CYP CA-USBAT Bedienungsanleitung
CA-USBAT &
CA-USB100R
USB over CAT5 Transmitter
and Receiver Box
Operation Manual
CA-USBAT & CA-USB100R
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 October 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20091008 Preliminary Release
Table of Contents
1
1
1
1
1
2
3
3
3
3
4
1. Introduction…………………………………………………........……….
2. Applications……………………..…………………………................….
3. Package Contents…………………………......…………….............…
4. System Requirements..………………………..….…………........…….
5. Features…………………………………………….......……........………
6. Specications..………………………………………...........………...….
7. Operation Controls and Functions………………...……........………
7.1 Transmitter’s Panel...................................................................
7.2 Receiver’s Front Panel…………………………….........…….…
7.3 Receiver’s Rear Panel.............................................................
8. Connection and Installation …….…………………..........…..…..…...
1. Introduction
With USB and CAT5/6 connectivity becoming popular nowadays. the growing
need for their flexibility has likewise risen in demand. The USB over CAT5
transmitter and receiver box solution developed for any household and/or
commercial environment. This pair of devices allow any USB host device to
send data within a 100-meters distance while offering expandability for up to
4 USB outputs to perform tasks. Its performance is similar to a connection with
a linked host device on the side. In addition, this pair of devices can also save
data from the output port devices or allow remote control through the display
side even when there's 100 meters apart separating the devices. The USB over
CAT5 transmitter and receiver box are the ideal choices to your USB extension
needs.
2. Applications
USB Extention over CAT5/6 100m
Cross ceiling and room control or remote
Distance appliance control
Host device information sharing and control
3. Package Contents
CA-USBAT x 1
CA-USB100R x 1
USB Cable x 1
Adaptor x 2
Operation Manual x 1
4. System Requirements
Host device PC or laptop with CAT5/6 cables and appliance equipments with
USB cables.
5. Features
Support USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
Operate with USB 2.0 high speed host controllers and USB 1.1 classic hosts
True plug and play without any driver installation required
Supports all major Operating Systems including Windows®, MAC OS®, and
Linux
Display or control of the host device
Save data to a separate room
Tested CAT5 cable distance of up to 100 meters without latency
Simple set up with easy to use
LED indicators for easy viewing
Each USB output port contains 500 mA of power
Total transmission frequency 1G Hz
1
Transmitter
Input Port 1 x USB (B type)
Output Port 1 x RJ45
Receiver
Input Port 1 x RJ45
Output Ports 4 x USB (A type)
ESD Protection Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
Power Supply 5V / 3.2A (US/EU standards, CE/FCC/UL certified)
Dimensions(mm) 102 (W) x 95 (D) x 25 (H)
Weight(g) 214 / Transmitter, 220 / Receiver
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Power Consumption 5W / Transmitter, 12W / Receiver
Relative Humidity 20~90% RH (non condensing)
6. Specications
2
7. Operation Controls and Functions
7.1 Transmitter’s Panel
POWER DC 5V
USB IN
1 2 3
RJ45 OUT
① Power DC 5V Jack: Plug 5V 3.2A DC power supply into the unit and
connect the adaptor to an AC wall outlet.
② USB IN: This slot is where you connect your PC or laptop with USB A to B
type cable when sending signals or controlling the outputs of 4 USB
devices.
③ RJ45: This slot is where you connect a CAT5/6 cable up to 100 meters
long with the receiver side.
7.2 Receiver’s Front Panel
USB OUT 1 USB OUT 2 USB OUT 3 USB OUT 4
CA-USB100R USB 1 BY 4 RECEIVER
① USB OUT 1~4: These slots are where you connect your appliance
eqipments such as keyboard, mouse, printer, webcam or etc. with USB
cables.
7.3 Receiver’s Rear Panel
RJ45 IN
1 2
POWER DC 5V
① Power DC 5V Jack: Plug 5V 3.2A DC power supply into the unit and
connect the adaptor to an AC wall outlet.
② RJ45: This slot is where you connect a CAT5/6 cable up to 100 meters
long with the transmitter side.
1
3
8. Connection and Installation
USB
PC
Flash MP4Keyboard Mouse DV hard drive Monitor
Scanner Printer
CA-USB100R
CA-USBAT
CAT5/6 150m
4
Acronyms A
Acronym Complete Term
CAT5/6 Category 5 / 6 Cable
ESD Electrostatic Discharge
LED Light-emitting Diode
RJ45 Registered Jack 45
USB Universal Serial Bus
5
6
Andere Handbücher für CA-USBAT
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CYP Empfänger Handbücher
CYP
CYP 5-Play HDBaseT PU-507WPRX Bedienungsanleitung
CYP
CYP VEX-E4501T Bedienungsanleitung
CYP
CYP 5-Play HDBaseT PU-507WPRX Bedienungsanleitung
CYP
CYP PUV-1650TX Bedienungsanleitung
CYP
CYP PU-607BDWP-RX Bedienungsanleitung
CYP
CYP AVX-101F-RX Bedienungsanleitung
CYP
CYP CWHDI-TX1 Bedienungsanleitung
CYP
CYP PU-507RX-2H Bedienungsanleitung
CYP
CYP IP-7050RX-TG Bedienungsanleitung
CYP
CYP CA-HDMI150R Bedienungsanleitung
CYP
CYP CA-HDMI250R Bedienungsanleitung
CYP
CYP CH-U331RX Bedienungsanleitung
CYP
CYP CA-COMP100R Bedienungsanleitung
CYP
CYP CH-1604TXD Bedienungsanleitung
CYP
CYP CH-A320RX Bedienungsanleitung
CYP
CYP CH-1507TX Bedienungsanleitung
CYP
CYP PRO-HDMIFO-4K Bedienungsanleitung
CYP
CYP CH-352RX Bedienungsanleitung
CYP
CYP CH-515RXPT Bedienungsanleitung
CYP
CYP PU-107 Bedienungsanleitung
