CYP AU-A300 Bedienungsanleitung
AU-A300
Integrated 2 Channel Zone Amplier
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 09/05/13 First release
CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel ................................................... 8
6.2 Rear Panel ..................................................... 9
7. Remote Control ................................... 10
7.1 RS-232 Protocols ......................................11
7.2 RS-232/Telnet Commands ....................12
8. Connection Diagram .......................... 13
9. Specications ...................................... 14
10. Acronyms .......................................... 15
6
1. INTRODUCTION
The AU-A300 is a compact 2 channel amplier that is perfect for matrix
zone amplication or corporate/educational presentations. This solution
provides a exible and versatile input/output structure, enabling a wide
range of sources and systems to integrate with the product. It also boasts
some unique features including a bespoke HDMI pathway with audio
embedding and an analogue line output that can either be xed or
variable level. With these and other more common features it's an ideal
amplier for many dierent installation scenarios.
2. APPLICATIONS
Matrix Zone Audio Routing and Amplication
Corporate events
Educational Presentation
Stereo Ceiling Speaker Systems
Analogue to Digital and Digital to Analogue Conversion
HDMI Audio Embedding and de-embedding
3. PACKAGE CONTENTS
1× Integrated Zone Amplier
1× IR Receiver
1× Remote Control CR-126
1× 24V/ 3.75A DC Power Adaptor and Power Cable
Operational Manual
4. SYSTEM REQUIREMENTS
Input a wide variety of audio and HDMI sources such as DAB radios,
HDTVs, Sonos systems, PCs, Set-top Boxes and output to speakers, an
additional AU-A300 or other ampliers.
7
5. FEATURES
30 watts per channel Digital Stereo Amplier
Inputs: 2×HDMI, 1×L/R Analogue Stereo, 1×Optical digital audio,
1×Coaxial digital audio, 1×3.5mm mini-jack, 1×Microphone (XLR)
Outputs: Stereo speaker terminals, 1×HDMI, 1×Optical digital audio,
1×Coaxial digital audio, 1×L/R Analogue Stereo
Control via IR (Remote and IR Receiver input), RS-232 or IP (Telnet)
Dedicated XLR microphone input with independent volume control
Analogue to Digital and Digital to Analogue Conversion
HDMI Audio Embedding and de-embedding
Compact design supplied with wall brackets
Analogue line output selectable to be either xed or variable output
level
Note: Does not support the decoding of Dolby® Digital signals
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PUSH
EXIT POWER
UPDATE
Integrated Zone Amplifier
CONTROL
MIC
Coaxial In -20.0 dB
44.1K -> 44.1K
1 2 3 4 5 6 7
1MIC: Connect to a microphone or a mono balanced source
2UPDATE: Manfacturer use only.
3LCM: Displays current source selection and volume setting.
4IR Window: Accepts the IR signal from the supplied remote control.
5CONTROL: Control and direct volume adjustment. Turn to adjust
volume output or to navigate through the menu system. Volume is
adjustable from 0 dB (maximum) to −80 dB (minimum)
6EXIT: Press this button to exit the menu. When not in the menu press
this button to mute the output, the LED will illuminate in red. Press it
again to unmute.
7POWER: Press this button to turn on the device, the LED will
illuminate in blue to indicate that it is powered. Press it again to switch
to standby mode, the LED will turn red to indicate that it is in standby.
9
6.2 Rear Panel
CONTROL
HDMI OUT HDMI IN 1 HDMI IN 2
RS-232 LINE IN
OUTOPT. COAX.
INOPT. COAX.
R L
OUTR
SPEAKER
RCA
IN DC 24V
IR IN
OUT
IN R LR L
+
-
+
-
1 4 7 129
3 5 6 8 10 11
2
1IP CONTROL: Connect to an active network with RJ-45 cable for telnet
control.
2HDMI OUT: Connect to HDTV/monitor for both audio and video
display.
3IR IN: Connect the IR receiver included in the package for receiving
the IR signal from the device’s remote control.
4HDMI IN 1& 2: Connect to HDMI source equipment such as a Set-top
Box or Blu-ray player.
5RS-232: Connect to a PC/Laptop or control system with D-Sub 15pin
cable for RS-232 control.
6LINE IN: Connect to an audio source with 3.5mm mini-jack cable for
stereo audio signal input.
7OPT. & COAX. OUT: Digital audio output. Connect to additional
ampliers or active speakers.
8OPT. & COAX. IN: Connect to source equipment such as a Set-top-box
or games console with an optical or coaxial digital output.
9R/L SPEAKER: Connect to speakers with standard speaker cable.
10R/L IN: Connect to audio source equipment with an RCA cable for
analogue stereo audio input.
11R/L OUT: Connect L/R output to active speakers or an additional
AU-A300 with an RCA cable for analogue stereo audio output.
12DC 24V: Connect the 24V DC power supply to the unit and plug the
adaptor into an AC outlet.
10
7. REMOTE CONTROL
1POWER:
Press this button to turn the device
On or to set it into standby mode.
2MUTE:
Press this button to mute the audio
output.
3Vol. Up or Down (▲▼):
Press these buttons to turn the
output volume up or down.
4MENU:
Press this button to enter the OSD
MENU then press the ▲&▼ buttons
to select the required option
and press it again to conrm the
selection.
5EXIT:
Press this button to go back one
step or exit from the menu.
6INPUT:
Press these hot keys to switch the required input source directly.
CR-126
MUTE
POWER
VOL.
MENU
EXIT
HDMI 1 HDMI 2
OPTICAL
COAXIAL LINE
LR
INPUT
1
4
6
2
3
5
Andere Handbücher für AU-A300
1
Inhaltsverzeichnis
Andere CYP Verstärker Handbücher
CYP
CYP QU-210S v1.3 Bedienungsanleitung
CYP
CYP QU-210S Bedienungsanleitung
CYP
CYP CMPRO-4H2H Bedienungsanleitung
CYP
CYP PRO-3GSDI14 Bedienungsanleitung
CYP
CYP PU-Q1H8C Bedienungsanleitung
CYP
CYP QU-4M Bedienungsanleitung
CYP
CYP QU-10-4K22 Bedienungsanleitung
CYP
CYP QU-DP13EX Bedienungsanleitung
CYP
CYP QU-14S-4K22 Bedienungsanleitung
CYP
CYP QU-128 Bedienungsanleitung
CYP
CYP CLUX-3D12S1A Bedienungsanleitung
CYP
CYP QU-18S Bedienungsanleitung
CYP
CYP QU-110S-4K22 Installationshandbuch
CYP
CYP QU-12S-4K22 Bedienungsanleitung
CYP
CYP QU-18S Bedienungsanleitung
CYP
CYP QU-16E Bedienungsanleitung
CYP
CYP QU-14S Bedienungsanleitung
CYP
CYP EHD-8 Bedienungsanleitung
CYP
CYP QU-28S-4K22 Bedienungsanleitung
CYP
CYP DCT-23 Bedienungsanleitung
