CYP CPRO-16E Bedienungsanleitung
CPRO-16E
1×16 HDMI Splitter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 27/09/13 Preliminary Release
VS1 24/02/14 Updated Diagram
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel.........................................3
6.2 Rear Panel .........................................3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
9. Acronyms ............................................... 5
1
1. INTRODUCTION
This high performance 1 by 16 HDMI splitter distributes one HDMI input
to up to sixteen simultaneous HDMI outputs and supports 4K×2K, 3D,
12-bit Deep Color as well as High Denition Lossless Audio. With its
3Gbps bandwidth it supports the latest HDMI standards so you can be
sure of superior HDMI distribution.
2. APPLICATIONS
• Simultaneously display one HDMI source on 16 displays
• Showroom display
• University lecture hall display
• Retail sales display
3. PACKAGE CONTENTS
• 1×1 by 16 HDMI Splitter
• 1×5 V/6 A DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI equipped source device such as a DVD/Blu-ray player with
HDMI or DVI to HDMI cable
• HDMI equipped displays (HDTVs or projectors) or AV Receivers with
HDMI cables
2
5. FEATURES
• HDMI and DVI compatible
• Fully HDCP compliant
• Supports 3D
• Supports HDTV resolutions up to 4K×2K@30 Hz
• Supports PC Resolutions of VGA to WUXGA
• Supports 1080p@60 Hz, Deep Color 12-bit
• Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
• Supports HDMI cable distances of up to 10m input and 10m output
(8/12-bit)
Note: When displaying a 3D signal with a higher bandwidth than
225 MHz or a 4K×2K resolution source, a High Speed HDMI cable is
required.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWERSYNC
CPRO-16E 4Kx2K 1x16 SPLITTER
1 2
1
POWER LED: The power LED will illuminate when the unit is powered.
2
SYNC LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
6.2 Rear Panel
DC 5V
SERVICE
2
1
4
3
6
5
8
7
10
9
12
11
14
13 15
STD TV
INPUTOUTPUT
EDID
16
1 2 3 4 5
1
EDID STD/TV: The default factory setting is TV, when in this mode,
the unit will detect the rst HDMI output device's EDID settings and
record them in the unit's memory. If there are any audio or video
issues then switch the unit to STD (Standard) mode and power
cycle it, the unit will be congured as standard stereo (PCM) Audio
and initiate a search for a common compatible video resolution.
2
SERVICE: Manufacturer use only.
3
HDMI INPUT: Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top box.
4
HDMI OUTPUTS (1~16): Connect each of the output ports to an
HDMI display for simultaneous HDMI distribution.
5
DC 5V: Connect the 5V DC power supply into the splitter and Plug
the adaptor to AC wall outlet.
4
7. CONNECTION DIAGRAM
DC 5V
SERVICE
2
1
4
3
6
5
8
7
10
9
12
11
14
13 15
STDTV
INPUT OUTPUT
EDID
16
TVs/Projectors
TVs/Projectors
Power
Supply
Blu-ray Player
HDMI Input
Simultaneous
HDMI Outputs
Simultaneous
HDMI Outputs
5
8. SPECIFICATIONS
Video Bandwidth 340 MHz/10.2 Gbps
Input Port 1×HDMI (Female connector), 1×USB
(Manufacturer use only)
Output Ports 16×HDMI (Female connector)
Output Resolutions 480i~1080p@50/60, 1080p@24/50/60,
VGA~UXGA, Ultra HD (4K×2K@30)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimensions 436 mm (W)×26 mm (D)×48 mm (H)
Weight 1664 g
Chassis Material Metal
Color Black
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 15.8 W
9. ACRONYMS
ACRONYM COMPLETE TERM
4K×2K Ultra HD Resolution (3840×2160)
HDMI High-Denition Multimedia Interface
HDTV High-Denition Television
Andere Handbücher für CPRO-16E
1
Inhaltsverzeichnis
Andere CYP Kabel und Steckverbinder Handbücher
CYP
CYP PU-1H7HBTPL Installationshandbuch
CYP
CYP CLUX-12E Bedienungsanleitung
CYP
CYP CLUX-12CEC Bedienungsanleitung
CYP
CYP CDPS-UA1H10HS Bedienungsanleitung
CYP
CYP CDP-13DPI Bedienungsanleitung
CYP
CYP DCT-28 Bedienungsanleitung
CYP
CYP CMDP-13MDPI Bedienungsanleitung
CYP
CYP CPRO-8ER Bedienungsanleitung
CYP
CYP CLUX-18S Bedienungsanleitung
CYP
CYP CHDBX-1H1CPL Bedienungsanleitung
CYP
CYP CLUX-4M Bedienungsanleitung
CYP
CYP CLUX-18E Bedienungsanleitung
CYP
CYP CDVI-2DDS Bedienungsanleitung
CYP
CYP CLUX-18S Bedienungsanleitung
CYP
CYP CPLUS-V2E Bedienungsanleitung
CYP
CYP CSDI-42 Bedienungsanleitung
CYP
CYP CHDMI-4M Bedienungsanleitung
CYP
CYP CHDBT-1H4CPLV Bedienungsanleitung
CYP
CYP QU-4-4K22 Bedienungsanleitung
CYP
CYP PU-1H7HBTE Bedienungsanleitung
Beliebte Kabel und Steckverbinder Handbücher anderer Marken
BEGA
BEGA 71 085 Bedienungsanleitung
Tesla
Tesla HPWC Bedienungsanleitung
GAMERON
GAMERON LUXURY TV CABLE Bedienungsanleitung
molex
molex Milli-Grid Dual row 87568 Series Bedienungsanleitung
Burndy
Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung
Chauvet DJ
Chauvet DJ Data Stream 8 Bedienungsanleitung