CYP CDPS-P313RTX Bedienungsanleitung
Operation Manual
Operation Manual
4×1 Multi-input to HDBT Live Video Streaming
Transmitter with Recording
CDPS-P313RTX
DISCLAIMERS
The information in this manual has been carefully checked and is believed
to be accurate. Cypress Technology assumes no responsibility for any
infringements of patents or other rights of third parties which may result from
its use.
Cypress Technology assumes no responsibility for any inaccuracies that
may be contained in this document. Cypress also makes no commitment to
update or to keep current the information contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express written
permission and consent from Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are trademarks of
the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain, moisture
or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings
or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it
is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to
be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings
in the unit housing that provide ventilation and allow for sucient space
for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use to
avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2020/02/04 Preliminary release
CONTENTS
1. Introduction...................................................... 1
2. Applications ..................................................... 1
3. Package Contents ........................................... 2
4. System Requirements..................................... 2
5. Features............................................................ 3
6. Operation Controls and Functions ................ 4
6.1 Front Panel.................................................. 4
6.2 Rear Panel................................................... 6
6.3 IR Cable Pinouts.......................................... 7
6.4 RS-232 Pinout and Defaults........................ 7
6.5 WebGUI Control .......................................... 8
6.5.1 Live Tab ............................................ 10
6.5.2 Video Switch Tab.............................. 11
6.5.3 EDID Setting Tab.............................. 13
6.5.4 Record Setting Tab........................... 15
6.5.5 Time Setting Tab............................... 18
6.5.6 Trigger Setting Tab ........................... 20
6.5.7 User Cong Tab................................ 21
6.5.8 System Setting Tab .......................... 21
6.6 Telnet Control ............................................ 23
6.7 Serial and Telnet Commands .................... 24
7. Connection Diagram ..................................... 39
8. Specications ................................................ 40
8.1 Technical Specications ............................ 40
8.2 Video Specications .................................. 41
8.2.1 Video Inputs ..................................... 41
8.2.2 Video Outputs................................... 43
8.3 Audio Specications .................................. 45
8.3.1 Digital Audio ..................................... 45
8.3.2 Analog Audio .................................... 45
8.4 Cable Specications.................................. 46
8.5 HDBaseT Features.................................... 47
9. Acronyms ....................................................... 48
1
1. INTRODUCTION
This Video Streaming Transmitter with Recording makes online broadcasting
of live video, with a locally stored archive, an easy and simple process.
Video sources from cameras, PCs, video game consoles, etc. are a breeze
to connect for immediate broadcast and recording. Video content up to 4K
UHD (4K@60Hz, 4:2:0, 8-bit) is supported and is automatically scaled to
a resolution that is more appropriate for ecient streaming. In addition to
the standard HDMI input, DisplayPort, USB-C and VGA (with paired audio)
inputs are also supported as sources. Along with the streaming and recording
functionality, an HDBaseT output is provided for local, or long distance (up to
70m at 1080p when using Cat.6A), monitoring of the selected input source
when connected to a compatible receiver.
All video content is encoded and streamed with minimal latency and high
quality making it ideal for live streaming events to a variety of popular online
streaming services or within the local network. The video may also be
recorded locally (via USB thumb drive) or to a local network drive while it is
being streamed.
A trigger input interface is also provided to allow the easy addition of a
remote control keypad, or other trigger-supporting products, which can be
installed within a podium or within a table in a conference room or classroom.
This interface can allow the user to activate functions with the simple press
of a button.
Comprehensive EDID management provides improved compatibility with
dierent sink devices. The intuitive WebGUI provides easy control of your
live event stream including source selection, resolution, bitrate and more.
This unit can be controlled and congured via front panel buttons, an intuitive
WebGUI, Triggers, RS-232, or Telnet.
2. APPLICATIONS
• Webcasting
• Social Media Broadcasting
• Live Event Streaming
• Video on Demand Streaming
• Live recording and storage
2
3. PACKAGE CONTENTS
• 1× 4×1 Multi-input to HDBT Live Video Streaming Transmitter with
Recording
• 1× 24V/3.75A DC Power Adapter
• 1× AC Power Cord
• 2× 5-pin Terminal Block
• 2× 4-pin Terminal Block
• 1× IR Blaster Cable
• 1× IR Extender Cable
• 1× Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI, VGA, DisplayPort or USB-C source equipment such as a media
player, video game console, PC, or video camera.
• Available streaming server destination such as YouTube or Facebook or a
recording storage target such as USB thumb drive or NAS.
• A compatible HDBaseT receiver with PoH(PD) support is recommended.
• The use of Premium High Speed HDMI cables, and industry standard
Cat.6, Cat.6A or Cat.7, is highly recommended.
• Video streaming preview support within the WebGUI requires the use
of the Chrome, Internet Explorer or Safari browser with the appropriate
plugins (VLC for IE and Safari or VXG Player for Chrome) installed.
Note: The Firefox browser does not currently support the WebGUI’s video
streaming preview window.
• To view RTSP streams directly on the local network, RTSP stream
compatible video player software (such as VLC Media Player or PotPlayer)
must be used.
3
5. FEATURES
• 4 inputs (HDMI, DisplayPort, USB-C, and VGA)
• 1 HDBaseT output
• Digital inputs are HDCP 1.x and HDCP 2.2 compliant
Note: HDCP encrypted sources cannot be streamed over the Internet or
recorded and will be blacked out
• HDMI, DisplayPort, and USB-C inputs support resolutions up to 4K UHD
(4K@60Hz, 4:2:0, 8-bit)
• VGA input supports resolutions up to 1080p@60Hz and is paired with an
analog stereo audio input
• HDBaseT output supports resolutions up to 4K UHD (4K@60Hz, 4:2:0,
8-bit)
• Advanced H.264 video streaming and recording is provided at QVGA
(320×240), VGA (640×480), 720p, or 1080p at up to 60fps
• Recorded video can be stored on a locally inserted USB thumb drive, or to
a designated network drive
• Can act as a streaming server (using RTP/RTSP protocols) or streaming
client (using the RTMP protocol)
• Trigger Control Keypad support for easy, single-button, function activation
(Optional)
• Supports scheduled recording with an internet updated calendar
• Supports text overlays over live broadcasts
• Integrated downscaling function will convert UHD video content (up to
4K@60Hz) down to 1080p or lower for live video broadcast and recording
• Generates 4 simultaneous streams from the same video source
(1080p@60fps, 1080p@30fps, VGA@30fps, QVGA@30fps) for easy
system integration at multiple bandwidth targets
• Supports automatic input switching
• Advanced EDID management including Internal , External & User
congured EDID selections
• Control via front panel buttons, WebGUI, Triggers, Telnet, and RS-232
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
SERV. START
RECORD
STOP SOURCE AUDIODP
USB-C
HDMI VGA
PWR.
INPUT
87654321
1PWR. LED: This LED will illuminate to indicate the unit is on and
receiving power.
2SERV. Port: Attach a standard USB thumb drive or external hard drive
for storage of recorded video. (Optional)
Note:StoragemediamustbeformattedasFAT32orexFAT.Videoles
are stored in *.mp4 format.
3RECORD LED: This LED will blink while video recording is active.
RECORD START Button: Press this button to immediately start
recording to the designated recording target.
RECORD STOP Button: Press this button to immediately stop any
current recording session.
RECORD SOURCE Button: Press this button to sequentially switch
through the available inputs.
Note: Changing the input source will cause the video stream to restart.
Connected stream targets may need to be restarted or reconnected.
4DP INPUT Port & LED: Connect to DisplayPort source equipment such
as a PC or laptop. The LED will illuminate amber when a source is
detected and green when the source is selected.
5USB-C INPUT Port & LED: Connect to USB Type-C video source
equipment such as a PC or laptop. The LED will illuminate amber when a
source is detected and green when the source is selected.
Note: Not all devices with USB Type-C ports can support video output.
Please verify that the device supports video output from the USB Type-C
port before connecting it.
6HDMI INPUT Port & LED: Connect to HDMI source equipment such as
a media player, game console, or set-top box. The LED will illuminate
amber when a source is detected and green when the source is selected.
Inhaltsverzeichnis
Andere CYP Sender Handbücher
CYP
CYP CH-1527TXPLV Bedienungsanleitung
CYP
CYP CHDBT-1H7CE Bedienungsanleitung
CYP
CYP PU-515PLTX-1H Bedienungsanleitung
CYP
CYP PUV-1660TTX Bedienungsanleitung
CYP
CYP IP-7000TX Installationshandbuch
CYP
CYP CSI-8H8CVTX Bedienungsanleitung
CYP
CYP CPLUS-12FTX Bedienungsanleitung
CYP
CYP DCT-30TX Bedienungsanleitung
CYP
CYP PU-1H7HBTL Bedienungsanleitung
CYP
CYP PUV-3090TX-UEA Bedienungsanleitung
CYP
CYP CH-A320TX Bedienungsanleitung
CYP
CYP PU-507TX-CVGA Installationshandbuch
CYP
CYP CA-HDMIAT Bedienungsanleitung
CYP
CYP PUV-3000TX Bedienungsanleitung
CYP
CYP PUV-1830TX-AVLC Bedienungsanleitung
CYP
CYP CH-2603TX Bedienungsanleitung
CYP
CYP CH-306TXA & RXA Bedienungsanleitung
CYP
CYP CH-103TX Bedienungsanleitung
CYP
CYP PU-USB2-KIT Bedienungsanleitung
CYP
CYP CH-2527TX Bedienungsanleitung
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
