Craftsman 125.16829 Bedienungsanleitung

CAUTION: Before using this

product, read this manual and

follow all its Safety Rules and

Operating Instructions.

4 Gallon Wet/Dry Vacuum

• Safety

• Assembly

• Operation

• Maintenance

• Parts

• Español - página 16

Operator’s Manual

Model No. 125.16829

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A

www.craftsman.com

Warranty

CRAFTSMAN LIMITED WARRANTY

FOR ONE YEAR from the date of sale this product is warranted against defects

in material or workmanship.

WITH PROOF OF SALE a defective product will be replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web page:

www. craftsman.com/warranty

This warranty does not cover ﬁlters, hose or attachments, which are expendable

parts that can wear out from normal use within the warranty period.

This warranty is void if this product is ever used while providing commercial

service or if rented to another person.

This warranty gives you speciﬁc legal rights, and you may also have other rights

which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL

INSTRUCTIONS BEFORE USING

THIS VACUUM.

Read and understand this operator's

manual and all labels on the Wet/Dry

Vacuum cleaner before operating. Safety

is a combination of common sense,

staying alert and knowing how your

vacuum works. Use this Wet/Dry Vac only

as described in this manual. To reduce

the risk of personal injury or damage to

your Wet/Dry Vac, use only Craftsman

recommended accessories.

Household Type

SAVE THIS MANUAL

FOR FUTURE REFERENCE.

When using an electrical appliance,

basic precautions should always be

followed including the following:

WARNING:

TO REDUCE

THE RISK OF FIRE, ELECTRIC

SHOCK OR INJURY:

• Do not run vac unattended.

• Do not vacuum, or use this Wet/Dry

Vac near flammable liquids, gases,

or explosive vapors like gasoline or

other fuels, lighter fluids, cleaners, oil-

based paints, natural gas, hydrogen,

or explosive dusts like coal dust,

magnesium dust, grain dust, or gun

power. Sparks inside the motor can

ignite flammable vapors or dust.

• Do not vacuum anything that is burning

or smoking, such as cigarettes,

matches, or hot ashes.

• Keep cord away from heated surfaces.

• Do not expose to rain. Store indoors.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Do not use with damaged cord, plug or

other parts.

• If vac is not working as it should, has

been dropped, damaged, left outdoors,

or dropped into water, take it to a

service dealer for inspection and repair

before using it again.

• Do not pull or carry by cord, use cord

as handle, close a door on cord, or pull

cord around sharp edges or corners.

• Do not run Wet/Dry Vac over cord.

• Do not handle plug or the Wet/Dry Vac

with wet hands.

• To reduce the risk of health hazards

from vapors or dusts, do not vacuum

toxic materials.

• Do not store near hazardous materials.

• Do not use this Wet/Dry Vac with a

torn filter or without the filter installed

except when vacuuming liquids as

described in the operation section of

this manual.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• To reduce the risk of injury from

accidental starting, unplug power cord

before changing or cleaning filter.

• Do not leave Wet/Dry Vac unattended

when plugged in. Unplug from outlet

when not in use and before servicing.

• Turn off Wet/Dry Vac before unplugging.

• Do not put any object into ventilation

openings. Do not vacuum with any

ventilation openings blocked; keep free

of dust, lint, hair or anything that may

reduce air flow.

• Keep hair, loose clothing, fingers, and

all parts of body away from openings

and moving parts.

• To reduce the risk of falls, use extra

care when cleaning on stairs.

When using as blower:

• Direct air discharge only at work area.

• Do not use Wet/Dry Vac as a sprayer -

it is not intended to dispense chemicals

such as fertilizer or pesticide.

• Do not direct air at bystanders.

• Keep children away when blowing.

• Wear safety goggles.

Polarized Plug

To reduce the risk of electrical shock, this

appliance has a polarized plug (with one

blade wider than the other). This plug will

fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a

qualified electrician to install the proper

outlet. Do not change the plug in any

way. Double insulation eliminates the

need for the three wire grounded power

cord and grounded power supply system.

Extension Cords

When using an extension cord with your Wet/Dry Vac refer to the following table

to determine the required A.W.G. (American Wire Gauge) wire size. Before using

Wet/Dry Vac, make sure it is in good working condition, including power cord.

Also, make sure extension cord is in good working condition prior to use. Make

repairs or replacements before using the vacuum cleaner. Only use extension cords

that are rated for outdoor use.

Length of Extension Cord

110V-120V 25 Feet

7.5 Meters 50 Feet

15.25 Meters 100 Feet

30.5 Meters 150 Feet

45.7 Meters

Amps A.W.G. Wire Size

0-6 18 16 16 14

7-10 18 16 14 12

11-12 16 16 14 12

13-16 14 12 Not recommended

Observe the following warnings that

appear on the motor housing of your Vac:

DOUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

• For your own safety, read and

understand owner's manual.

• Do not allow unit to be in

operation if unattended.

• Do not pick up hot ashes,

coals, toxic, ﬂammable, or other

hazardous materials.

• Do not use around explosive

liquids or vapors.

WARNING

WARNING: To reduce the risk of

electric shock - do not expose to rain

- store indoors.

WARNING: When using as a

blower:

Wear safety goggles labeled "ANSI

Z87.1" (Canada CSA Z94.3) on the

package. Turn unit off before setting

on ground or releasing grasp of

handle. Electric shock could occur

if used on wet surfaces. Direct tool

discharge only at work area. Do not

direct discharge at bystanders. Keep

children away.

Introduction

Table of Contents

This Wet/Dry Vac is intended for

vacuuming wet and dry materials and

may be used as a blower.

Read this operator's manual to

familiarize yourself with the product

features and to understand the speciﬁc

usage of your new Wet/Dry Vac.

Section Page

Warranty ...............................................2

Important Safety Instructions ..............2

Polarized Plug...................................3

Extension Cords ...................................3

Introduction ..........................................4

Table of Contents.................................4

Assembly ..............................................5

Carton Contents List ........................5

General Assembly Instructions........6

Operation ..............................................7

Vacuuming Dry Materials .................7

Vacuuming Liquids...........................8

Blower Operation..............................9

Section Page

Maintenance .......................................10

Emptying the Collection Tank........10

Installing & Cleaning

Reusable Cloth Filter......................10

Installing & Cleaning

Foam Sleeve Filter..........................11

Cleaning & Disinfecting

the Wet/Dry Vac..............................12

Storage............................................12

Troubleshooting .................................13

Repair Parts........................................14

Assembly

Remove entire contents of carton and

check for parts inside the collection

tank. Check each item against the

Carton Contents List. If any parts are

missing or damaged please call

1-888-331-4569 for replacement.

Carton Contents List

Key Description......................... Qty.

A Vac Handle............................. 1

B Power Head ........................... 1

C Floor Nozzle........................... 1

D Casters................................... 4

E Dry Reusable Filter ............... 1

F Foam Sleeve / Wet Filter ....... 1

G Extension Wands................... 3

H Hose ...................................... 1

I Operator’s Manual ................. 1

Handle

On/Off Switch

Power Head

Vacuum Port

Blower Port

Latch

Hose Storage

Caster

Collection Tank

EFG

Assembly (continued)

GENERAL ASSEMBLY INSTRUCTIONS

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Undo the latches and lift the power

head off of the collection tank.

(Fig. 2)

3. Remove the hardware package from

inside the collection tank. (Fig. 3)

4. Place the collection tank upside

down to insert the casters into the

sockets on the bottom. Put on a

pair of heavy duty protective gloves.

Place a screwdriver between the two

wheels on the bottom of the caster

as illustrated. Place hands on each

side of the screwdriver (handle side

and driving side), with the middle of

the screwdriver rod between the two

caster wheels, and press downward.

This distributes the force evenly and

provides extra leverage to insert

caster into position. Support the

collection tank to prevent it from

tipping when pressing in the casters.

(Fig. 4)

5. Insert the handle into the slots

located on the top of the power

head (Fig. 5)

6. Align the power head clasps with the

catches on the collection tank. Snap

power head into place by applying

pressure until the clasps click over

the catches. (Fig. 6)

7. Insert the large end of the hose into

the vacuum port on the front of the

collection tank.

8. Choose the desired accessory and

insert onto the end of the hose.

(Fig. 8)

9. After vac use, store hose,

accessories and cord as illustrated

on page 12.

Note that a static discharge chain is

attached to the bottom of the tank. It

is normal for this chain to drag on the

ground. Operating the vacuum in dry

conditions can build up static, and the

chain helps dissipate any build-up by

allowing a path of least resistance for

the static to discharge to the ground.

A Phillps head screw driver is required.

WARNING: Before assembling the Wet/Dry vac make sure that the power

cord is not plugged into a power outlet.

