Clarke Air 25C Installations- und Betriebshandbuch

Long NozzleBlow Gun

Model : 25C

Part No : 3090155

OPERATING & MAINTENANCE

INSTRUCTIONS

0303

WARNING

Compressed air can be

dangerous. Ensure that you are

thoroughly familiar with all

precautions relating to the use

of compressors and

compressed air supply.

Please read these instructions carefully before operating the tool

Thank you for purchasing this CLARKE Long Nozzle Blow Gun

Before using the device, please read this manual thoroughly and carefully

follow all instructions given. This is for your own safety and that of others

around you, and is also to help you achieve long and trouble free service

from your new blow gun.

This simple to operate trigger action

blow gun can be used to blow away

dust and wood shavings as well as metal

filings and swarf.

Take great care when using this

appliance... DO NOT use high air

pressure when cleaning dust from

electrical or electronic components.

Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change

specifications at any time without prior notice.

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture

for a period of 12 months from the date of purchase. Please keep

your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been

abused or tampered with in any way, or not used for the pur-

pose for which it was intended.

Faulty goods should be returned to their place of purchase, no

product can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Accessories

A wide range of airline accessories is available from your nearest CLARKE dealer, for further information, contact your nearest dealer, or telephone

CLARKE International Sales department on 01992 565300.

PARTS & SERVICE TEL: 020 8988 7400

or e-mail as follows:

PARTS: [email protected]

SERVICE: [email protected]

Maintenance

IMPORTANT

Disconnect the gun from the air supply,

and relieve any pressure in the gun and

hose, before any disassembly.

The only maintenance other than to replace

worn or broken parts, is to keep the gun

clean and lubricated.

Occasionally clean the gun and lubricate

all moving parts, especially the trigger stud.

Inspect the gun and air hose for wear or

damage periodically, and replace if

necessary.

DO NOT use damaged or leaking hoses.

ALWAYS wear a suitable approved breathing mask, to protect against inhalation

of dust or fumes.

ALWAYS wear approved impact resistant safety goggles. Eye glasses are NOT

safety glasses.

ALWAYS disconnect the gun from the air supply when it is not in use, and before any

disassembly.

NEVER point gun towards people or animals. In the case of injury, seek expert

medical advice immediately.

NEVER allow children to use or play with this appliance.

SAFETY PRECAUTIONS

For your personal safety and that of others around you. Follow these

safety instructions carefully.

Blow guns should only be connected to an

airline precedded by a pre-set tamper-

proof pressure regulator set at a reduced

pressure from the normal 80 psi airline

supply.

If in any doubt, please contact your

nearest Clarke service department.

The air supply should be completely cllean

and dry.

Lubricators of any kind should not be used

with blow guns.

WARNING

Specifications

Model: ...................................... 25C

Part No: .................................... 3090155

Air Inlet Connector: ................ ¼”BSP

Minimum Compressor Size: .... 0.65HP

WARNING

Compressed air can be

dangerous. Ensure that you are

thoroughly familiar with all

precautions relating to the use of

compressors and compressed air

supply.

Dieses Handbuch passt für folgende Modelle

Andere Clarke Elektrowerkzeuge Handbücher

Clarke

Clarke Woodworker CJS1-C Installations- und Betriebshandbuch

Clarke

Clarke CCIW160 Installations- und Betriebshandbuch

Clarke

Clarke CCT48 Bedienungsanleitung

Clarke

Clarke CWS200B Bedienungsanleitung

Clarke

Clarke Strong-Arm AHP 26 Bedienungsanleitung

Clarke

Clarke Woodworker CPT600 Installations- und Betriebshandbuch

Clarke

Clarke CBTSR Bedienungsanleitung

Clarke

Clarke X-PRO CAT140 Installations- und Betriebshandbuch

Clarke

Clarke Air CAT147 Installations- und Betriebshandbuch

Clarke

Clarke COEBS1 Bedienungsanleitung

Clarke

Clarke CMFT250 Installations- und Betriebshandbuch

Clarke

Clarke Metalworker CDP502F Bedienungsanleitung

Clarke

Clarke CAT115 Bedienungsanleitung

Clarke

Clarke STRONG-ARM CSA4B Bedienungsanleitung

Clarke

Clarke CDP10B Bedienungsanleitung

Clarke

Clarke CAT108 (1/2) Handbuch

Clarke

Clarke Air CSG3KC Installations- und Betriebshandbuch

Clarke

Clarke CONTRACTOR CON800 Installations- und Betriebshandbuch

Clarke

Clarke CCRT266 Bedienungsanleitung

Clarke

Clarke X-Pro CAT199 Installations- und Betriebshandbuch

Clarke

Clarke Air CAT149 Installations- und Betriebshandbuch

Clarke

Clarke CDP152B Bedienungsanleitung

Clarke

Clarke CAT82B Handbuch

Clarke

Clarke CIR450 Installations- und Betriebshandbuch

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch

Silca

Silca MARKER 2000 Bedienungsanleitung