Car-Interface CI-RL3-C3D Bedienungsanleitung

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

r.LiNK Video inserter

CI-RL3-C3D

Compatible with

Alfa Romeo vehicles

with Connect Radio and 6.5 inch monitor

or Connect 3D navigation and 8.8 inch monitor

Video-inserter for one rear-view camera and two additional video inputs

Product features

Video-inserter for factory-infotainment systems

CVBS Input for one rear-view camera

2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T2

Tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Activatable parking guide lines for rear-view camera (not available for all vehicles)

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC compatible

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors –video interface

1.4. Settings of the 8 Dip switches (black)

1.4.1. Enabling the interface’s video inputs (dip 2-3)

1.4.2. Rear-view camera setting (dip 5)

1.4.3. Activating the guide lines (dip6)

1.4.4. Monitor selection (Dip 7 and8)

1.5. Settings of the 4 Dip switches (CAN function –red)

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connection to factory head unit and monitor

2.3.1. Connection to the picture signal cable –

2.3.2. Connection to Quadlock - CAN

2.4. Connection of video-sources

2.4.1. Audio insertion

2.4.2. After-market rear-view camera

2.4.2.1. Case 1: Interface receives the reverse gear signal

2.4.2.2. Case 2Interface does not receive the reverse gear signal

2.5. Connecting video-interface and external keypad

2.6. Picture settings and guide lines

3. Interface operation

3.1. By factory infotainment button

3.2. By keypad

4. Specifications

5. FAQ –Trouble Shooting-Interface functions

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

video interface’s place of installation must be free of moisture and away from heat sources.

Before the final installation in the vehicle of the video sources, we recommend a test-run

to ensure the compatibility of vehicle and interface. Due to changes in the production of

the vehicle manufacturer there’s always a possibility of incompatibility.

1.1. Delivery contents

'ahmad@fosp.cn'

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page4

Requirements

Brand

Compatible vehicles

Compatible systems

Alfa Romeo

Giulia (952) since model year 2016

Stelvio (949) since model year 2017

Connect Radio with 6.5 inch monitor and

Connect 3D navigation with 8.8 inch monitor

Limitations

Video only The interface inserts ONLY video signals into the infotainment. For inserting

Audio signals either the possibly existing factory audio-AUX-input or a FM-

modulator can be used. If 2 audio sources shall be connected to the

infotainment, an additional electronic is necessary to switch them.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera is

only possible while the reverse gear is engaged. To delay the switch-back an

additional electronic part is required.

Video input signal Only NTSC compatible.

Guide lines If the interface does not receive the required information from the vehicle CAN-

bus, the guide-lines will not be supported.

1.2. Checking the compatibility of vehicle and accessories

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page5

1.3. Boxes and connectors –video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

1.4. Settings of the 8 Dip switches (black)

Some settings have to be selected by the dip-switches of the

video interface.

Dip position down is ON and position up is OFF.

See the following chapters for detailed information.

Dip

Function

ON (down)

OFF (up)

No function

set to OFF

CVBS Video 1-input

enabled

disabled

CVBS Video 2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

Guide lines

guide lines enabled

guide lines disabled

Monitor-specific

adjustments

Try all 4 possible combinations of Dips 7 and 8 to receive

the best picture (quality and size)

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page6

1.4.1. Enabling the interface’s video inputs (dip 2-3)

Only by dip switches enabled video inputs can be accessed by switching through the

interface’s video sources. It is recommended to enable only the required inputs. Disabled

inputs will be skipped while switching through the video interfaces inputs.

Note: Dip 1 and 4 are out of function and have to be set to OFF!

1.4.2. Rear-view camera setting (dip5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera or factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input while the reverse gear is

engaged.

1.4.3. Activating the guide lines (dip6)

If set to ON, the guide-lines will be shown on the display.

If set to OFF, the guide lines won’t be visible on the display.

Note:If there is no communication between interface and the vehicle`s CAN-bus (several

vehicles aren’t compatible), the reverse gear guide-lines can`t be shown during the vehicle’s

operation, even if they once appear after having switched the system to powerless!

1.4.4. Monitor selection (dip7 and 8)

Dips 7-8 customize the monitor-specific video settings which sometimes even vary within

head units of the same version, caused by different monitor specifications. Try all possible

combinations of dip7 and 8 while a working video source is connected to the chosen input of

the interface. One of the 4 combinations will show the best picture size and quality (some

may give no picture). It is possible to first hot plug through the dip combinations. If there is

no change of picture visible after trying all 4 options, retry and disconnect the 6pin plug at

the interface box between every change of the dip setting.

Empirical value:

Size of monitor

Dip 7

Dip8

8.8inch monitor

OFF

6.5inch monitor

OFF

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page7

1.5. Settings of the 4 Dip switches (CAN functions –red)

Dip position down is ON and position up is OFF.

Fahrzeug/Navigation

Dip 1

Dip 2

Dip 3

Dip 4

Alfa Romeo vehicles

OFF

Note: If, with dip switch-1 setting „ON“ the source switching by infotainment button

doesn‘t succeed and further the external keypad doesn’t work either, the dip switch

setting of dip-1 has to be changed to „OFF“.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

Before a final installation, we recommend a test-run to ensure the compatibility of the

vehicle and the interface. Due to changes in the production of the vehicle manufacturer

there’s always a possibility of incompatibility.

2.1. Place of installation

The interface is supposed to be installed at a suitable location behind the vehicle`s head-

unit.

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page8

2.2. Connection schema

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page9

2.3. Connections to factory head-unit and monitor

Remove the factory head unit and monitor

2.3.1. Connection to the picture signal cable

Disconnect the factory picture signal cable’s purple coloured female HSD+2 connector at the

rear-side of the head unit and connect it to the purple coloured HSD+2 connector

„TO LCD“ of the video interface .

Connect the not-angled purple coloured female HSD+2 connector of the enclosed picture

signal cable to the previously become free purple coloured male HSD+2 connector of the

video interface.

Connect the angled female purple coloured HSD+2 connector opposite the picture signal

cable to the purple coloured male HSD+2 connector „HU IN“of the video interface.

Note: The colours of the HSD+2 connectors at monitor and head unit may vary.

Version 01.02.2019 HW:CAM (V98) / (V20) CI-RL3-C3D

Page10

2.3.2. Connection to Quadlock - CAN

Connect the female 10pin connector of the 10pin Power / CAN cable to the 10pin connector

of the video interface.

Remove the female 40pin Quadlock connector of the vehicle harness from the rear-side of

the head-unit and connect it to the male 40pin Quadlock connector of the Power / CAN

cable.

Connect the opposite female Quadlock connector of the Power / CAN cable to the previously

become free male Quadlock connector at the rear-side of the head unit.

Inhaltsverzeichnis

Andere Car-Interface Autozubehör Handbücher

Car-Interface

Car-Interface CI-RL4-UCON8-LV Bedienungsanleitung

Car-Interface

Car-Interface CI-VL2-CCC Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-NAC12 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL5-MIB-STD2 Bedienungsanleitung

Car-Interface

Car-Interface CI-V5-CIC-F-PNP Bedienungsanleitung

Car-Interface

Car-Interface CI-VL2-124SPY Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-R40-E Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-NTG3 Bedienungsanleitung

Car-Interface

Car-Interface v.LiNK CI-VL2-CIC-F Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-NAC08 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-C25 Bedienungsanleitung

Car-Interface

Car-Interface CI-CARPLAY-CIC Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-LR16-8 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-A40 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL2-SC14 Bedienungsanleitung

Car-Interface

Car-Interface CI-C1-RNSE Bedienungsanleitung

Car-Interface

Car-Interface CI-RL-PCM3-TF Bedienungsanleitung

Car-Interface

Car-Interface v.LOGiC CI-V5-CCC-PNP Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-MIB-TT-LA Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-MIB92 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-C20 Bedienungsanleitung

Car-Interface

Car-Interface CI-VL2-MIB-3 Bedienungsanleitung

Car-Interface

Car-Interface v.LiNK CI-VL2-LR14-OPS Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung