Classic Exhibits Magellan Designs VK-1091 Bedienungsanleitung

www.classicexhibits.com

Step 1

Page 1 of 3

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX - VK-1091 - Magellan Miracle - General Layout

10’

Plan View

www.classicexhibits.com

Step 2

Page 2 of 3

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX - General Information

Using You Set-up Instructions:

The Visionary Designs Set-up Instructions for Magellan displays are created

specifically for your configuration. They are laid out sequentially, including an

exploded view of the entire display and a logical series of detailed steps for

assembly. We encourage you to study the instructions before attempting to

assemble your exhibit.

THIS IS VERY IMPORTANT!

Each page reminds you to tighten the setscrews after disassembling your

exhibit to prevent loss of the locks and setscrews (see below in red).

Cleaning & Packing Your Display:

1) Use care when cleaning aluminum extrusions or acrylic inserts. Use only

non-abrasive cleaners.

2) When cleaning laminate inserts or counter tops, use mild cleansers and

a soft material such as cotton.

3) Keep all display components away from extreme heat and long exposure

to sunlight to avoid warping and fading.

4) Retain all packing materials. It will make re-packing much easier and will

reduce the likelihood of shipping damage.

Hex Key Tool

Typical Connection Typical Connection

Most visionary design exhibits can

be assembled with the supplied Hex

Key Tool. Occasionally, a flat head

screwdriver may be required.

Detail A: Most horizontal extrusion connections have a patented expandable lock. This lock inserts into

the groove of an opposing extrusion. Tightening the lock with the Hex Key Tool expands the lock and creates

a strong positive connection.

Numbered

Label

Detail B: Each extrusion contains a numbered label that

corresponds to set-up instructions. The label is located

within a groove of the extrusion (when possible). Visionary

Design labels contain Black numbers unless otherwise

specified.

Horizontal Connection

Detail C: A rectangular connection bar with plastic

T Knobs is inserted between two horizontal extrusions

joined end-to-end. Turn the knobs clockwise to tighten.

Do Not Overtighten.

www.classicexhibits.com

Step 1

Page 1 of 3

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX - Backwall Assembly

GREEN STAR indicates location

of connection lock with knob.

Knob

**Do not over tighten Knobs.**

RED STAR indicates location

of connection bar knob.

Turn Knob Clockwise

to Tighten Lock

Rear View of Display

**Do not over tighten Knobs.**

Knob

Connection

Bar

Part #

7a/7b

8a/8b

Qty

1/1

Description

48.5” Lower Curved Extrusion

48.5” Upper Curved Extrusion

48.5” Lower Curved Extrusion

48.5” Upper Curved Extrusion

48.5” Lower Curved Extrusion

48.5” Upper Curved Extrusion

44” Lower Horizontal Extrusion

44” Upper Horizontal Extrusion

23” Lower Horizontal Extrusion

23” Upper Horizontal Extrusion

Backwall Support Leg Extrusion

Steps

Unit can be assembled face down on the floor then lifted upright.

Connect backwall upper and lower verticals together [ 1 to 2, 3 to 4 and 5 to 6].

2) Connect horizontal extrusions together [7a to 7b and 8a to 8b].

3) Attach horizontal assemblies [7a/7b and 8a/8b] between vertical

assemblies [1/2 and 3/4].

4) Attach horizontal extrusions [9 and 10] between vertical assemblies

[3/4 and 5/6].

5) Attach support leg extrusions [11 and 12] to back of verticals [1 and 5], see

leg attachment detail.

Note: Slide connection

bar between extrusions and

tighten knobs to secure.

Velcro at top of bar

Velcro at bottom of bar

Velcro at left

& right of bar Velcro at

left of bar

Velcro at

right of bar

FRONT

VIEW

BACK

VIEW

BACK VIEW

Light Connection

Attach lights to

backwall where

desired and

tighten in place.

Keep assembled

when shipping

Backside of backwall

Connect support leg to vertical

by placing lock into slot and

tighten with Allen Wrench.

Support Leg Attachment

(If accidentally removed from vertical)

Graphic Attachment

Apply graphic to back

of assembled backwall.

www.classicexhibits.com

Step 2

Page 2 of 3

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX -

Backwall Workstation Assembly

Part Number

14a

Qty

Description

Base Plate

37.6”h Curved Vertical Extruaion

Oval Flange Plate

18.5”w Horizontal Extrusion

15.69”w Horizontal Extrusion

Steps

Attach curved vertical [14] to base plate [13],

see Base Plate Attachment detail.

2) Attach horizontal extrusions [15 and 16] between

curved vertical [14] and backwall vertical [3]

where indicated.

3) Attach flange plate to top of vertical [14] as shown.

4) Place counter top on assembled counter base,

see Counter Attachment detail.

Base Plate Attachment

Connect Vertical Extrusion to Base

Plate by placing lock into slot

and tighten with tool.

14a

Screw

Counter Top Attachment

Insert screws located on underside

of counter into holes on flange plate

and secure with wing nuts.

Note: Extrusions [14, 15

and 16] must stay assembled

when shipping unit in case.

www.classicexhibits.com

Step 3

Page 3 of 3

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX - MOD-1238 Pedestal Assembly

**** Side assemblies must stay

assembled when shipping in jigged case

Part Number

21/21a

Qty

4/2

Description

41.5” Vertical Extrusion

41.5” Corner Extrusion

41.5” Vertical Extrusion

11” Horizontal Extrusion

24.875” Horizontal Extrusion

9” Horizontal Extrusion

Steps

Attach horizontal extrusions [21 and 21a] between vertical

extrusions [17&18 and 19&20], see Top View for

extrusion orientation.

2) Attach curved horizontal extrusions [22] between

corner extrusions [18 and 19], placing insert between

curved horizontals.

3) Connect horizontal extrusions [23] to vertical extrusions

[17 thru 20] for shelf support.

Sintra Insert

21a

Top View

18 19

21 21

Shelf

Steps (Cont’d):

3) Place shelf atop lip of extrusions.

4) Set counter top atop assembled base.

5) Place outer shelves atop supports [23].

Counter

Extrusions 21a and

22a have a lip for the

floor to rest

upon.

Lip for Shelf

Placement

Lip

Extrusion Details:

21a

Lip for Shelf

Placement

Outer Shelf

www.classicexhibits.com

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX - Packing Instruction - Case 1 of 2

Base

Plate

Flange Plate

Connectors

Backwall

Counter

Extrusion 9&10

Extrusion 7a, 7b, 8a and 8b

Top View

Additional Items:

Halogen Lights

Graphic

Setup Hardware

Extrusion 15

Extrusion 16

Extrusion 14

Connectors

Extrusion 1/11, 2 and 3

Extrusion 5/12, 6 and 4

Level 1 Level 2 Level 3 Level 4

www.classicexhibits.com

866.652.2100

WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL

SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

Order #XXXXX - Packing Instruction - Case 2 of 2

Top View

(1) Assembled Workstation Side

Workstation

Shelf

Case 2: Workstation components

Workstation

Counter

(2)Extrusion 22

(1) Assembled Workstation Side

Level 2 Level 4

(x2)

Level 3Level 1 (Bottom)

Inhaltsverzeichnis

Andere Classic Exhibits Inneneinrichtung Handbücher

Classic Exhibits

Classic Exhibits MAGELLAN DESIGNS VK-1088 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Euro LT Hybrids MOD-1121 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1012 Handbuch

Classic Exhibits

Classic Exhibits eco systems ECO-2041 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1109 Handbuch

Classic Exhibits

Classic Exhibits SYMPHONY SYK-2003 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-1005 Handbuch

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS VK-3006 Handbuch

Classic Exhibits

Classic Exhibits SEGUE DESIGNS VK-1960 Supernova Bedienungsanleitung

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1114 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS LTK-1152 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids MOD-1246 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1702 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SACAGAWEA DESIGNS VK-1226 Bedienungsanleitung

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1703 Handbuch

Classic Exhibits

Classic Exhibits LTG-1001 Bedienungsanleitung

Classic Exhibits

Classic Exhibits eco systems ECO-4100 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS VK-4022 Handbuch

Classic Exhibits

Classic Exhibits visionary MOD-1294 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS VK-1341 Handbuch

Classic Exhibits

Classic Exhibits gravitee GK-1014 Bedienungsanleitung

Classic Exhibits

Classic Exhibits eco systems ECO-8C Handbuch

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1590 Handbuch

Classic Exhibits

Classic Exhibits SYMPHONY SYM-406B Handbuch

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung