Clarke ZX-R Pro Series Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS0113

ONE HOUR FAST CHARGER

MODEL NO: BCH20

PART NO: 6487050

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE One Hour Fast Charger, used to charge

the Clarke 20V Lithium-Ion Battery (part number: 6487050)

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended. Faulty goods should be returned to their place of purchase, no

product can be returned to us without prior permission. This guarantee does

not effect your statutory rights.

SPECIFICATIONS

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as

waste. All tools, accessories and packaging should be sorted,

taken to a recycling centre and disposed of in a manner which is

compatible with the environment.

Voltage 230 - 240 VAC (50Hz)

Input power: 55 W

Output Voltage 20 V

Operating Temperature Range 0 to 45 oC

Charging Time 60 minutes

Weight 0.53 kg

Dimensions (D x W x H) 160 x 114 x 68 mm

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

IMPORTANT SAFETY INSTRUCTIONS FOR ALL

BATTERY CHARGERS

SAVE THESE INSTRUCTIONS:

This manual contains important safety and operating instructions for the

BCH20 battery charger.

• Before using charger, read all instructions and cautionary markings

on charger, battery pack, and product using battery pack.

NOTE: Under certain conditions, with the charger plugged in to the

power supply, the charger can be shorted by foreign material.

Foreign materials of a conductive nature should be kept away

from charger cavities. Always unplug the charger from the power

supply when there is no battery pack attached. Unplug charger

before attempting to clean.

• These chargers are intended to charge the Clarke 20V Lithium-Ion

Battery (part number: 6487050). Any other uses may result in risk of

fire, electric shock or electrocution.

• Do not expose charger to rain or snow.

• Pull by plug rather than cord when disconnecting charger. This will

reduce risk of damage to electric plug and cord.

• Make sure that cord is located so that it will not be stepped on,

tripped over, or otherwise subjected to damage or stress.

• Do not use an extension cord unless it is absolutely necessary. Use of

improper extension cord could result in risk of fire,electric shock, or

electrocution

WARNING: SHOCK HAZARD. DO NOT ALLOW ANY LIQUID TO GET INSIDE

CHARGER. ELECTRIC SHOCK MAY RESULT.

CAUTION: BURN HAZARD. TO REDUCE THE RISK OF INJURY, CHARGE

ONLY CLARKE 20V LITHIUM-ION BATTERIES OTHER TYPES OF BATTERIES

MAY BURST CAUSING PERSONAL INJURY AND DAMAGE.

CAUTION: CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO

NOT PLAY WITH THE APPLIANCE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

• Do not place any object on top of charger or place the charger on

a soft surface that might block the ventilation slots and result in

excessive internal heat. Place the charger in a position away from

any heat source. The charger is ventilated through slots in the top

and the bottom of the housing.

• Do not operate charger with damaged cord or plug — have them

replaced immediately.

• Do not disassemble charger; take it to an authorised service centre

when service or repair is required. Incorrect reassembly may result in

a risk of electric shock, electrocution or fire.

• In case of damaged power supply cord the supply cord must be

replaced immediately by the manufacturer, its service agent or

similar qualified person to prevent any hazard.

• Disconnect the charger from the outlet before attempting any

cleaning. This will reduce the risk of electric shock. Removing the

battery pack will not reduce this risk.

• The charger is designed to operate on standard 230V household

electrical power. Do not attempt to use it on any other voltage.

SAFETY SYMBOLS

Read instruction

manual before use

Indoor Use Only

Class II Double

Insulated

Thermal Fuse Fitted

CE Mark Isolation Transformer

Weee Symbol Do not submerge in

water

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity supply is

the same as that indicated on the rating plate. This product is designed to operate on

230VAC 50Hz. Connecting it to any other power source may cause damage.

This product may be fitted with a non-rewireable plug. If it is necessary to change the

fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or

damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to

damage, it should be cut off and a replacement fitted, following the wiring instructions

shown below. The old plug must be disposed of safely, as insertion into a mains socket

could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with the

markings on the terminals of your plug, proceed as follows.

• The wire which is coloured Blue must be connected to the terminal which is

marked Nor coloured Black.

• The wire which is coloured Brown must be connected to the terminal which is

marked Lor coloured Red.

We strongly recommend that this machine is connected to the mains supply via a

Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

This symbol indicates that this is a Class II product, and does not require an earth

connection.

WARNING! Read these electrical safety instructions thoroughly

before connecting the product to the mains supply.

WARNING! The wires in the power cable of this product are

coloured in accordance with the following code:

Blue = Neutral Brown = Live

Plug must be BS1363/A approved.

Always fit a 3 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

HOW TO CHARGE A BATTERY

NOTE: New batteries must be charged before use.

1. Connect the battery charger to the power supply.

2. Slide the battery on to the battery

charger until the battery clicks

into position.

3. To remove the battery, push the

latches on each side of the

battery and slide it from the

battery charger.

4. After charging, disconnect the

charger from the power supply.

INDICATOR LIGHTS

When the battery pack is secured in the battery charger, the indicator lights

on the battery charger will show the charging status:

WARNING: THE BATTERY CAN BE HOT TO THE TOUCH WHEN REMOVED

FROM THE TOOL. ALWAYS LET THE BATTERY COOL DOWN BEFORE

RECHARGING. DO NOT RECHARGE A HOT BATTERY.

Steady

GREEN

Battery is fully charged or no battery is fitted.

Flashing

GREEN

Charging and the battery is more than 90% full.

Steady RED Charging

RED and

GREEN lights

both

flashing the

same time

The battery pack is too hot or too cold for charging (below

0°C/32°F or above 45°C/113°). You should let the battery

pack cool down for approximately 30 minutes before

attempting to recharge.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TIPS FOR EXTENDING BATTERY LIFE

• Do not store empty (flat) batteries. Charge fully before storing.

DECLARATION OF CONFORMITY

RED and

GREEN light

flashing

alternatively

The battery is defective and needs to be replaced, remove

and reinstall the battery into the charger. If the lights status

still shows defective, try charging a different battery. If a

different battery charges normally, dispose of the defective

battery. If a different battery also indicates "Defective", the

charger may be defective.

Andere Handbücher für ZX-R Pro Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Akkuladegerät Handbücher

Clarke

Clarke Start N Charge WIBC200 Bedienungsanleitung

Clarke

Clarke Start'N'Charge BC250 Bedienungsanleitung

Clarke

Clarke HFBC12-24 Bedienungsanleitung

Clarke

Clarke Start-N-Charge BC260N Bedienungsanleitung

Clarke

Clarke WBC400 Bedienungsanleitung

Clarke

Clarke IBC25 Bedienungsanleitung

Clarke

Clarke Start-N-Charge BC420N Installations- und Betriebshandbuch

Clarke

Clarke CBO9-12 Bedienungsanleitung

Clarke

Clarke CBO3-12 Bedienungsanleitung

Clarke

Clarke WIBC250 Bedienungsanleitung

Clarke

Clarke AC80 Bedienungsanleitung

Clarke

Clarke Start N charge BC100N Handbuch

Clarke

Clarke IBC4 Bedienungsanleitung

Clarke

Clarke LA4 Bedienungsanleitung

Clarke

Clarke IBC7 Bedienungsanleitung

Clarke

Clarke JSM180 Installations- und Betriebshandbuch

Clarke

Clarke BC125 Bedienungsanleitung

Clarke

Clarke IBC80 Bedienungsanleitung

Clarke

Clarke Start'N'Charge BC185N Bedienungsanleitung

Clarke

Clarke ATC12V Bedienungsanleitung

Clarke

Clarke IBC8 Bedienungsanleitung

Clarke

Clarke IBC5 Bedienungsanleitung

Clarke

Clarke Start n charge BC260N Handbuch

Clarke

Clarke Start-N-Charge BC150 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung