CrimeStopper Pro Start LCPRO-3 Bedienungsanleitung

LCPRO-3and LCPRO-4

LOW CURRENT

REMOTE START SYSTEM

OPERATINGINSTRUCTIONS

CONGRATULATIONSonyourchoiceofaPROStart™RemoteEngineStarterandKeylessEntrybyCrimestopper

SecurityProductsInc. Thissystemisdesigned toworkon newvehicleswithaCanbuscomputer system.Ithasa

DataPortfor bothSmartPhone interfaceand aBypass moduletointerfacewiththe vehiclecomputer.These

modulesare not included; consult your dealer for availability.Thisbookletcontainsthe information necessaryfor

operating your system. If anyquestionsarise,contactyour installation dealer or Crimestopper SecurityProducts

Inc.

*IMPORTANTINFORMATION:Primaryand Optional Features

-PRIMARY: Theseare featuresthatmustbe connected inorder for the systemtooperateproperlyi.e. Remote

Start connections, Flashing lights, and BrakeReset. For programming, the programbutton isrequired.

-OPTIONAL: Thesefeaturesaretobeconnectedonlyifdesiredor agreed upon bythe customer andtheinstalling

dealer i.e.Door Locks,TrunkPop,DomeLightIllumination,Horn-Honk,Anti-Grind,etc.Thesefeaturesmayalso

require additionalpartsand/or labor fees.Consultwithyour installer beforehand tobe sure ofwhatisgoing tobe

installed withyour particular system.

CRIMESTOPPERSECURITYPRODUCTS, INC.

1770 S. TAPO STREET, SIMIVALLEY, CA. 93063

REV A07-2014

ThisdevicecomplieswithFCC Rulespart15.Operation is

subjecttothe following twoconditions: 1)Thisdevicemaynot

causeinterference,and (2)thisdevicemustacceptany

interferencethatmaybe received,including interferencethat

maycauseundesired operation.The manufacturerisnot

responsibleforanyradioorTVinterferencecaused by

unauthorized modification tothisequipment. Suchmodification

couldvoidthe user'sauthoritytooperatethe equipment.

TABLEOF CONTENTS

Operation Cautions&Warnings…….……………..….…………………………………….…………….….…………2

Using the RemoteTransmitter………………………………………………………………………….………....…….3

StatusLED……………………………………………………………………………………………….……….……….4

RemoteEngine Control…………….…..……………………………………………………………….…….……….4-7

Turbo Timer Mode……………………………….……………………………………...……………….…………….…8

ManualTransmission Mode……………………………….……………………………………...…………………..…9

Convenienceand SafetyFeatures……………………………….………………………………….…...……….…9-11

Transmitter Programming….…………….…………………………………………….……………….…………....…12

2VehicleOperation (BLUEorREDLED)….......….………………...…………………………………….…………13

NoFactoryKeyless Entryafter RemoteStart…………..…………………………………………………………….14

RemoteStart Diagnostics……………………………………………………………………………………………….14

BatteryReplacement.…………………………………….………………...……………………..…………….………15

2-WayDataPort…………………………………………………………………………………………………………16

OPERATIONCAUTIONS&WARNINGS

CRIMESTOPPERSECURITYPRODUCTS,INC. and its VENDORS shall notbe liablefor anyaccidentresulting

fromthe useofthisequipment. Thissystemisdesigned tobe professionallyinstalled intoacarorvehicleinwhich

all items,suchasparking brakeand all associated components,door switches,transmission shift linkage,throttle

linkage, and all engine safetyfeatures, are inperfect working condition.

ITISABSOLUTELYTHEOWNER’SSOLERESPONSIBILITYTO: A)Understand the operation ofthissystem

and itssafetyfeatures.B)Check for proper operation ofthe systemprior toaccepting deliveryofthe vehiclefrom

the installation facility.C)Check and maintainthe condition ofthe vehicleand all itemsrelativetothe proper

operation ofthissystemand itssafetyfeatures.D)Always leavethe doorsand windowsclosed and locked to

protect against accidentsand theft.

DONOTremote startthevehicleinaclosedgarage. Makesure thatthe garage door isopen or there is

adequateventilation.Failure toobservethisrulecouldresultininjuryordeath frompoisonousCarbonMonoxide

fumes.

USINGTHEREMOTETRANSMITTER

VEH

LCPRO-3LCPRO-4

NOTE:TheVEHbutton canbeusedtokeepremote control fromaccidentallyoperating yourvehicle.

See Page 13 for additionalinformation on howtouseyour remotetooperateasecond vehicle

ForLCPRO-3

The transmitter supplied withthissystemhas4verticalbuttons–Lock, Unlock, VehicleSelect and Start.

ForLCPRO-4

The transmitter supplied withthissystemhas5verticalbuttons–Lock, Unlock, TrunkRelease, VehicleSelect

and Start. Thisremotecan controlup to4AUXfunctionsthru datadepending on the vehicleand datamodule.

Thisistypicallyused for operating left and right sliding doorsand GasCap release. Consult your installer.

VEH1=BlueLED

VEH2=Red LED

AUXOutputsthru Data

(LCPRO-4 only)

AUX1=Trunk+Lock

AUX2=Trunk+Unlock

AUX3=Trunk+Start

AUX4=Lock +Start

(Requires CanbusData Module)

STATUSLED

STATUSLED:UsedforRemote StartDiagnostics –page14 (Optional, requires Installation ofLED)

LEDwill flashwhen locking your doorswithremote.

LEDwill remainsolidinValet ServiceMode.

REMOTEENGINECONTROL

REMOTESTART&TRUNK POP–Button Press Selection (Option #6):

Toeliminatethe possibilityofaccidentallyopening the trunkor starting the vehicle,there are (3) optionsfor button

press selection.Thisoption will allowyou tochange whether the Remotestarter and Trunkreleaseactivatebya:

1.Doublebutton -Twopresses.

2.*Single½second press (Default).

3.Press and Hold2seconds.

*Default=1singlepress*

REMOTEENGINESTARTING –SUCCESSFULSTART:

1) Press the remotestartbutton for atleast½second (*default).Parking lightsflashonce,return solid,and the

Ignition/Acc circuitsturn on.

2) After afewsecondsthe Starter Motor engages.The parking lightsand Acc circuitswill turn off whilecranking.

3) Engine Startsand Runs. Parking Lightsand ACC turnsbackon, and the doorslock.

4) Engine will remainrunning for programmed run timeuntil resetwithBrakepedal.Ifneeded,the engine can be

turned off withremotetransmitter bypressing and releasing the Start button.

AFTER

IGN

STARTER

THEN

FLASH1X

SOLID

SEC.

PRESS START

REMOTEENGINECONTROL

REMOTEENGINESTARTING –UNSUCCESSFULSTART

Inthe eventthatthe engine doesnotstarton the firstattempt, the systemshutsdownfor afewseconds,then

attemptstorestartthe engine a2nd and 3rd time.Forhardstartingengines,theunitwill allowastarter cranktimeof

upto4secondsmaximum.Thisshouldprovideamplecrankingtimefordifficultstarts,butislimitedto4secondsto

helpprevent damage tothe starter fromover cranking.

1) If engine startson 2nd or 3rd attempt, see steps3&4of “SuccessfulStart”on page 4.

2) IfThird attemptfailstostartengine,the systemwill turn off and doorswill remainlocked.NOFURTHER

ATTEMPTSWILL BE MADEAUTOMATICALLY

TURNING OFF AREMOTESTARTEDENGINE:

1) Engine isrunning inRemoteStart (Parking lightsON).

2) Press and releasethe remotestart button or doublepress (If option #6 ison).

3) Engine &parking lightsOFF, Doorsre-lock/re-arm(programmable).

ENTERING YOUR REMOTESTARTEDVEHICLE:

1) Withengine running, unlocksystemwithremote(If equipped) or open door withkey.

2) Enter vehicleand be carefulnot tostep on brakepedal!(RemoteStart Reset)

3) Turn Ignition toON/RUN position, then press brakepedaltoreset the RemoteStarter &Shift out of park.

4) Remotestarter will resetinstantlywhen the brakeispressed.Parking lightswill turn off and the ignition keyis

nowcontrolling your vehicle.

REMOTESTART RUN TIMERESET:

The RemoteStart Run Timeisadjustablefrom5to30 minutes(option #20). Somelocalcities

havearun timelimit for unattended vehicle. You can nowreset the engine-run timer toallowfor more running

timeafter remotestart hasalreadyoccurred using the remotecontrol. After asuccessfulremotestart, press

boththe Lock&Unlockbuttonstogether for at least 2seconds. The parking lightswill flash3timesand

internalengine timer will reset backtozero minutes.

LOCK withREMOTESTARTand AfterREMOTESTARTABORT:

Option#8controlswhetherthesystemwillautomaticallylockduring and after aremoteStartabortortime-out.This

feature can be turned OFF. The default isLockwithRemoteStart.

REMOTEENGINECONTROL

IDLEDOWNMODE:

Thismodeallowstheunittotakeoveroperationofthe parked vehiclewhilethe ignition keyisremoved andyouexit

the vehicle.The vehiclewill remainrunning for the programmedtimeoruntilcanceled.TheRun Timechoicesare:

10, 20, 30 minutesor InfinityRun. Default=20 minutes

Examples:

•You pull up toaconveniencestore for aquick stop,“IdleDown”mode keepsengine running when you exitthe

vehicle,(withkeysinhand)remotelockdoors.Whenyou return,unlock,turn ignition ONanddriveaway.NOTE:

If lock button ispressed twicein“IdleDown”mode, the remotestart will abort.

IDLEDOWNMODE–EXITING THEVEHICLE:

1) Withvehicleengine running withkey, press the RemoteStart button for at least one second or twiceif set for

Doublepress.

2) Parking Lightswill turn ON.

3) Doorswill unlock, or if brakepedalisbeing depressed, doorswill unlockwhen it isreleased.

4) Turn OFF Ignition and removekey. Engine shouldremainrunning.

5) Exit vehicleand remotelockdoorsif desired. Locking doorsa2nd timeabortsremotestart.

6) Engine will remainrunning for programmed run timeor until you return (whichever comesfirst).

IGN

SOLID

OFF

UNLOCK

PRESS START

IDLEDOWNINFINITYRUN MODE:

IdleDowncanbeprogrammedforINFINITYRUN.Thisallowsthe vehicleengine toremainrunningINDEFINITELY

withouttheignitionkeyintheswitch.The parking lightscontinuouslyflashinthismode.Thismodecanbebeneficial

tolawenforcement or commercialtrucksthat need toremainrunning unattended for long periodsof time.

REMOTEENGINECONTROL

SELECTABLEHOURLYCOLD-STARTMODE(1-4 HOURS)

Thismode allowsthe vehicletobe programmed toself-startevery1,2,3or 4hoursand run for the programmed

run time. Thiscan be helpfulduring extremelycoldconditionswhere engine fluidfreeze-up isaconcern.

TIMEDSELF-STARTMODE–Exiting theVehicle:

1) Engine shouldbe running withthe Key.Press the RemoteStartbutton for atleast1second.Lightswill turn on

signaling the remotestart hasturned on and doorswill unlock.

2) Within10 secondspress and releasethe valet/programbutton oncefor eachhourlyincrement(1 time=1hour,

2X=2hours, 3X=every3hours, 4X=every4hours).

3) Parking Lightswill turn ONwhen the button ispressed and flashoncefor eachconsecutivebutton press.

4) Turn Ignition switchOFF, removekeyand exit the vehicle. Engine shouldremainrunning.

5) Onceoutside the vehicle,press and releasethe remotestartbutton toturn off engine.The parking lightswill

flashthe number of timesindicating the hourlyincrement for confirmation. The vehiclewill startbyitselfatthe

selected hourlyincrement until driven withkeyor started viathe remotecontrol.

IGN

SOLID

OFF

UNLOCK

PRESS1 -4X

WITHIN 10 SEC.

LIGHTSFLASH

foreachpress

ENGINETURNSOFF

FLASHHourIncrement

RESETTING TIMEDSELF-STARTMODE:

Toreset the timed self-start mode, start vehicleusing the ignition keyor the remotecontrol.

TURBOTIMERMODE(Option 22)

The optionalTurbo Timer mode allowsthe ProStart systemtokeep aTurbo or Turbo Dieselvehiclerunning for

1, 3or 5minutes[selectively] after you removethe keyand exit the vehicle. Thisishandyfor turbo cool-down

without the need for expensiveturbo timers. The Default=OFF.

To Activate Turbo Timer:

Withthe engine running bykey, press Remote StartButton withbrake pedal depressed. Asyou releasethe

brakepedal, the Parking Lightsand StatusLEDwill blinkthe number of minutesfor the Turbo Timer setting.

The doorsunlockafter confirmation.

REMOVE KEY

FLASH 1-5X

EXIT VEH.

PRESS

AND HOLD

BRAKE

RUNNING RELEASE

BRAKE

LIGHTS

RUNNING

REMAIN

1-5 MIN.

PRESSSTART

MANUAL TRANSMISSIONMODE(Option 11)

MANUALTRANSMISSIONEXITPROCEDURE(Option #11-1, 11-3 &11-4)

ThissystemfeaturesaManualTransmission Mode. When exiting the vehicle, there issafetycheckout

procedure required for the manualtransmission mode towork. There are 3choicesof operation,

1. Option 11-1: Withengine running and vehicleinneutral,setparking brake,then press “KEY” Icon on

transmitter.The remotestarter will turn on and takeover operation ofthe vehicle.Press lockbutton after

closing last door tofinishexit procedure (sameassteps a, b, cand d below).

2. Option 11-3: Withenginerunningandvehicleinneutral,setparkingbrake,the remotestarterwillturnonand

takeover operation of the vehicle.

a. Removekey,exitvehicle(remotestarter unitmust“SEE”door opened,then closed withengine

running).

b. Press Lockbutton within10 secondsofclosing door to“ArmwithIdleDown” (engine staysrunning).

Press Locka2nd timetocancel“IdleDown” (engine turnsoff)and setup ManualTransmission Mode.

c. PressLockbuttonafter10secondstoArmsystem,lockthe doorsand shutdownthe engine.Fromthis

point, you can will remotestart the engine unless adoor isopened.

d. Press the RemoteStartButton after closing door tosetupManualTransmissionModewithoutArming

AlarmSystem.

3.Option 11-4: Withenginerunningandvehicleinneutral,setparkingbrake,the remotestarterwillturnonand

takeover operation ofthe vehicle.RemoveKeyand exitvehicle.When the lastdoor ofvehicleisclosed,the

engine will turn off in2secondsand setup ManualTransmission Mode. You can armthe alarmsystemto

lockdoorsand protect vehicle.

TURBO TIMERinManual Transmission Mode:

ForTurboTimer,pressbrakepedalbeforesetting parking brake,then press the RemoteStartIcon(requiresTurbo

Timer Option #22).After exiting vehicle,press lockbutton tosetManualTransmission Mode.The engine will

remainrunning for the Turbo Timer setting (1, 3or 5minutes).

REMOTEPANIC(Optional)

The Pro StartsystemfeaturesRemotePanicthru Data.Consultyour installer on thisfeature.ToactivatePanic

Mode,presstheLockButtononthe remotefor more than 2seconds.The vehiclehornwillhonkalongwithflashing

parking lampsfor 1minute. Reset RemotePanicbypressing either the lockor unlockbutton.

CONVENIENCEAND SAFETYFEATURES

KEYLESS ENTRY(PowerDoorLocks, mayrequireData Module-Optional)

Thissystemenablesyou toremotelylockand unlockthe vehicle’sdoors(ifequipped withpower locks)viaremote

controlfor safetyand convenience.Note:Thisfeature mayrequire extra labor and/or partstoinstall.Press the

LockorUnlocktransmitterbuttonasyouleaveor comenear the vehicle.Parking lightswill flashonceforLockand

twicefor Unlock.The parking lightswill turn on for 30 secondswithUnlocktoassistinlocating and providing

illuminationnearyourvehiclewhenapproaching atnightfor safety.The parking lightalsoturnsoffwithignitionon.If

vehicleisrunning bythe remotestart system, the lightswill flash, but return backtosolid.

AUTO LOCK / UNLOCK (Option #2)

TheAutoLockfeaturecontrolswhetherthedoorswill automaticallylock/unlockon your vehiclewhendrivingorwith

turning the Ignition ON/OFF.Ifthe AutoLockfeature isturned on,and your systemisin“Tach” mode,then the

doorsshouldautomaticallylockasthe engine RPM’sincrease(driving).Ifthe AutoLockfeature isturned on,and

your systemisin“SmartTachless”mode,then the doorswill lockafewsecondsafter the Ignition isturned on.

When the AutoLockfeature isturned on, the systemwill alwaysunlockthe doorswhen the Ignition isturned off.

Withthisfeature turned OFF,the systemwill notautomaticallylockor unlockthe vehicle.See your installer for

programming information on thisfeature.

HORN CHIRPS

The Pro Start systemfeatureshorn honkconfirmation thru datawithlock, unlockand remotestart. Not all

databusmodulessupport thisfeature. Consult your installer on thisfeature. Somevehicle’sfeature horn honk

withlockand unlockusing the factoryremote. Most databusmoduleswill followthe factorysetting. Tochange

the horn honksmayrequire changing the factorykeyless entrysettings(checkyour vehicleownersmanual).

REMOTETRUNK RELEASE ORDOMELIGHTILLUMINATION(Option 9)

ThisPro Startsystemincludesan outputthatcan be programmed toremotelyreleaseafactoryelectronictrunkor

illuminatethe interior lightwhen you unlockyour vehiclefor lighted entryatnight. Ifyou havethe optionaltrunk

releaseinstalled, simplypress and releasethe TrunkButton #3 on the transmitter toremotelyopen trunk.Ifyour

systemisprogrammed for DomeLightillumination,then itwill workautomaticallylighting the domelightfor 30

secondswhen you unlockyour vehicleviathe remote.The domelightwill turn off after 30 seconds,or turning the

keyon (whichever comesfirst).The trunkPop or DomeLightIllumination mayrequire extra labor and/or partsto

install.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CrimeStopper Fernstartsystem Handbücher

CrimeStopper

CrimeStopper RS-800.III Bedienungsanleitung

CrimeStopper

CrimeStopper RS1-G4 Cool Start Bedienungsanleitung

CrimeStopper

CrimeStopper CoolStart RS900ER Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-90 Bedienungsanleitung

CrimeStopper

CrimeStopper cool start RS2-G3 Bedienungsanleitung

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE Start EZ-45DP Bedienungsanleitung

CrimeStopper

CrimeStopper RS-999TW1/TW2 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2016DPII-FM Informer II Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS7-G5 FM Bedienungsanleitung

CrimeStopper

CrimeStopper CS-9704 Bedienungsanleitung

CrimeStopper

CrimeStopper EZ-45DP/55DP Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-850 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-30DP Bedienungsanleitung

CrimeStopper

CrimeStopper Infinity CS-2900DP-FM Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.IV Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE START EZ-10 Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.III Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-64TW1 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-00 Bedienungsanleitung

CrimeStopper

CrimeStopper EZEE Start EZ-45DP Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8050 Handbuch

CrimeStopper

CrimeStopper RS-800.IV Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch