CYP CDVI-301TX & RX Bedienungsanleitung
CDVI-301TX & RX
DVI-D over One CAT6
Transmitter & Receiver
Operation Manual
CDVI-301TX & RX
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology.
All Rights Reserved.
Version 1.0 October 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
VR0 20110106 Preliminary Release
Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. Package Contents ......................................................................1
4. System Requirements..................................................................1
5. Features........................................................................................1
6. Specifications ..............................................................................2
7. Operation Controls and Functions.............................................3
7.1 Front Panel....................................................................3
7.2 Rear Panel....................................................................3
7.3 Top Panel......................................................................3
8. Connection and Installation .....................................................4
9. Acronyms.....................................................................................5
1
1. Introduction
The DVI-D Transmitter and Receiver over One CAT6 is an intelligent device
for extending your DVI-D signal over long distances to a compatible display.
Instead of searching for lengthy DVI cables, your existing CAT6 cables can be
utilized to perform advanced functions, along with a bandwidth up to 2.25Gbps
per channel. Also, the device receives power through its USB connection,
while Receiver is powered by the CAT6 connection, which makes installing
and powering the Transmitter and Receiver more convenient. These devices
are hardware based with fast and easy installation and are perfectly suited for
common PC and notebook using.
2. Applications
• DVI-D signal extension over CAT6
• DVI-D signal transmitting over long distance
3. Package Contents
• DVI-D over CAT6 Transmitter
• DVI-D over CAT6 Receiver
• Operation Manual
• 2 x 5V/1A USB Power Adaptor
4. System Requirements
Input DVI-D signal source and output DVI-D input display with DVI connection
cables and CAT6 cable in between the transmitter and receiver device.
5. Features
• Supports digital video formats up to 36 bits
• Support high denition input/output up to WUXGA/1080p
• Uses one CAT6 cable for data/DDC transmission
• Equalizes and recovers incoming TMDS data before re-transmitting it in
optimal quality
• DVI Cable testing showed that with WUXGA/1080p 8bit resolution, input
or output device can run up to 12 meters away and with
WUXGA/1080p12bit resolution it can run up to 10 meters away
• When transmitting a signal in WUXGA/1080p 8bit resolution the CAT6
operating distance is 40 meters, and when the signal is in 12bit resolution
the CAT6 operating distance is 15 meters
2
•
It is recommended to use power adaptor on both transmitter and receiver
side to get the best performance and long distance operating.
• Using power adaptor on transmitter side only, receiver side powered over
CAT6 cable, the operating CAT6 cable distance will decrease to 20 meters
or less when transmitting 8bit signal.
Note:
A. This system was tested with CAT6 cable with its specication and result
follow:
24AWG/Standard/UTP/568B
1080p/8bit =25 meters
1080p/12bit =12meters
23AWG/Standard/UTP/568B
1080p/8bit =40 meters
1080p/12bit =15meters
Other cable types, the performance of this system may be different.
B. Cable distance tested with a PS3 & 40" Samsung LED UA40B700 12-bits
LCD TV.
C. Figures provided in this manual are for reference only, acutal gures
may depend on the source and display used along with the cable's
specications.
6. Specications
Transmitter
Input 1 x USB (for Power), 1 x DVI-D
Output 1 x CAT6
Receiver
Input 1 x USB (for Power), 1 x CAT6
Output 1 x DVI-D
Input Cable Distance 12M/ WUXGA or 1080p 8bit, 10M/ WUXGA or 1080p 12bit
Output Cable Distance 12M/ WUXGA or 1080p 8bit, 10M/ WUXGA or 1080p 12bit
CAT6 Cable Distance 40M/ WUXGA or 1080p 8bit, 15M/ WUXGA or 1080p 12bit
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
:
± 4kV (contact discharge)
Operating Temperature 0ºC ~ 45ºC/ 32ºF ~104ºF
StorageTemperature -20ºC ~ 60ºC/ -4ºF ~140ºF
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 3W/TX, 1.5W/RX
3
7. Operation Controls and Functions
7.1 Front Panel
Transmitter Receiver
DVI-D
IN
1 2
DVI-D
OUT
q. DVI-D IN: This slot is to connect with source equipment such as PC or
graphic card for input signal sending.
w. DVI-D OUT: This slot is to connect with display monitor or TV for image
display.
7.2 Rear Panel
Transmitter Receiver
21 3
USB
5V CAT6 OUT USB
5V CAT6 IN
q. USB 5V: This slot is to connect with USB 5V power adaptor included in the
device’s package.
w. CAT6 OUT: This slot is to connect with CAT6 cable at the receiver side.
e. CAT6 IN: This slot is to connect with CAT6 cable from the transmitter side.
7.3 Top Panel
Transmitter Receiver
DVI-D TRANSMITTER
Intelligent Device
DVI-D RECEIVER
Intelligent Device
q. Power LED: The blue LED will illuminate when the device is connected
with power and detected the signal.
4
8. Connection and Installation
NB or PC
12M WUXGA/1080p 8bits
10M WUXGA/1080p 12bits
40M WUXGA/1080p 8bits
15M WUXGA/1080p 12bits
Display
12M WUXGA/1080p 8bits
10M WUXGA/1080p 12bits
B
B
5
Acronyms A
Acronym Complete Term
CAT6 Category 6 cable
DDC Display Data Channel
DVI-D Digital Visual Interface – Digital
TMSD Transition Minimized Differential Signaling
WUXGA Widescreen Ultra eXtended Graphics Array
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CYP Empfänger Handbücher
CYP
CYP AVX-101F-KIT Bedienungsanleitung
CYP
CYP PU-607BDWP-RX Bedienungsanleitung
CYP
CYP COH-Tx Bedienungsanleitung
CYP
CYP CH-103Rx Bedienungsanleitung
CYP
CYP PRO-F21RX Bedienungsanleitung
CYP
CYP CH-107RXN Bedienungsanleitung
CYP
CYP VEX-E4501T Bedienungsanleitung
CYP
CYP CH-1604TXD Bedienungsanleitung
CYP
CYP PUV-1650TX Bedienungsanleitung
CYP
CYP PU-107 Bedienungsanleitung
CYP
CYP CH-2535TX Bedienungsanleitung
CYP
CYP CH-2527TXV Bedienungsanleitung
CYP
CYP CH-507TX Bedienungsanleitung
CYP
CYP CH-331H-RX Bedienungsanleitung
CYP
CYP PRO-HDMIFO-KIT Bedienungsanleitung
CYP
CYP PU-607BD-RX Bedienungsanleitung
CYP
CYP CA-COMP100R Bedienungsanleitung
CYP
CYP PU-1109KIT Bedienungsanleitung
CYP
CYP PUV-2100RX-AVLC Bedienungsanleitung
CYP
CYP PU-DVI1109TX Bedienungsanleitung
