CYP CDVI-2DDS Bedienungsanleitung
CDVI-2DDS/4DDS
Dual-link DVI 1:2/1:4 Splitter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 06/10/11 Preliminary Release
RDV2 15/03/12 Add 4DDS
CONTENTS
1. Introduction................................................... 1
2. Applications.................................................. 1
3. Package Contents ....................................... 1
4. System Requirement .................................... 1
5. Features......................................................... 1
6. Operation Controls And Functions ............. 2
6.1 Front Panel ............................................... 2
6.2 Rear Panel................................................ 3
7. Connection Diagram ................................... 3
8. Specications ............................................... 4
9. Acronyms ...................................................... 5
1
1. INTRODUCTION
The Dual-Link DVI splitter allows a single DVI-D signal to be split into
two/four DVI outputs. Accept both Single-Link and Dual-Link DVI signal
with supporting the highest resolution of WQXGA for Dual-Link and
WUXGA@RB for Single-Link DVI this wonderful device allows users with
a multi-screen viewing.
2. APPLICATIONS
• Commercial advertising, displaying
• Lecture room display
• Showroom display
3. PACKAGE CONTENTS
• Dual-Link DVI Splitter
• 5V/2.6A or 4A DC adaptor
• Operation manual
4. SYSTEM REQUIREMENT
Input source equipments such as PC and output DVI display with DVI
cables.
5. FEATURES
• Supports video resolutions up to WQXGA with Dual-Link DVI or
WUXGA with Single-Link DVI
• Built-in adaptive equalizer provides long cable support
• Support EDID function
• Individual control of hot plug detect
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 5V
POWER
LINK
1
Dual-Link DVI IN
Dual-Link DVI OUT
1
CDVI-4DDS Dual-Link DVI SPLITTER
3 4 521
1Dual-Link DVI OUT1
This slot is to connect with DVI output display with DVI cable for
synchronize outputs up to 2/4.
2Dual-Link DVI IN
This slot is to connect with the input source such as PC/Graphic
card with Dual-Link DVI cable.
3LINK LED
This LED will illuminate when the input source has send out signal
and the output display is in power on status.
4POWER LED
This LED will illuminate when the device is connected to power
adaptor with AC supply.
5DC 5V
Plug the 5V DC power supply included in the package into the unit
and connect it to AC wall outlet.
3
6.2 Rear Panel
Dual-Link DVI OUT Dual-Link DVI OUT Dual-Link DVI OUT
12 13 14
1 2 3
1Dual-Link DVI OUT2~4
This slot is to connect with DVI output display with DVI cable for
synchronize output with OUT 1.
Note: The device will detect OUT 1 as the primary EDID information
when both outputs are connected with active monitor. However,
when only 1 output is detected then the device will treat that as
the primary EDID information.
7. CONNECTION DIAGRAM
PC Dual-link DVI
1:2/1:4 Splitter DVI MONITOR
x2/4
4
8. SPECIFICATIONS
Video Bandwidth 2 x 165MHz
Input Port 1 x Dual-Link DVI
Output Ports 2 or 4 x Dual-Link DVI
I/O Support Resolution VGA ~ WQXGA@60 / Dual-Link
VGA~ WUXGA@60RB / Single-Link
ESD Protection Human body model: ± 8kV(Air-gap discharge)
± 4kV(Contact discharge)
Power Supply 5V/2.6A for 2DDS or 5V/4A for 4DDS DC
(US/EU standards, CE/FCC/UL certied)
Dimensions 125 mm (W) × 102.5 mm (D) × 30 mm (H)/2DDS
141 mm (W) × 163 mm (D) × 38 mm (H)/4DDS
Weight 288g/2DDS, 670g/4DDS
Chassis Material Metal
Silkscreen Colour Black
Operating Temperature 0 ˚C~40 ˚C / 32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C / −4 ˚F~140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 6.8 W/2DDS, 17W/4DDS
5
9. ACRONYMS
ACRONYM COMPLETE TERM
DVI Digital Visual Interface
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CYP Kabel und Steckverbinder Handbücher
CYP
CYP PU-1H7HBTE Bedienungsanleitung
CYP
CYP CLUX-18S Bedienungsanleitung
CYP
CYP PUV-1820TX-AVLC Bedienungsanleitung
CYP
CYP CPLUS-V2E Bedienungsanleitung
CYP
CYP CPRO-U8T Bedienungsanleitung
CYP
CYP CH-526RXPL Bedienungsanleitung
CYP
CYP QU-4-4K22 Bedienungsanleitung
CYP
CYP qu-2-4k22 Bedienungsanleitung
CYP
CYP CDP-13DPI Bedienungsanleitung
CYP
CYP CHDBX-1H1CE Bedienungsanleitung
CYP
CYP CHDMI-4M Bedienungsanleitung
CYP
CYP CLUX-14EP Bedienungsanleitung
CYP
CYP CMDP-13MDPI Bedienungsanleitung
CYP
CYP CLUX-18EU Bedienungsanleitung
CYP
CYP CPRO-U2T Bedienungsanleitung
CYP
CYP DT-12 Bedienungsanleitung
CYP
CYP CLUX-4EN Bedienungsanleitung
CYP
CYP CPRO-4ER Bedienungsanleitung
CYP
CYP CHDBT-1H2CE Bedienungsanleitung
CYP
CYP DCT-28 Bedienungsanleitung
Beliebte Kabel und Steckverbinder Handbücher anderer Marken
BEGA
BEGA 71 085 Bedienungsanleitung
Tesla
Tesla HPWC Bedienungsanleitung
GAMERON
GAMERON LUXURY TV CABLE Bedienungsanleitung
molex
molex Milli-Grid Dual row 87568 Series Bedienungsanleitung
Burndy
Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung
Chauvet DJ
Chauvet DJ Data Stream 8 Bedienungsanleitung