CommScope SCIL-B Bedienungsanleitung

1.1 Product Description

Cable diameter range: 0-5mm, including fig.8 cable.

1.2 Kit Content

* Standard kit is listed below, alternative kits and

accessories are available.

1. 6-out multiport kit

2. Blank plugs

3. Tie wraps (8pcs)

4. Cleaning tissue

5. Foamstrip

6. Saddle seat and screw

7. Installation instruction

2 Cable Installation – Fig.8 Cable

2.1 Clean the cable for 1.5m from the cable jacket

end.

2.2 Install the cables according to the sequence

shown.

2.3 Remove the blank plugs from ports where cable

will be installed.

2.4Pull the cable through the gel block up to

1300mm.

SCIL-B 6-OUT MULTIPORT KIT

I N S T A L L A T I O NI N S T R U C T I O N

使使使使

用用用用

说说说说

明明明明

书书书书

1st 1st

2nd 2nd

3rd

TC-1362-3-IP

Rev A, Aug 2017

www.commscope.com

EM1354-001

Rev. A

2.5 Cable fixation position is shown below.

2.6 Wrap the cable with the foam strip at a proper

position, and secure the cable at the foam part with

tie wraps.

2.7 Install the saddle seat where the multiport kit will

be installed.

2.8 Install the tie wrap onto the saddle seat.

2.9 Insert the multiport kit into the slot shown.

2.10 Secure the multiport kit with tie wrap. Keep the

multiport kit level. Do not tilt the trigger part.

1 2 3

2.11 Remove the cable sheath at proper length, and

wrap the cable with the foam strip at the cable jacket

end. Secure the cable at the tray entrance with tie

wraps.

2.12 After closing all closure latches, screw the

multiport trigger clockwise until it stops.

3 Cable Installation – Round Cable

3.1 Clean the cable sheath with the cleaning tissue.

3.2 -3.6 Repeat 2.2 -2.6

3.7 Remove the cable jacket as shown.

3.8-3.11Repeat 2.7-2.10

3.12 Remove the loose tube up to 150mm from the

cable sheath end.

3.13 Clean the fiber bundle. Slide the transportation

tubes over the fibers up to 50mm from the cable

sheath end.

3.14 Route the transportation tubes to the tray

entrance. Secure the transportation tubes with tie

wraps.

3.15 After closing all closure latches, screw the

multiport trigger clockwise until it stops.

4. Re-entry & Additional Cable Installation

4.1 Unscrew the multiport trigger anti-clockwise first

and then open all latches to open the closure.

4.2 Repeat step 2.3.

4.3 After removing the multiport kit, store the

multiport kit at the cable port.

4.4 Repeat the steps in item 2 or 3 to install the new

cables.

CommScope and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.

This document is for planning purposes only and is not intended to modify or supplement any speciﬁcations or warranties relating to

CommScope products or services.

This product is covered by one ore more U.S. patents or their foreign equivalents. For patents, see:

www.commscope.com/ProductPatent/ProductPatent.aspx.

To ﬁnd out more about CommScope® products, visit us on the

web at www.commscope.com

For technical assistance, customer service, or to report any

missing/damaged parts, visit us at:

http://www.commscope.com/SupportCenter

Andere Handbücher für SCIL-B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CommScope Netzwerk-Hardware Handbücher

CommScope

CommScope RUCKUS SmartZone 300 Bedienungsanleitung

CommScope

CommScope ONECELL RP5200 Handbuch

CommScope

CommScope NETCONNECT 1479542-1 Bedienungsanleitung

CommScope

CommScope Uniprise Solutions HFTP-HD6B-1U-24 Bedienungsanleitung

CommScope

CommScope FPX Series Bedienungsanleitung

CommScope

CommScope SD-4U-SPLICE PANEL Bedienungsanleitung

CommScope

CommScope TC-96370-IP Bedienungsanleitung

CommScope

CommScope OneCell RP5000 Series Leitfaden

CommScope

CommScope SYSTIMAX 100BASE-T Bedienungsanleitung

CommScope

CommScope LSX Bedienungsanleitung

CommScope

CommScope ION-M17EHP/19P Bedienungsanleitung

CommScope

CommScope ION-M7P Bedienungsanleitung

CommScope

CommScope CPPR-QF-F-1U-E Bedienungsanleitung

CommScope

CommScope ST-BSP60 Bedienungsanleitung

CommScope

CommScope AMP NETCONNECT MRJ21 Bedienungsanleitung

CommScope

CommScope NOVUX DSC 650 Bedienungsanleitung

CommScope

CommScope SYSTIMAX AirSPEED AP542 Bedienungsanleitung

CommScope

CommScope EHD Bedienungsanleitung

CommScope

CommScope MRJ21 Quick Fit Cassette Bedienungsanleitung

CommScope

CommScope FDC-W8-FAT Bedienungsanleitung

CommScope

CommScope SYSTIMAX 360 iPatch G2 MPO Bedienungsanleitung

CommScope

CommScope FPX Series Bedienungsanleitung

CommScope

CommScope Mini-OTE 300 Bedienungsanleitung

CommScope

CommScope NG4access ODF Platform Value-Added Module Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung