Car-Interface CI-RL4-MIB100 Bedienungsanleitung

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

r.LiNK Video inserter

CI-RL4-MIB100

Compatible with

VW vehicles with Discover Media/Pro MIB3 infotainment

and 10inch monitor

Skoda vehicles with MIB3 Bolero/Columbus infotainment

and 10inch monitor

Seat/Cupra vehicles with MIB3 Media System Plus

infotainment and 10 or 12inch monitor

Video-inserter for front- and rear-view camera

and two more video inputs

Product features

Video-inserter for factory-infotainment systems

1 CVBS Input for rear-view camera

1 CVBS Input for front camera

2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T Tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Automatic front camera switching after reverse gear for 10,15 or 20 seconds

(adjustable)

Activatable parking guide lines for rear-view camera (not available for all vehicles)

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC and PAL compatible

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors –video interface

1.4. Settings - 8 Dip switches (black)

1.4.1. Activating the front camera (dip 1)

1.4.2. Enabling the interface’s video inputs (dip 2-3)

1.4.3. Rear-view camera setting (dip 5)

1.4.4. Activation –guide-lines (dip 6)

1.4.5. Activation –factory PDC (dip 7)

1.5. Settings - 4 Dip switches (CAN function –red)

1.6. Settings - 2 Dip switches (Selection head-unit –black)

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connection - factory head unit

2.3.1. Connection - picture signal cable

2.3.2. Connection - Quadlock - CAN

2.3.3. Connection - Power

2.3.4. Analog power supply

2.4. Power supply output for

2.5. Connection - video-sources

2.5.1. Audio insertion

2.5.2. After-market front camera

2.5.3. After-market rear-view camera

2.5.3.1. Case 1: Interface receives the reverse gear signal

2.5.3.2. Case 2Interface does not receive the reverse gear signal

2.6. Connection - video-interface and external keypad

2.7. Picture settings and guide lines

3. Interface operation

3.1. By factory infotainment button

3.2. By keypad

4. Specifications

5. FAQ –Trouble Shooting-Interface functions

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

video interface’s place of installation must be free of moisture and away from heat sources.

Before the final installation in the vehicle of the video sources, we recommend a test-run

to ensure the compatibility of vehicle and interface. Due to changes in the production of

the vehicle manufacturer there’s always a possibility of incompatibility.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page4

Requirements

Brand

Compatible vehicles

Infotainment

Seat/Cupra

Formentor since 09/2020.

Leon 4 since 01/2020

MIB3 Media System Plus infotainment with 10 or 12inch

monitor

Skoda

Octavia 4 (NX) since 07/2019

MIB3 Bolero/Columbus infotainment with 10inch

monitor

Golf 8 (CD) since 12/2019

Caddy5 (SB) since 11/2020

ID.3 (E11) since 09/2020

ID.4 (E21) since 12/2020

Discover Media/Pro MIB3 infotainment with 10inch

monitor

Limitations

Video only The interface inserts ONLY video signals into the infotainment. For

inserting Audio signals either the possibly existing factory audio-AUX-

input or a FM-modulator can be used. If 2 audio sources shall be

connected to the infotainment, an additional electronic is necessary to

switch them.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view

camera is only possible while the reverse gear is engaged. To delay the

switch-back an additional electronic part is required.

After market front camera The front camera will automatically be switched for 10, 15 or 20

seconds (adjustable) after disengaging the reverse gear. A manually

front camera switching is possible by external keypad.

Guidelines and PDC Displayed guidelines and PDC are not available in all vehicles.

1.2. Checking the compatibility of vehicle and accessories

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page5

1.3. Boxes and connectors –video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page6

1.4. Settings - 8 Dip switches (black)

Some settings have to be selected by the dip-switches on the

video interface. Dip position down is ON and position up is OFF.

*The front camera will automatically be switched for 10, 15 or 20 seconds after disengaging

the reverse gear (according to the menu adjustments).

After each Dip-switch-change a power-reset of the Video interface has to be performed!

See the following chapters for detailed information.

Dip

Function

ON (down)

OFF (up)

Front camera

enabled*

disabled

Power supply

output

(red wire)

+12V (max. 3A) when reverse

gear is engaged incl. 10, 15 or 20

seconds delay and +12V by

manual switching to front camera

by keypad

+12V (max. 3A) ACC

Video 1-input

enabled

disabled

Video 2-input

enabled

disabled

No function

set to OFF

Rear-view cam

type

after-market

factory or none

Guide-lines

enabled

disabled

Factory PDC

enabled

disabled

No function

set to OFF

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page7

1.4.1. Activating the front camera (dip 1)

If set to ON, the interface switches for 10, 15 or 20 seconds from the rear-view camera to

the front camera input after having disengaged the reverse gear, depending on the menu

adjustments. In addition, a manual switch-over to the front camera input is possible via

keypad (short press) from any image mode.

Description of the power supply output: see chapter “Power supply output”.

1.4.2. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed by switching through the interface’s video

sources. It is recommended to enable only the required inputs. So the disabled inputs will be

skipped while switching through the video interfaces inputs.

1.4.3. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera or factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input while the reverse gear is

engaged.

1.4.4. Activating the guide lines (dip6)

If set to ON, the guide-lines will be shown on the display.

If set to OFF, the guide lines won’t be visible on the display.

Note: If there is no communication between interface and the vehicle`s CAN-bus (several

vehicles aren’t compatible), the reverse gear guide-lines can`t be shown during the vehicle’s

operation, even if they once appear after having switched the system to powerless!

1.4.5. Activation of the factory PDC display (Dip 7)

Dip 7 is used to switch between image formats of front and rear camera and to display the

factory PDC (if available) as „picture in picture“ in combination with the camera image.

For a detailed description, see chapter "Switching the Camera Image Formats and Factory

PDC Display ".

Dip switches 4 and 8 are out of function and have to be set to OFF.

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page8

1.5. Settings of the 4 Dip switches (CAN functions –red)

The 4 dip-switches of the video are used to select the head unit and the

vehicle.

Dip position down is ON and position up is OFF.

Set all dip switches to off

Vehicle/Navigation

Dip 1

Dip 2

Dip 3

Dip 4

All vehicles

OFF

After each Dip-switch-change a power-reset of the video interface has to be performed!

1.6. Settings of the 2 Dip switches (selection head unit - black)

Attention: Dip position up is ON and position down is OFF

(vice versa to the black 8 dips and the red 2 dips).

The 2 dip-switches on the upper side of the interface box are used to select the head unit.

If no image is displayed, switch both dip-switches PARALLEL to the oposite position.

According to the diagram below, a diagonal dip-switch position has to be avoided under any

circumstances!

Manufacturer head unit

Dip 1

Dip 2

Setting 1

OFF ↓

Setting 2

ON ↑

After each Dip-switch-change a power-reset of the video interface has to be performed!

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page9

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

2.1. Place of installation

The interface is supposed to be installed at a suitable location behind the vehicle`s head-

unit.

Version 20.04.2021 HW: CAM(V100)/(V20) CI-RL4-MIB100

Page10

2.2. Connection schema

Inhaltsverzeichnis

Andere Car-Interface Autozubehör Handbücher

Car-Interface

Car-Interface v.LINK VL2-MIB-3 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL2-SC14 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-FSYNC54 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL-PCM3-TF Bedienungsanleitung

Car-Interface

Car-Interface CI-CARPLAY-CIC Bedienungsanleitung

Car-Interface

Car-Interface c.LOGiC lite CI-C1-CCC Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-UCON8-LV Bedienungsanleitung

Car-Interface

Car-Interface v.LOGiC V5-CIC-F-PNP Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-ELINK Bedienungsanleitung

Car-Interface

Car-Interface v.LiNK CI-VL2-LR14-OPS Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-UCON22 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-C3D Bedienungsanleitung

Car-Interface

Car-Interface r.LiNK CI-RL2-N900 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-NAC08 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free Bedienungsanleitung

Car-Interface

Car-Interface CI-RL3-LR17 Bedienungsanleitung

Car-Interface

Car-Interface TV-Free CI-TF-PCM21 Bedienungsanleitung

Car-Interface

Car-Interface CI-AUX-110 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL5-MIB-STD2 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-MZD88 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-LR17 Bedienungsanleitung

Car-Interface

Car-Interface CI-RL4-MIB92 Bedienungsanleitung

Car-Interface

Car-Interface c.LOGiC CI-C2-MK-CD Bedienungsanleitung

Car-Interface

Car-Interface v.LiNK CI-VL2-PC-HSD Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung