Clarke AC80 Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS0515

AUTOMATIC BATTERY CHARGER

MODEL NO: AC80

PART NO: 6266315

INTRODUCTION

Thank you for purchasing this CLARKE Battery Charger.

Please read this manual thoroughly, before attempting

to operate, and carefully follow all instructions given.

It is vitally important that ALL precautions are taken, as

specified, which will not only provide protection for

yourself and that of others around you, but will also

ensure that the Battery Charger will give you long and

satisfactory service.

This battery charger is limited to use with 12V

lead acid/

gel including MF (Sealed) and Leisure batteries

ONLY. DO NOT attempt to charge other types of battery.

GUARANTEE

This CLARKE product is guaranteed against faulty

manufacture for a period of 12 months from the date of

purchase. Please keep your receipt as proof of

purchase.

This guarantee is invalid if the product is found to have

been abused or tampered with in any way, or not used

for the purpose for which it was intended.

Faulty goods should be returned to their place of

purchase, no product can be returned to us without

prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

• IMPORTANT: ALWAYS disconnect the battery from the

vehicle BEFORE connecting the charger leads. This is

to prevent damage being caused to the vehicle

electronic system.

• This battery charger is designed for INDOOR use ONLY.

Do not use outdoors, exposed to the elements.

• Do not use for any other type of battery, or supply

power to low voltage electrical systems.

• Connect the battery clamps to the battery terminals

before plugging the charger in to the mains power

supply.

• This battery charger is limited to use with 12V

lead

acid/ gel including MF (Sealed) and Leisure

batteries

ONLY. DO NOT attempt to charge other

types of battery.

• Do not attempt to charge a battery with a capacity

exceeding that indicated in the ‘Specifications’.

• Do not operate the charger if any of the cables are

damaged. Consult your Clarke dealer for repair or

replacement of the parts.

• Do not operate the charger if the case is damaged.

Consult your Clarke dealer for inspection and repair.

• Do not disassemble the charger, incorrect reassembly

may result in electric shock or fire.

• Ensure the battery posts and battery clamps are

perfectly clean before use.

• Disconnect from the mains power supply before

making or breaking connections to the battery.

• Make sure the battery is topped up with distilled

water, (where applicable), to its proper level, before

connecting the charger.

• Unscrew the battery filler caps fully, (where

applicable), and leave them loose for the duration of

charge, to ensure that gases are allowed to escape.

NOTE: ALWAYS clean around the filler caps

thoroughly before unscrewing, to ensure

that no dirt can enter the battery cell.

Ensure the breather holes, in the caps, are

perfectly clear before screwing in again.

• When charging is complete, disconnect the negative

cable first and then the positive cable.

• Always place the charger in an environment which is

- well ventilated

- out of the reach of children

- not exposed to direct sunlight or heat source

- away from water / moisture, oil and grease

- away from explosive gases, flames, and sparks

- away from any flammable substance

ELECTRICAL CONNECTIONS

THIS APPLIANCE IS DOUBLE INSULATED

This appliance is fitted with a 13 amp, BS 1363 plug which

should be connected to a standard 230 VAC (50Hz)

electrical supply. If the plug is replaced, the

replacement must be to the same specification and

wired in accordance with the following code:

Blue - Neutral

Brown - Live

As the colours of the flexible cord of this appliance may

not correspond with the coloured markings identifying

terminals in your plug proceed as follows:

• Connect BROWN cord to terminal marked with a

letter “L” or coloured RED

• Connect BLUE cord to terminal marked with a letter

“N” or coloured BLACK

If in doubt, consult a qualified electrician.

In the event a moulded plug is fitted, and is subsequently

cut from the electric cable, the replacement plug MUST

be an approved 5 amp, BS 1363 plug and wired in

accordance with the above instructions. Additionally,

please note:

The discarded plug must be thrown away as there is a

danger of electric shock if it is subsequently inserted into

a socket outlet.

1. Never use the plug without the fuse cover fitted.

2. Should you wish to replace a detachable fuse

carrier, ensure that the correct replacement is

used (as indicated by marking or colour code).

3. Replacement fuse covers can be obtained from

your local dealer or most electrical stockists.

FUSE REPLACEMENT

The fuse in the plug must be replaced with one of the

same rating (5 amps) and this replacement must be

ASTA or BSI approved to BS1362.

EXTENSION CABLES

If an extension cable is used, the conductors in the

cable MUST be a minimum 1.5mm

. Additionally, ensure

the cable is completely unwound from the drum.

USING THE CHARGER

This model is a fully automatic charger (will shut off when

fully charged) for any type of battery up to a capacity

of 15-120AH.

This charger will not charge a totally flat battery, the

battery must be able to supply a minimum of 3 Volts

before charging will commence.

LED’s on the front panel from top to bottom:

DISCONNECT THE BATTERY FROM THE VEHICLE

If the battery is still in the vehicle, ensure the battery

terminals are disconnected from the vehicles electrical

system. Disconnect the negative (EARTH) terminal first,

followed by the positive terminal. (When reconnecting,

do so in reverse order).

GREEN

Battery is fully charged. The charger

may be left connected if required, it

will provide a top up charge as and

when necessary

YELLOW

Battery not fully charged, charging will

commence when the charger is

connected to mains power

GREEN

Mains supply is ON.

RED

Polarity warning, if this lights up the

clamps connected to the battery

should be reversed.

CONNECT THE CHARGER TO THE BATTERY

1. Connect the red battery clamp to the positive

(+ve) battery terminal.

2. Connect the black clamp to the negative (-ve)

terminal.

• Make sure that both connections are secure and NOT

touching each other.

3. Select the battery type (normal or gel cell) using

the selector switch.

4. Select the charging speed required (trickle

charge or fast charge).

CHARGE THE BATTERY

1. Plug in the charger and switch ON at the mains

supply to commence charging.

• When charging is complete, the green Fully Charged

LED will light up.

The charger may be left

connected, it will monitor the battery and

provide a top up charge when necessary.

DISCONNECTING THE CHARGER

1. Switch OFF at the mains supply

• Remove the black clamp from the

negative (-ve)

terminal first,

• Then remove the red clamp from the positive (+ve)

terminal.

2. Reconnect the battery to the vehicle.

SAFETY FEATURES

Whenever a fault condition exists, the circuitry

automatically disengages the normal operation of the

charger.

THERMAL OVERLOAD

The thermal overload protector provides a safeguard

against an excessively large charging current being

drawn by the battery for prolonged periods.

SHORT CIRCUIT

The charger is fully protected against short circuits, i.e.

the clamps coming into contact, directly or indirectly

when the unit is switched ON. If a short circuit happens,

the charger will switch off, and return to normal after

one or two minutes.

REVERSE POLARITY

The charger is fully protected against the possibility of the

clamps being incorrectly connected. If the

Polarity

Warning LED illuminates the clamps connected to

the battery should be reversed.

SPECIFICATIONS

Model AC80

Input Voltage 230V @ ~50Hz

Battery Voltage: 12V

Rated charging current:

(DC)

2.5A (Trickle),

5.6A (Fast)

IP Rating: IP20

Minimum battery size:

(Ah/CCA)

15 (Ah/CCA)

Maximum battery size:

(Ah/CCA)

120 (Ah/CCA)

Operating Temperature

Range: (°C)

-10 to 45°C

Compatible battery

types:

Lead acid/ gel

including MF (Sealed)

and Leisure batteries

Dimensions (D x W x H) 100 x 180 x 230 mm

Weight (kg) 2.8

Part Number 6266315

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Akkuladegerät Handbücher

Clarke

Clarke BC125 Bedienungsanleitung

Clarke

Clarke BC520P Bedienungsanleitung

Clarke

Clarke BC 700 Handbuch

Clarke

Clarke DIGICAR 600 Bedienungsanleitung

Clarke

Clarke Start N charge BC100N Handbuch

Clarke

Clarke Start n charge BC100B Bedienungsanleitung

Clarke

Clarke ATC12V Bedienungsanleitung

Clarke

Clarke Start-N-Charge BC420N Installations- und Betriebshandbuch

Clarke

Clarke WIBC250 Bedienungsanleitung

Clarke

Clarke WBC400 Bedienungsanleitung

Clarke

Clarke Start'N'Charge BC250 Bedienungsanleitung

Clarke

Clarke Start-N-Charge BC130 Bedienungsanleitung

Clarke

Clarke CB09-6/12 Bedienungsanleitung

Clarke

Clarke HFBC12-24 Bedienungsanleitung

Clarke

Clarke CBO3-12 Bedienungsanleitung

Clarke

Clarke IBC5 Bedienungsanleitung

Clarke

Clarke Start'N'Charge BC185N Bedienungsanleitung

Clarke

Clarke DIGICAR 900 Bedienungsanleitung

Clarke

Clarke Start-N-Charge BC120C Bedienungsanleitung

Clarke

Clarke IBC2 Bedienungsanleitung

Clarke

Clarke JSM180 Installations- und Betriebshandbuch

Clarke

Clarke Start'N'Charge WBC180 Bedienungsanleitung

Clarke

Clarke Start-N-Charge BC100C Installations- und Betriebshandbuch

Clarke

Clarke Start n charge BC260N Handbuch

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung