CB2 FUEL Bedienungsanleitung

4 - large

screws

Made in Vietnam - r06 Page 1 of 5

fuel CREDENZA

assembly hardware

mounting hardware

components

tools required

Thank you for purchasing the Fuel Credenza.This page

lists all the contents included in the box. Please take the

time

to identify the hardware as well as the individual

components

to this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Missing hardware? Please call 800.606.6387 for replacements.

(We recommend the use of hand tools instead of power tools)

1 - top panel 1 - bottom panel 1 - back panel

1 - right side panel1 - left side panel

2 - doors

1 - partition

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

phillips head screwdriver

12 - wood

dowels

6 - cam

screws

8 - flat

washers

6 - cams

12 - large

bolts

24 - small

screws

2 - wall

straps

4 - mounting

brackets

4 - plastic

anchors

8 - spring

washers

8 - small

bolts

4 - feet

(2A, 2B)

1 - support

foot

4 - hinges 8 - shelf

supports

4 - small

screws

2 - adjustable

shelves

fuel CREDENZA

Made in Vietnam - r06 Page 2 of 5

A. Insert 4 wood dowels and 2 cams into left

and right side panels as shown. Make sure

arrows on each cam points toward nearest edge

with holes.

B. Insert 4 wood dowels and 2 cams into

partition as shown.

Insert 6 cam screws into top panel as shown.

Secure, but do not over tighten, screws using a

phillips head screwdriver.

Slide back panel into corresponding grooves of

left/right side panel and top panel as shown.

Fit dowels of left/right side panels and partition

into corresponding holes of top panel as shown.

Using a screwdriver, turn each cam clockwise

until it securely engages each cam screw.

partition

NOTE: Make sure arrows

on each cam points toward

nearest edge with holes

left and right

side panels

top

panel

right side

panel

top panel

left side

panel

partition

back

panel

NOTE: Do not over

tighten the cam screws

NOTE: Make sure grooves

of side and top panels are

assembled on the same side

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

NOTE: Make sure

arrow label on partition

points toward the front

during assembly

fuel CREDENZA

Made in Vietnam - r06 Page 3 of 5

A. Attach 4 feet (2A, 2B) to bottom panel with 3

large bolts per foot as shown, using a screwdriver.

B. Attach 1 support foot to bottom panel with 2

small bolts, 2 spring washers and 2 flat washers.

A. With the assistance of another adult, position

unit upright as shown. Insert 8 shelf supports at

desired shelf heights.

B. Place 2 adjustable shelves into assembled

unit. Make sure shelves are securely supported by

each shelf support.

Fit dowels of left/right side panels and partition

into corresponding holes of bottom panel. Secure

bottom panel to left/ride side panels and

partition with 6 small bolts, 6 spring washers

and 6 flat washers, using a phillips head

screwdriver. Do not over tighten the bolts.

NOTE: Do not over

tighten the bolts

NOTE: Do not over

tighten the screws

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

adjustable

shelf

foot A

bottom panel

NOTE: Make sure groove of

bottom panel is assembled

towards back panel

support

foot

Fit 2 hinges into corresponding holes of 2 left and

right doors as shown. Secure each hinge with 2

small screws, using a screwdriver.

hinge

left and right

doors

foot A

foot B

fuel CREDENZA

Made in Vietnam - r06 Page 4 of 5

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

hinge adjustment

If the doors do not appear square or aligned, loosen or

tighten the appropriate screws on each case hinge as

illustrated.

2) Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw Aand secure screw Bwith

a 1/4 turn clockwise.

3) Height adjustment:

Loosen screw C, adjust

door height and re-

tighten screw C.

1) Side to side adjustment:

Loosen screw A, adjust gap

with screw Band re-tighten

screw A.

left door

front

right door

front

A. Attach hinges of left and right door to left and

right side panels as shown. Secure each hinge

with 4 small screws.

B. Secure the set screws with a screwdriver as

shown. Refer to Hinge Adjustment diagram for

adjusting the alignment of the door hinges.

Assembly is now complete.

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do

not use abrasive cleaners. Do not use furniture wax

or polish as the unit is finished with a protective

clear lacquer. It is recommended to use coasters to

protect surface from heat and water.

weight limitations

This credenza is rated to support 50 lbs, evenly

distributed.

fuel CREDENZA

Made in Vietnam - r06 Page 5 of 5

For added safety and stability, it is recommended that the wall mounting hardware be installed. For

safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,

concrete, etc.). Mount to wood studs whenever possible.

A) Attach mounting bracket to top of unit using 2 small screws.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below the

mounting bracket mounted to the back of the unit.

C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly

smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is

flush with the wall.

D) Attach the mounting bracket to the wall by inserting 2 large screws through the mounting

bracket and into the wall anchor in the wall.

E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.

F) Lace one end of the wall strap through both brackets, and into the other end of the strap.

G) Pull the strap tightly until secure.

Repeat step A-G for remaining wall mounting assembly.

Wall mounting assembly is now complete.

NOTE:

If you are unsure about your wall type or what

mounting method you should use, consult a

qualified professional or your local hardware store.

wall mounting assembly

small

screw

mounting

bracket

plastic

anchor

large

screw

wall

strap

mounting

bracket

WALL

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Inhaltsverzeichnis

Andere CB2 Inneneinrichtung Handbücher

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung