Classic Exhibits VISIONARY DESIGNS VK-3006 Handbuch

Order #XXXXX

SETUP INSTRUCTIONS

If you would like to tell us about your experience with your setup instructions please email us at [email protected]

VK-3006 - 10’ x 30’ Inline Display

Plan View

10’

30’

Order #XXXXX General Information

DO NOT USE POWER TOOLS

ALL CONNECTIONS MUST

BE TIGHTLY SECURED

Part Identification - Numbering

Spline Connection Base Plate & Extrusion Connection

General Setup Instructions

- Read entire setup instruction manual prior to

unpacking parts and pieces.

- The setup instructions are created specifically

for this configuration.

- Setup instructions are laid out sequentially in

steps, including exploded views with detailed

explanation for assembly.

WARNING

Cleaning & Packing

- For Cleaning Metal, Plex, & Laminate Parts:

Use a MILD NON-ABRASIVE cleanser and

soft cloth/paper towel to clean all surfaces.

- Keep exhibit components away from heat

and prolonged sun exposure.

Heat and UV exposure will warp and

fade components.

- Retain all provided Packing Materials.

All provided packing materials are for

ease of repacking & component protection.

Disassembly

- For loss prevention, tighten all setscrews

and locks during disassembly

Hex Tool - Essential for Assembly

Extrusion & Lock Connection Engaged Lock

LADDERS OR LIFTS

MAY BE REQUIRED

Order #XXXXX

Step 1 of 12

Closet Assembly

When assembled

Top View

S44

PR37

Velcro

Steps:

1) Connect PR37 to verticals [4,7], as shown.

Note: PR37 should remain attached to verticals

during disassembly.

2) Attach lower horizontals [12,14,15] & Door Threshold

between verticals [4,5,6,7,8,9,10,11] as shown, &

connect horizontal [13] between verticals [4,11].

See Door Threshold Attachment detail.

3) Slide Infills between verticals; secure with upper

horizontals [12A,13A,14A,15A].

Item

5,6,7

8,9,10

12/12A

13/13A

14/14A

15/15A

Qty.

1,1,1

3/3

1/1

3/3

Description

96”h S44 Vertical Extrusion w/ Door Stop

96”h S44 Vertical Extrusion

96”h S44 Vertical Extrusion w/ Door Hinge

22.126”w Z45 Horizontal Extrusion

22.5”w Z45 Horizontal Extrusion

22.126”w Z45 Horizontal Extrusion

Door Threshold

92.4”h PR37 Vertical Extrusion

12A

15A

13A

14A

12A

Door

Threshold 15

ill

nfil

ill

nfi

Slide PR37 extrusion into

groove of vertical and tighten

set screw to secure in place.

PR37

Extrusion

Profile

Velcro

Door Threshold

Tighten

setscrew

to secure

Slide Connector

into Groove

of Extrusion

Door Threshold

Attachment

Top View

S44 PR37

Velcro

Order #XXXXX

Step 2 of 12

Closet Attachments

Caps

Monitor

Mount

Steps:

1) Install Door to Vertical [11]. See Door Attachment detail.

2) Attach Monitor Mount to Verticals [9,10].

See Monitor Mount Attachment detail.

3) Connect Header Graphic to Verticals [8,9,10,11] using

screw caps. See Header Attachment detail.

Door

Hinge

Slide pin into

hinge attached

to vertical.

Slide door

hinge over pin.

Door Attachment

*Monitor Mount Attachment

Bolt

Monitor

Mount

Stand-Off

Barrel

Connectors

Attach Monitor Mount to V4 Connectors

using bolts.

Slide V4 Connections into vertical

channel of extrusions. Tighten set

screw to secure.

Graphic

V4 Connector

Slide V4 connector into groove. Tighten set

screw to secure V4. Insert screw cap through

hole of graphic & into V4 connector.

Tighten screw cap to secure in place.

Header Attachment

Screw Cap

Header Graphic

****

Order #XXXXX

Step 3 of 12

Left Backwall Assembly

When assembled

Item

17/17A

18/18A

Qty.

1/1

Description

Boomerang Foot

96”h S44 Vertical Extrusion

40”w Z45 Horizontal Extrusion

96” Z45 curved Horizontal Extrusion

92.4”h PR37 Vertical Extrusion

Steps:

1) Connect PR37 to verticals [2,16], as shown.

Note: PR37 should remain attached to verticals

during disassembly.

2) Attach Boomerang Foot [1] to vertical [2].

See Boomerang Foot Attachment detail.

3) Attach horizontals [17,17A,18,18A] between

verticals [4,16,2] as shown.

4) Apply fabric graphic to back side of frame

assembly, using Velcro.

Slide PR37 extrusion

into groove of vertical

and tighten set screw

to secure in place.

PR37

Extrusion

Profile

Velcro

Boomerang Foot Attachment

Bolt

set

screw

Foot

Vertical

Attach foot with Bolts.

Slide V4 Connectors

into groove of vertical

extrusion & tighten

set screw to secure.

17A

18A

Attach graphic

to velcro on back of

assembled frame

Top View

S44 PR37

PR37

VelcroVelcro

Top View

S44 PR37

Velcro

Order #XXXXX

Step 4 of 12

Right Backwall Assembly

When assembled

Item

20/20A

21/21A

Qty.

1/1

Description

Boomerang Foot

96”h S44 Vertical Extrusion

40”w Z45 Horizontal Extrusion

96” Z45 curved Horizontal Extrusion

92.4”h PR37 Vertical Extrusion

Steps:

1) Connect PR37 to verticals [2A,19], as shown.

Note: PR37 should remain attached to verticals

during disassembly.

2) Attach Boomerang Foot [1] to vertical [2A].

See Boomerang Foot Attachment detail.

3) Attach horizontals [20,20A,21,21A] between

verticals [7,19,2A] as shown.

4) Apply fabric graphic to back side of frame

assembly, using Velcro.

Slide PR37 extrusion

into groove of vertical

and tighten set screw

to secure in place.

PR37

Extrusion

Profile

Velcro

Boomerang Foot Attachment

Bolt

set

screw

Foot

Vertical

Attach foot with Bolts.

Slide V4 Connectors

into groove of vertical

extrusion & tighten

set screw to secure.

21A

20A

21 *

Attach graphic

to velcro on back of

assembled frame

Top View

S44 PR37

PR37

VelcroVelcro

Top View

S44

PR37

Velcro

Order #XXXXX

Step 5 of 12

Left Aero Ring Assembly

Connections are made by holding the button

down and sliding the red tube into opposing

tube until the connection is made. To disassemble

push button and pull or twist extrusions apart.

Push-Button

Numbered Label

Using Your Setup Instructions

The Aero Overhead Sign Setup Instructions are created specically for your conguration. They include an

exploded view of the frame which is sequentially numbered. We encourage you to study the instructions

before attempting to assemble your exhibit.

Connections are kept very simple: no tools. Everything assembles with push-button

connectors and pre-connected horizontal sections.

Cleaning and Packing Your Display

1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.

2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood

of shipping damage.

10 4

When assembled

Steps:

1) Assemble Aero frame parts together

in numerical order, as shown.

2) Attach pillowcase graphic to assembled

frame.

Order #XXXXX

Step 6 of 12

Right Aero Ring Assembly

Connections are made by holding the button

down and sliding the red tube into opposing

tube until the connection is made. To disassemble

push button and pull or twist extrusions apart.

Push-Button

Numbered Label

Using Your Setup Instructions

The Aero Overhead Sign Setup Instructions are created specically for your conguration. They include an

exploded view of the frame which is sequentially numbered. We encourage you to study the instructions

before attempting to assemble your exhibit.

Connections are kept very simple: no tools. Everything assembles with push-button

connectors and pre-connected horizontal sections.

Cleaning and Packing Your Display

1) Use care when cleaning aluminum extrusion or acrylic inserts. Use only non-abrasive cleaners.

2) Retain all packing material. It will make re-packing much easier and will reduce the likelihood

of shipping damage.

10 4

Steps:

1) Assemble Aero frame parts together

in numerical order, as shown.

2) Attach pillowcase graphic to assembled

frame.

When assembled

Order #XXXXX

Step 7 of 12

Workstation Assembly

When assembled

Item

9/9A/9B

10/10A

11/11A

Qty.

4/4/4

4/4

Description

66”h S40 Vertical Extrusion

36”h S40 Vertical Extrusion w/ Door Hinge

36”h S40 Vertical Extrusion w/ Door Stop

40.975” S40 curved Vertical Extrusion

5.24”w Z32 Horizontal Extrusion w/ mitred end

18.5”w S40 Horizontal Extrusion

21.02” x 4.5” Mounting Plate

Steps:

1) Connect curved extrusions [5,6] between

verticals [1,2,3,4] using horizontals [7,8].

2) Attach lower horizontal [9] between

verticals [1,2]; connect lower horizontal [10]

between verticals [3,4].

3) Attach Door between verticals [3,4].

See Door Attachment detail.

4) Slide lower infills between verticals &

curved extrusions as shown; secure with

horizontals [9A,10A,11,11A].

5) Place Shelf inside assembly.

6) Place Counter Top onto assembly, sliding

over verticals [1,2].

7) Slide upper infill between verticals [1,2];

secure with upper horizontal [9B].

8) Attach Mountng Plate [12] to verticals [1,2];

& install Monitor Mount. See Monitor Mount

Attachment detail.

Repeat steps 1 thorugh 8 for other three

workstations.

QTY 4

10A

11A

Shelf

Counter

Top

Door

Hinge

Slide pin into

hinge attached

to vertical.

Slide door

hinge over pin.

Door Attachment

Then attach

wall plate to plate

using bolts and wing nuts

Install V4 connectors to verticals;

secure with setscrew. Attach

mounting plate to connectors.

Monitor Mount Attachment

connectors *

*Monitor

Mount

infill

S10

S10 Extrusion

Attached to

Counter Top

Order #XXXXX

Step 8 of 12

Workstation to Aero Ring Connection

Slide V4 connectors into groove of

horizontal extrusion. Tighten

set screws to secure V4 in place.

Attach bracket to V4 using bolt.

When assembled

Custom Bracket Connection

bolt

set

screw

Bracket

S40 Extrusion

Aero Frame

Steps:

1) Slide assembled Kiosks over Aero frame.

2) Connect Aero Frame to Kiosks using custom bracket.

See Custom Bracket Connection detail.

Repeat steps 1 & 2 for other Aero Frame.

QTY 2

Inhaltsverzeichnis

Andere Classic Exhibits Inneneinrichtung Handbücher

Classic Exhibits

Classic Exhibits gravitee GOD-1557 Handbuch

Classic Exhibits

Classic Exhibits SACAGAWEA DESIGNS VK-1218 Bedienungsanleitung

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1590 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids LTK-1011 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary Magellan Miracle VK-2094 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1144 Bedienungsanleitung

Classic Exhibits

Classic Exhibits LTG-1001 Bedienungsanleitung

Classic Exhibits

Classic Exhibits VISIONARY DESIGNS MOD-1556C Bedienungsanleitung

Classic Exhibits

Classic Exhibits Symphony SYM-412 Handbuch

Classic Exhibits

Classic Exhibits SEGUE DESIGNS VK-1970 Handbuch

Classic Exhibits

Classic Exhibits Symphony SYK-1005 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS LTK-1152 Handbuch

Classic Exhibits

Classic Exhibits Euro LT Hybrids VK-1049 Handbuch

Classic Exhibits

Classic Exhibits SYK-1029 Handbuch

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1180 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1137 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1247 Bedienungsanleitung

Classic Exhibits

Classic Exhibits euro lt HYBRIDS Mod-1122 Bedienungsanleitung

Classic Exhibits

Classic Exhibits visionary DESIGNS MOD-1702 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Euro LT Hybrids MOD-1246 Bedienungsanleitung

Classic Exhibits

Classic Exhibits Symphony SYM-411 Handbuch

Classic Exhibits

Classic Exhibits visionary design MOD-1524 Bedienungsanleitung

Classic Exhibits

Classic Exhibits SYMPHONY SYK-1032 Handbuch

Classic Exhibits

Classic Exhibits LTK-1139 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung