Crosswater LIBRA LB6117C Series Bedienungsanleitung

LIBRA

IMPORTANT INFORMATION BEFORE YOU START

Please read carefully and keep this information for further reference.

Sanitaryware

PRODUCT CODES:

LB6117Cx - 35kg

LB6115Cx - 25kg

LB6105Cx - 2.5kg

Thank you for buying a Crosswater Product. To ensure that it

works to its full potential, it needs to be tted correctly.

Check the contents of the pack carefully before installation.

Crosswater will not be held responsible for any de-t/re-t

costs where faulty product has been tted. If any fault is

found with materials or workmanship, it must be reported

immediately to the manufacturer. Remedial action will be

taken, based on information received, on condition that:

1. Full details are supplied to the manufacturer.

2. The product has not been modied or tampered with;

3. The manufacturer is informed of any damage/shortages

prior to installation.

4. The product has not been installed, or attempts have been

made to install.

We do not accept responsibility for any problems that may

occur through incorrect installation. This product should

only be installed by a suitably qualied plumber/installer.

Should the installation be completed by a non-qualied

person any product guarantee maybe considered invalid. For

a claim made under our warranty, written certication of your

installer’s qualications may be required.

V1.05.2023

IMPORTANT INFORMATION

Please read carefully and keep this information for further reference.

Please check for any hidden pipes or electrical cables before drilling holes in the oor or walls. When using power tools always

follow the manufacturer’s user instructions. This installation guide details tting to a solid wall. If your bathroom has studded/

plasterboard walls, please use appropriate plasterboard xings.

Make sure that the wall can take the weight of the products before undertaking the installation.

Fittings, when over tightened can create stress within the basin material which may in time cause the failure of the product.

Care should also be taken when tting a tap and waste to the basin in order to prevent similar stress related failures. Waste

ttings should be carefully bedded in silicone and the back nut hand tightened; an additional quarter turn using a suitable

spanner is suicient to create the required watertight seal.

If any maintenance is required then it must be carried out by a qualied Plumber. The manufacturer reserves the right to make

technical modications without prior notice.

Drill + 8mm Drill Bit Pencil

Screw Driver

Tape Measure

Spirit Level

Adjustable Spanner

Safety Goggles

Tools Required (not supplied):

Water Based

Silicone Sealant

180mm

A-5mm

INSTALLATION - WALL HUNG

3 4

Follow the manufacturer’s instructions for the installation

of the concealed cistern selected, ensuring the xing points

match the width of the wall hung toilet.

Measure distance A and reduce the depth of the bullets by

5mm to ensure a tight grip against the wall surface. Make sure

the bullet xings are facing up.

Push the inlet as far as possible into the toilet and mark the

distance on the pipe. Measurement A.

Then push the inlet into the concealed cistern as far as

possible and mark the distance on the pipe. Measurement B.

Measure the distance between both marks. Measurement C.

Finally, cut measurement C o the end of the inlet pipe before

securing the toilet to the wall. Follow the manufacturer’s

guidelines for applying grease to the seals

Place the toilet upside down and assemble the xing kit

on the toilet installation holes ensuring a tight t. The grub

screws should be facing up, so they can be accessed through

the toilet seat holes.

Place the toilet on the xings.

Secure the toilet to the concealed cistern and wall by

tightening the grub screws to the bullet xings.

Apply a exible sealant around the top and rear of the toilet

as shown, leave to dry for 24 hours before use.

INSTALLATION - BACK TO WALL

Follow the manufacturer’s instructions for the installation of

the concealed cistern selected, ensuring the inlet and outlet

wastes match the measurements of the back to wall toilet.

Oer the toilet to its position and mark the location of the

side holes on the oor. Then remove the toilet and measure

the thickness of the ceramic at distance A. Install the toilet

oor xings.

Place the toilet back in position and secure to the oor xings

using the screws, washers and cover caps provided.

Apply a exible sealant around the base and rear of the toilet

as shown, leave to dry for 24 hours before use.

1 2 3

INSTALLATION - TOILET SEAT

Locate the xings on the toilet seat and tighten in the order

shown, using a screw driver. Do not over-tighten at this stage.

Insert the toilet seat into the xings and allow to so-close.

Move the seat into position, ensuring the sides and front are

ush with the toilet.

Once the position of the toilet seat is achieved, carefully

remove the toilet seat by pressing the central release button.

Avoid moving the xings whilst releasing the seat and tighten

the xings using a screw driver and moderate force. The

Cover caps can now be applied before returning the seat to its

position.

Do not force the toilet seat shut as this may damage the so-

close mechanism over time. Do not stand on the seat. When

cleaning the toilet, always leave the toilet seat open to allow

chemical gases to release. Do not leave harsh chemicals in the

toilet bowl with the seat lid closed.

Part of the

Bathroom Brands Group

Lake View House

Rennie Drive, Dartford

Kent DA1 5FU

United Kingdom

0345 873 8840

www.crosswater.co.uk

We reserve the right to make technical modications without prior notice.

Clean regularly using with warm soapy water and polish with only a so cloth.

Any residues from soap, toiletries etc. should be rinsed o straight aer use.

Household bleaches and cleaners containing harsh chemicals may damage the surface nish.

Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.

Lime-scale marks can be cleaned using a diluted lime-scale remover used in accordance with manufacturers instructions.

CARE & MAINTENANCE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Crosswater Sanitärprodukte Handbücher

Crosswater

Crosswater Belgravia US-BL422 Bedienungsanleitung

Crosswater

Crosswater Smith Basin 24 Top SMI-BT24-WH Bedienungsanleitung

Crosswater

Crosswater KL322DC Bedienungsanleitung

Crosswater

Crosswater KWC DOMO 10.061.033.000 Kurzanleitung

Crosswater

Crosswater Darby 15-15P-T Bedienungsanleitung

Crosswater

Crosswater 28-07 Bedienungsanleitung

Crosswater

Crosswater Belgravia US-BL440 Bedienungsanleitung

Crosswater

Crosswater BTW0241C Bedienungsanleitung

Crosswater

Crosswater Darby 15-16-T Bedienungsanleitung

Crosswater

Crosswater Belgravia US-BL130 Bedienungsanleitung

Crosswater

Crosswater Taos 17-19-T Bedienungsanleitung

Crosswater

Crosswater Taos Deck-mount Tub Faucet with Handshower Trim... Bedienungsanleitung

Crosswater

Crosswater Solo Produkthandbuch

Crosswater

Crosswater Berea 11-01 Bedienungsanleitung

Crosswater

Crosswater Berea 11-19-T Bedienungsanleitung

Crosswater

Crosswater Waldorf US-WF0613 Bedienungsanleitung

Crosswater

Crosswater Arcade US-ARC15 Bedienungsanleitung

Crosswater

Crosswater US-ARC953 Bedienungsanleitung

Crosswater

Crosswater Waldorf US-WF130 Bedienungsanleitung

Crosswater

Crosswater US-BSW0101 Bedienungsanleitung

Crosswater

Crosswater UNION US-UN800 Bedienungsanleitung

Crosswater

Crosswater Classic Console Series Bedienungsanleitung

Crosswater

Crosswater Fenmore 28-20-T Bedienungsanleitung

Crosswater

Crosswater Berea 11-02-T Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema