CrimeStopper CoolStart RS800 Series II Bedienungsanleitung

RS800 Series II

Remote Engine Starting System

OPERATING INSTRUCTIONS

CONGRATULATIONSonyourchoice ofa CoolStart™ Remote Engine Starter by Crimestopper Security Products

Inc. This booklet contains the information necessary for using & maintaining your remote start system. If any

questions arise, contact your installation dealer or Crimestopper Security Products Inc. at (800) 998-6880.

OPERATION CAUTIONS & WARNINGS

CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this

equipment. This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all

associated components, door switches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect

working condition.

DO NOT install this Remote Engine Starting System on MANUAL TRANSMISSION vehicles. If accidentally left in gear the

vehicle could become a self-propelled threat to life and property.

IT IS ABSOLUTELY THE OWNER’S SOLE RESPONSIBILITY TO: A) Understand the operation of this system and its safety

features. B) Check for proper operation of these safety features prior to accepting delivery of the vehicle from the installation facility.

C) Check and maintain the condition of the vehicle and all items relative to the proper operation of this system and its safety features.

D) Always leave the doors and windows closed and locked to protect against accident and theft.

DO NOT remote start the vehicle in a closed garage. Make sure that the garage door is open or there is adequate ventilation.

Failure to observe this rule could result in injury or death from poisonous Carbon Monoxide fumes.

IT IS ABSOLUTELY THE OWNERS SOLE RESPONSIBILITY TO: make certain the vehicle PARKING BRAKE is properly adjusted

and will hold the vehicle securely in all parking conditions, and to periodically check and maintain proper adjustment.

REV. A 09.10.01

This device complies with FCC Rules part 15. Operation is

subject to the following two

conditions: 1) This device may not cause interference, and (2) this device must accept

any interference that may be received, including interference that may cause

undesired operation. The manufacturer is not responsible for

any radio or TV

interference caused by unauthorized modification to this equipment. Such modification

could void the user's authority to operate the equipment.

OPERATING THE REMOTE TRANSMITTER

The transmitter supplied with this RS800 system has (2) buttons / channels.

#1 #2

START

LOCK/ REMOTE

START

UNLOCK

RIME

TOPPER

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING -SUCCESSFUL START:

1) Press and release the remote start button.

2) Parking lights flash once, then turn ON along with the IGN/ACC circuits

3) After 6 seconds Starter Motor engages. (Parking lights and Acc circuits turn off while cranking.)

4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.

5) Enginewill remainrunning forprogrammed runtime or untilresetwith Brakepedal. Ifneeded,the enginecanbe

turned off with remote transmitter or for RS801 model, activating the Green Start input wire again.

AFTER

IGN

STARTER

THEN

FLASH 1X

SOLID

SEC.

START

NOTE:

When using the optional

Starter Disable feature without

power door locks, be certain to

install the supplied L.E.D. which

will be your only

indication that

the Starter Disable is active. You

must press the UNLOCK button on

the transmitter if the L.E.D. is

flashing or the vehicle will not

start.

REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING -UNSUCCESSFUL START

In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then

attempts to restart the engine a 2nd and 3rd time. Forhard starting engines,the unit willallow astarter crank timeof

upto13 secondsmaximum. This shouldprovide amplecrankingtime fordifficult starts,butis limitedto13 seconds

to help prevent damage to the starter from over cranking in the case of a malfunctioning unit.

1) If engine starts on 2nd or 3rd attempt, see steps 4 & 5 above of "Successful Start".

2) If Third attempt fails to start engine, the system will turn off and doors will remain locked. NO FURTHER

ATTEMPTS WILL BE MADE AUTOMATICALLY

TURNING OFF A REMOTE STARTED ENGINE:

1) Engine is running in Remote Start (Parking lights are ON).

2) Press and release the Remote Start button again.

3) Engine turns & parking lights OFF, Doors remain locked or will re-lock/re-arm if applicable.

CONVENIENCE AND SAFETY FEATURES

KEYLESS ENTRY (POWER DOOR LOCK CONTROL)

Thissystem enablesyou toremotely lockand unlockthe vehicle’s doors (if equipped with power locks) through the

transmitter for safety and convenience. This feature may require extra labor and/or parts to install.

REMOTE LOCK / UNLOCK

Press the Lock/Unlock button on the transmitter as you leave or come near the vehicle. Parking lights will flash

once for lock and twice for unlock. If vehicle is remote started, engine will remain running and lights will flash but

return to solid indicating engine is still being controlled by the remote starter.

NOTES: Doors lock automatically when vehicle is Remote Started. Starter Disable/Anti-grind is also

enabled/disabledwith thelock/unlock button. Ifan anti-grind/starterkill relayis installedon a vehiclewithout power

door locks, the lock/unlock button of the remote control must still be used to operate the Starter disable.

VALET MODE / STARTER DISABLE OVERRIDE

Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet mode.

The remote start function WILL NOT operate when in Valet mode. To enter Valet mode, turn the key to the ON

position, press and hold Program/Valet switch for 6 seconds. The LED will turn on solid and the system is now in

valet. Performthis procedureagain toexit ofValet mode. Thekeyless entrywillstill functionnormally whileinvalet

mode. In the event of a lost or broken transmitter, perform this step to override the Starter Disable (If installed).

CONVENIENCE AND SAFETY FEATURES

HOOD OPEN SAFETY SWITCH

Prevents the engine being Remote Started when hood is open and will abort a remote start if running. Eliminates

risk of injury to someone working under the hood of the vehicle. If a remote start is requested with the hood open,

the lights will flash twice, Ignition will not turn on, and the unit will not attempt a start.

BRAKE PEDAL RESET CIRCUITRY

Preventsstarting orshuts off aremote startedvehicle whenthiscircuit isactive oractivated. Preventsunauthorized

tampering. Thiscircuit shutsthe systemdown immediatelywhen brake pedal is pressed if key is not in ignition and

turned to the run position.

ANTI-GRIND / STARTER DISABLE

Prevents the driver from accidentally grinding the starter if the Ignition key is turned too far (to the start position)

while engine is already running from the remote starter. Starter circuit is automatically disabled when doors are

locked using the remote as an added security feature.

NOTE:

Inthe eventof amajor malfunction,performing electricalservice orjumpstarting thevehicle youshould removethe

main Power Fuse(s) to protect the unit from possible damage.

TRANSMITTER PROGRAMMING

TRANSMITTER PROGRAMMING:

Note: All transmitter codes must be learned at time of programming!! The RS800 allows storage of up to 4

different transmitter codes.

1. Open Hood (Ground Gray hood pin wire if no hood pin is installed).

2. Turn key to the ON position.

3. Press Programming button 4 times. After a few seconds, the unit will flash the parking lights 4 times.

4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a

2nd code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3rd

codeand 4flashes forthe 4th code. Ifall 4codes arelearned, theunit willautomatically exitcodelearning mode,

otherwise turn key off and close hood.

CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063

Inhaltsverzeichnis

Andere CrimeStopper Fernstartsystem Handbücher

CrimeStopper

CrimeStopper RSX-G6 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1300DP Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-7 Bedienungsanleitung

CrimeStopper

CrimeStopper RS-901.III Bedienungsanleitung

CrimeStopper

CrimeStopper CS-9704 Bedienungsanleitung

CrimeStopper

CrimeStopper Pro Start LCPRO-3 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-3 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-90 Bedienungsanleitung

CrimeStopper

CrimeStopper SP-400 Systemhandbuch

CrimeStopper

CrimeStopper Cool Start RS7-G5 FM Bedienungsanleitung

CrimeStopper

CrimeStopper CS-845RKE Series II Handbuch

CrimeStopper

CrimeStopper RS700 IIIER Bedienungsanleitung

CrimeStopper

CrimeStopper RS-800.IV Bedienungsanleitung

CrimeStopper

CrimeStopper COOLSTART RS-830 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-840 Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-64TW1 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1405DP Bedienungsanleitung

CrimeStopper

CrimeStopper Ezee Start EZ-777 FM Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8050 Handbuch

CrimeStopper

CrimeStopper CS-870RKE Bedienungsanleitung

CrimeStopper

CrimeStopper RS900/RS901 Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-1300DP Bedienungsanleitung

CrimeStopper

CrimeStopper Cool Start RS-7 Bedienungsanleitung

CrimeStopper

CrimeStopper CoolStart RS900ER Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

Rooboost

Rooboost RB-1750WP Bedienungsanleitung

Schumacher

Schumacher INSTANT POWER IP-75C Bedienungsanleitung