WARNING: Wear heavy duty protective gloves when performing the caster

insertion procedure to prevent cutting or puncturing palm of hand with the

driving end of the screwdriver.

Operation

Vacuuming Dry Materials

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. For dry vacuuming, the included

cloth ﬁlter must be installed correctly.

To verify, refer to Installing Reusable

Cloth Filter on page 10.

3. Place the power head back on the

container, and secure it in place

using the clasps. (Fig. 2)

4. Insert the large end of the hose into

the vacuum port and ﬁt it securely

into place. (Fig. 3)

5. Choose the desired accessory and

insert onto the attachment end of

the hose. (Fig. 4)

6. Verify that the On/Off switch is in the

Off position. Plug the power cord

into the outlet. (Fig. 5)

7. Turn the motor on by pressing the

power switch to the ‘I’ (ON) position

and begin vacuuming. (Fig. 6)

8. Once you have completed

vacuuming, press the power switch

to the ‘O’ (OFF) position and unplug

the power cord from the outlet.

O = OFF I = ON

DO NOT USE THE REUSABLE CLOTH

FILTER FOR LIQUID VACUUMING.

CAUTION: Do not vacuum drywall dust,

ﬁreplace soot or ash with standard

ﬁlter. This is very ﬁne dust which will

not be captured by the ﬁlter and may

cause damage to motor.

WARNING: Be sure to read, understand and apply all the information in the

Important Safety Instructions section at the beginning of this operator's manual.

Do not vacuum in areas with ﬂammable gases, vapors, or explosive dusts in the

air. Flammable gases or vapors include but are not limited to: lighter ﬂuid,

solvent type cleaners, oil-base paints, gasoline, alcohol, or aerosol sprays.

Explosive dusts include but are not limited to: coal, magnesium, grain, or gun

powder. To reduce the risk of health hazards from vapors or dust, do not

vacuum toxic materials.

WARNING: Before any Wet/Dry vac assembly or disassembly make sure that

the power cord is not plugged into a power outlet.

Operation (continued)

Vacuuming Liquids

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Remove cloth ﬁlter as shown in

Removing and Cleaning Reusable

Cloth Filter on page 10. Then install

the foam sleeve ﬁlter as shown in

Installing Foam Sleeve Filter on

page 12 and secure power head

back on the collection tank.

DO NOT USE THE CLOTH FILTER FOR

LIQUID VACUUMING.

3. Fit the desired nozzle to the vacuum

hose. (Fig. 2)

4. Verify that the power switch is in the

‘O’ (OFF) position before plugging

the power cord into the outlet.

(Fig. 3)

O = OFF I = ON

5. Turn the motor on by pressing the

switch to the ‘I’ (ON) position. (Fig. 4)

6. Once you have completed

vacuuming, press the power switch

to the 'O' (OFF) position and unplug

the power cord from the outlet.

7. After use, empty the collection tank,

clean and dry the inside and outside

before storage. (Fig. 5)

IMPORTANT! When vacuuming large

quantities of liquids, do not immerse

the nozzle completely in the liquid;

leave a gap at the tip of the nozzle

opening to allow air inﬂow.

The machine is ﬁtted with a ﬂoat valve

that stops the suction action when the

collection tank reaches its maximum

capacity. You will notice an increase in

motor speed. When this happens, turn

off the machine, disconnect from power

supply, and empty the liquid contents

into a suitable receptacle or drain.

After wet vacuuming, turn the machine

off and remove plug from power supply.

Empty the collection tank and clean

and dry the inside and outside before

storage.

REMEMBER! The foam ﬁlter must be

removed after wet vacuuming and a

reusable cloth ﬁlter must be installed

before dry vacuuming again.

145

2 3

WARNING: Be sure to read, understand and apply all the information in the

Important Safety Instructions section at the beginning of this operator's manual.

Do not vacuum in areas with ﬂammable gases, vapors, or explosive dusts in the

air. Flammable gases or vapors include but are not limited to: lighter ﬂuid,

solvent type cleaners, oil-base paints, gasoline, alcohol, or aerosol sprays.

Explosive dusts include but are not limited to: coal, magnesium, grain, or gun

powder. To reduce the risk of health hazards from vapors or dust, do not

vacuum toxic materials.

WARNING: Before any Wet/Dry vac assembly or disassembly make sure that

the power cord is not plugged into a power outlet.

Operation (continued)

Blower Operation

This Wet/Dry Vac has blowing

capabilities. To use the blower feature

follow the instructions listed below:

1. Verify that the power cord is

disconnected from the outlet. (Fig.1)

2. Make sure the collection tank is

empty before using as a blower.

3. Remove hose from the vacuum port.

4. Insert the large end of the hose into

the blower connection on the back

side of the power head. (Fig. 2)

5. Fit the desired attachment to the

hose. (Fig. 3)

6. Verify that the power switch is in the

‘O’ (OFF) position before plugging

the power cord into the outlet.

(Fig. 4, Fig. 5)

7. Before turning ON the vac, ﬁrmly

hold the loose end of the hose. Turn

the motor on by pressing the switch

to the ‘I’ (ON) position. (Fig. 6)

8. Once you have completed

vacuuming, press the power switch

to the 'O' (OFF) position and unplug

the power cord from the outlet.

(Fig. 7)

WARNING: Always wear safety goggles complying with ANSI Z87.1 (or in

Canada, CSA Z94.3) before using blower.

WARNING: Keep bystanders clear from blowing debris.

WARNING: Wear a dust mask if blowing creates dust that might be inhaled.

2 3

Emptying the Collection Tank

Installing & Cleaning Reusable Cloth Filter

Maintenance

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Disconnect the hose from the

vacuum. (Fig. 2)

3. Undo the clasps and remove the

power head from the collection tank.

(Fig. 3)

4. Clear all dirt or debris from the

collection tank and hose. (Fig. 4)

5. Clean or replace the ﬁlters. (Fig. 5)

6. Check the hose, attachments, and

power cord to verify that they have

not been damaged.

Installing Reusable Cloth Filter

1. Verify that the power cord is

disconnected from the outlet. (Fig. 1)

2. Remove power head and place in

the upside down position.

3. Slide reusable cloth ﬁlter down

over the ﬁlter cage making sure the

whole cage is covered. (Fig. 2 & 3)

4. Replace and lock the power head

onto the collection tank.

Removing and Cleaning Cloth Filter

1. Remove power head and place in

the upside down position.

2. Carefully remove the reusable cloth

ﬁlter from the ﬁlter cage. (Fig. 4)

Clean the ﬁlter by gently tapping or

brushing dirt off. Cleaning should

not be done indoors in living areas.

3. After multiple uses, the ﬁlter can

become dirty with accumulated

dust. Use a mild soap and water

solution to wash reusable cloth ﬁlter

and rinse with clean water. (Fig. 5)

4. Allow the wet ﬁlter to air dry for 24

hours before installing onto the ﬁlter

cage.

NOTICE! The included cloth ﬁlter is to

be used for dry pick-up only. A dry ﬁlter

is necessary to pick up dust. If the dust

ﬁlter is wet, it will clog quickly and be

very difﬁcult to clean. Handle the ﬁlter

carefully when removing it for cleaning

and replacing it. Check the ﬁlters for

tears or small holes; a small hole can

let dust pass through and out of the

cleaner. Do not use a ﬁlter with holes or

tears; replace it immediately.

4 5

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Staubsauger Handbücher

Craftsman

Craftsman 113.169270 Bedienungsanleitung

Craftsman

Craftsman 973.114090 Bedienungsanleitung

Craftsman

Craftsman 113.177311 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJC507P Bedienungsanleitung

Craftsman

Craftsman 125.12001 Bedienungsanleitung

Craftsman

Craftsman 113.177720 Bedienungsanleitung

Craftsman

Craftsman 125.17608 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176060 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVFB511 Bedienungsanleitung

Craftsman

Craftsman 125.38909 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJF910 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE176780 Bedienungsanleitung

Craftsman

Craftsman 113.170660 Bedienungsanleitung

Craftsman

Craftsman Craftsman 113.177035 Bedienungsanleitung

Craftsman

Craftsman 113.177846 Bedienungsanleitung

Craftsman

Craftsman 113.177600 Bedienungsanleitung

Craftsman

Craftsman 113.177145 Bedienungsanleitung

Craftsman

Craftsman 113.177480 Bedienungsanleitung

Craftsman

Craftsman 125.16819 Bedienungsanleitung

Craftsman

Craftsman 32724611 - 12 Gal. HP Wet/Dry Vac Bedienungsanleitung

Craftsman

Craftsman 113.170200 Bedienungsanleitung

Craftsman

Craftsman 113.177320 Bedienungsanleitung

Craftsman

Craftsman CMXEVBCV945L Bedienungsanleitung

Craftsman

Craftsman 315.115710 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung