Car-Interface CI-RL4-R40 Bedienungsanleitung

Version 27.07.2021 HW: CAM(V100)/(V32) CI-RL4-R40

Video-inserter

CI-RL4-R40

Compatible with

Opel vehicles with R4.0 IntelliLink system

and 7inch monitor with DIN-cage attached

Video-inserter for front- and rear-view camera

and two additional video inputs

Product features

Video-inserter for factory infotainment systems

1 CVBS Input for rear-view camera

1 CVBS Input for front camera

2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T2

Tuner)

Automatic switching to rear-view camera input on engagement of reverse gear

Automatic front camera switching after reverse gear for 10 seconds

Activatable parking guide lines for the rear-view camera (not available on all

vehicles)

Video-in-motion in drive mode (ONLY for connected video-sources)

Video-inputs PAL and NTSC compatible

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Connection Video-Interface

1.4. Settings of the 8 Dip switches (black)

1.4.1. Adjustment –power supply output (dip 1)

1.4.2. Enabling the interface’s video inputs (dip 2-3)

1.4.3. Rear-view camera setting (dip 5)

1.4.4. Activating –front camera back switching (dip 6)

1.5. Settings of the 4 Dip switches (CAN function –red)

2. Installation

2.1. Place of installation

2.1.1. Place of installation –video interface

2.1.2. Place of installation –daughter PCB

2.2. Connection schema

2.3. Connection to the head-unit

2.3.1. Installation of the Exchange –retaining plate and the daughter PCB

2.3.2. Connecting ribbon cables

2.3.2.1. Ribbon cable –66pin

2.3.2.2. Warning notes, concerning the installation of ribbon cables

2.4. Connection from monitor to the video interface

2.5. Connection to the head-unit –Power / CAN

2.6. Power supply output

2.7. Connection - video sources

2.7.1. Audio-insertion

2.7.2. After-market front camera

2.7.3. After-market rear-view camera

2.7.3.1. Case 1: Video-interface receives the reverse gear signal

2.7.3.2. Case 2: Video interface does not receive the reverse gear signal

2.8. Connecting video-interface and external keypad

2.9. Picture settings and guide lines

3. Interface operation

3.1. By CALL OFF button

3.2. By keypad

4. Specifications

5. FAQ –Trouble shooting

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page4

Compatibility

Limitations

Video only The interface inserts ONLY video signals into the infotainment.

For audio inserting, use the possibly existing factory audio-AUX-input

or a FM-modulator. If 2 AV-sources shall be connected to the

infotainment, for audio switching an additional electronic part is

required.

Factory rear-view camera Automatic switching-back from inserted video to factory rear-view

camera is only possible while the reverse gear is engaged. To delay

the switch-back, an additional electronic part is required.

After market front camera The front camera will automatically be switched for 10 seconds after

disengaging the reverse gear. A manually front camera switching is

possible by external keypad.

Guide lines Displayed guidelines are not available in all vehicles.

1.2. Checking the compatibility of vehicle and accessories

1.3. Connection Video-Interface

The video-interface converts the connected after-market sources video signals into an digital

RGB signal which is inserted in the factory monitor using separate trigger options and it

reads vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video

interface.

Brand

Compatible vehicles

Infotainment systems

Opel

Adam

Corsa E until 06/2019

Crossland X since model year 2017 (no GM-LAN)

Grandland X since model year 2017 (no GM-LAN)

Mokka X model year 2016-2020

Zafira C since model year 2017

R4.0 IntelliLink - 7" monitor

with DIN-cage attached

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page5

1.4. Settings of the 8 Dip switches (black)

Some settings have to be selected by the dip-switches on the

video interface.

Dip position down = ON and position up = OFF.

*The front camera will automatically be switched for 10 seconds after disengaging the

reverse gear.

See the following chapters for detailed information.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Dip

Function

ON (down)

OFF (up)

Power supply output

(red wire)

+12V (max. 3A) when reverse

gear is engaged incl. 10

seconds delay and +12V by

manual switching to front

camera by keypad

+12V (max. 3A) ACC

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

Frontcam

back-switching

for 10 seconds

Enabled*

disabled

No function

set to OFF

No function

set to OFF

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page6

1.4.1. Adjustment –power supply output (dip 1)

If set to ON, the video interfaces’ red wire will supply +12V (max 3A) with engaging the

reverse gear and additionally 10 more seconds delay for the time of the front camera’s back-

switching after the reverse gear has been disengaged. Furthermore, the red wire’s power

supply for the front cam becomes active with manually front camera switching (short press

of the external keypad).

If set to OFF, the video interfaces’ red wire will supply permanent +12V ACC (max 3A).

Description of the power supply output: see chapter “Power supply output”.

1.4.2. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It`s recommended to enable only the required inputs for the disabled will be

skipped when switching through the video-interfaces inputs.

1.4.3. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory LVDS picture while the reverse gear is engaged

to display factory rear-view camera or factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input “Camera-IN” while the

reverse gear is engaged.

1.4.4. Activating –front camera back-switching (dip 6)

If set to ON, the interface switches for 10 seconds from the rear-view camera to the front

camera input after having disengaged the reverse gear. In addition, a manual switch-over to

the front camera input is possible via keypad (short press) from any image mode.

(Attend to correct adjustment of the power supply output (dip1)!

Note: Dip 4, 7 and 8 are out of function and have to be set to OFF.

1.5. Settings of the 4 Dip switches (CAN function - red)

Dip position down is ON and position up is OFF.

Navigation / Sy5tem

Dip 1

Dip 2

Dip 3

Dip 4

R4.0 IntelliLink systems

OFF

Set all 4 dips to OFF.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page7

2. Installation

Switch off the ignition and disconnect the vehicle’s battery! The interface needs a

permanent 12V source. If -according to factory rules- a disconnection of the battery has to

be avoided, it should be sufficient to use the vehicle’s sleep-mode. In case, the sleep-mode

doesn’t succeed, the battery has to be disconnected with a resistor lead.

The Interface needs a permanent power supply! If power isn’t directly taken from the

battery, the connection’s power has to be checked for being start-up proven and

permanent.

2.1. Place of installation

2.1.1. Place of installation –video-interface

The video-interface is performed to be installed at the backside of the head-unit.

2.1.2. Place of installation –daughter PCB

The daughter PCB is performed to be installed with an exchange housing plate behind the

head unit’s monitor panel.

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page8

2.2. Connection schema

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page9

2.3. Connections to the head-unit

2.3.1. Installation of the Exchange –retaining plate and the daughter PCB

Remove the head-unit and further remove the

original housing cover plate, which is fixed to the

head-unit housing by 5 Torx screws (T9).

Turn out the 4 screws of the monitor retaining

plate, after carefully unklipping the 66pin and

the 9pin ribbon cables.

Note: The connected ribbon cables have to be

handled with care to avoid each damage of the

sensitive electrical inducters (Refer also to

chapter “Connecting the ribbon cables”)

Remove the Original monitor retaining plate and replace it with the exchange

retaining-plate by using the original screws.

Version 03.08.2020 HW: CAM(V100)/(V32) CI-RL4-R40

Page10

After connecting the ribbon cables, the

daughter PCB has to be fixed with its

rearside at the exchange retaining plate

by using the enclosed 2 shorter screws.

Previous ribbon cable connection:

Read the following instructions!

2.3.2. Connecting the ribbon cables

2.3.2.1. Ribbon cable –66pin

Connect the daughter PCB’s pre-assembeled 66pin ribbon cable „IN PCB“ to the previously

become free ribbon cable base of the monitor mainboard (heed the following warning

notes!).

Inhaltsverzeichnis

Andere Car-Interface Autozubehör Handbücher

Car-Interface

Car-Interface CI-VL2-124SPY Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-C25 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free TF-NTG1 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-C20 Bedienungsanleitung

Car-Interface

Car-Interface v.LINK VL2-MIB-3 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL-PCM3-TF Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-PCM30 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-LR16-8 Bedienungsanleitung

Car-Interface

Car-Interface RL4-MM-NP Bedienungsanleitung

Car-Interface

Car-Interface CI-UCON5-JEEP Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-MIB-TT-LA Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-CIC Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-UCON12 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-C3D Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-LR17 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL2-MTC Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-UCON22 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-SY3-R5 Bedienungsanleitung

Car-Interface

Car-Interface CI-DAB-CAN1-SK Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-NAC12 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-NTG3 Bedienungsanleitung

Car-Interface

Car-Interface CI-VL7-SY2 Bedienungsanleitung

Car-Interface

Car-Interface CI-UCON7-JEEP Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-MBN6 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung