, scrub

sponges, steel wool or anything similar.

Some surfaces such as nickel and pewter may be

aected by the dye found in some cloths, so it is

also important to avoid hanging cloths on spouts.

Your Bristan shower head has rub-clean nozzles for

easy cleaning. Simply rub your ﬁngers across the

rubber spray jets regularly and before you turn the

shower on to remove any scale or debris.

Cleaning the Shower Head

The hardness of the water in your area will determine

how often you should clean your shower head.

Build up of scale in particularly hard water areas

combined with constant use means you may need to

clean your shower head once a week. To ensure

continued performance the shower head needs to

be regularly de-scaled.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan TY2 SDIV C Montageanleitung

Bristan

Bristan Manhattan MH SNK C Bedienungsanleitung

Bristan

Bristan QST BAS2 C Bedienungsanleitung

Bristan

Bristan GLD2 BF C (D1) Verdrahtungsschema

Bristan

Bristan Regency Luxury R BSM C Verdrahtungsschema

Bristan

Bristan W BTH PU1 C/G Bedienungsanleitung

Bristan

Bristan W BASIN12 C Bedienungsanleitung

Bristan

Bristan DUL2 SHXARFF C Verdrahtungsschema

Bristan

Bristan Star FH STRD01 C Bedienungsanleitung

Bristan

Bristan Artisan AR SNK C Bedienungsanleitung

Bristan

Bristan IRBS4-CP Montageanleitung

Bristan

Bristan Prism Bedienungsanleitung

Bristan

Bristan Quest Deck Sink Mixer Verdrahtungsschema

Bristan

Bristan CRZ2 SHXDIVCTFF C Verdrahtungsschema

Bristan

Bristan Java Mini J MBAS C Bedienungsanleitung

Bristan

Bristan Pear Verdrahtungsschema

Bristan

Bristan W BASIN04 C Bedienungsanleitung

Bristan

Bristan Descent DSC BAS C Montageanleitung

Bristan

Bristan Z2 TBV 1/2 C Verdrahtungsschema

Bristan

Bristan CART 06734B Original Betriebsanleitung

Bristan

Bristan BL3105 Montageanleitung

Bristan

Bristan Jute JU BASNW C Bedienungsanleitung

Bristan

Bristan EXD BAS C Bedienungsanleitung

Bristan

Bristan Cadet Verdrahtungsschema

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung