CB2 MINI CHILL Bedienungsanleitung

Made in Vietnam - r03 Page 1 of 6

mini chill MEDIA CONSOLE

hardware

components

tools required

Thank you for purchasing the Mini Chill Media Console.

This page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

NOTE: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387

for replacements.

(We recommend the use of hand tools instead of power tools)

14 - cam

screws

1 - top

panel

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

1 - bottom

panel

1 - back panel

1 - partition

1 - drawer

back–

2 - side panels

(1 left, 1 right)

1 - drawer

bottom

1 - drawer

front

2 - drawer

sides

(1 left, 1 right)

22 - wood

dowels

14 - cams 4 - bolts

12 - screws

4 - spring

washers

phillips head screwdriver

4 - flat

washers

6 - cam

covers

1 - middle

panel

1 - apron

1 - drawer

bottom rail

4 - small

screws

4 - large

screws

2 - wall

straps

4 - mounting

brackets

4 - plastic

anchors

mounting hardware

A. Insert 4 cams into middle panel as shown. Make

sure arrows on each cam point toward nearest edge

with holes.

B. Insert 4 cam screws, 6wood dowels and 2

cams into left and right side panels as shown.

Secure, but do not over tighten, cam screws with a

phillips head screwdriver.

mini chill MEDIA CONSOLE

Made in Vietnam - r03 Page 2 of 6

middle

panel

top panel

Fit dowels of apron into corresponding holes of

bottom panel as shown. Secure bottom panel with

2 bolts, 2 spring washers, and 2 flat washers,

using a phillips head screwdriver. Do not over

tighten the bolts.

A. Insert 6 wood dowels and 6 cam screws into

top panel as shown.

B. Insert 4 cams into bottom panel as shown.

NOTE: Make sure arrows

on each cam point toward

nearest edge with holes

left and right

side panels

A. Insert 2 wood dowels and 2 cams into partition

as shown.

B. Insert 2 wood dowels into apron as shown.

partition

NOTE: Do not over

tighten the cam

screws

NOTE: Do not over

tighten the bolts

bottom

panel

apron

bottom

panel

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

mini chill MEDIA CONSOLE

Made in Vietnam - r03 Page 3 of 6

Fit dowels of right side panel into corresponding

holes of assembly and as shown. Turn cams

clockwise with a screwdriver, until each cam

securely engages each cam screw.

Fit back panel into grooves of assembly as shown.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Fit dowels of left side panel into corresponding

holes of assembly as shown. Secure cams.

Fit dowels of partition into corresponding holes of

middle panel as shown. Secure middle panels

with 2 bolts, 2 spring washers, and 2 flat

washers.

partition

middle

panel

right side

panel

back

panel

left side

panel

NOTE: Make sure

groove of middle

panel is positioned

down during assembly

as shown

mini chill MEDIA CONSOLE

Made in Vietnam - r03 Page 4 of 6

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

A. Attach drawer left side to drawer front with 2

screws as shown. Secure screws with a

screwdriver.

B. Slide drawer bottom into grooves of drawer

assembly as shown.

drawer

front drawer

left side

NOTE: Do not over

tighten the screws

drawer

bottom

A. With the assistance of another adult, carefully

position assembled unit upright. Fit dowels of top

panel into corresponding holes of assembled unit.

Secure all cams.

B. At this point, cover all exposed cams with cam

covers.

top

panel

A. Attach drawer back to drawer left side with

2 screws as shown.

B. Attach drawer right side to drawer assembly

with 4 screws as shown.

Adrawer

back

drawer

right side

Position drawer assembly upside down and

attach drawer bottom rail with 4 screws.

drawer

bottom rail

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer. It is

recommended to use coasters to protect surface from heat

and water.

weight limitations

Conventional TV: Top holds 360 lbs evenly distributed

Flat Screen TV: Top holds 100lbs evenly distributed

Other supporting surfaces: Holds 60lbs evenly distributed

Drawer: 40lbs weight capacity

mini chill MEDIA CONSOLE

Made in Vietnam - r03 Page 5 of 6

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

With assistance of another adult, insert glides of drawer assembly into

corresponding glides of case assembly. Keeping the drawer level, carefully push

the drawer until it is all the way in the case and glides are securely engaged.

Assembly is now complete.

NOTE: Make sure glides are

pulled out of the case, and

ball bearings are at the front of

the extended glides

NOTE: Make sure to

keep drawer level so

as not to damage glides

during assembly

mini chill MEDIA CONSOLE

Made in Vietnam - r03 Page 6 of 6

NOTE: If you are unsure about your wall type or what mounting method you should use,

consult a qualified professional or your local hardware store.

For added safety and stability, it is recommended that the wall mounting hardware be installed. For

safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,

concrete, etc.). Mount to wood studs whenever possible.

A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below each

mounting bracket on the back of the unit.

C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly

smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is

flush with the wall.

D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting

bracket and into the wall anchor in the wall.

E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall

brackets.

F) Lace one end of each wall strap through corresponding brackets, and into the other end of the

strap.

G) Pull the straps tightly until secure.

Wall mounting assembly is now complete.

wall mounting assembly

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung