Digi ConnectCore 6UL Kurzanleitung

ConnectCore® 6UL

System-on-module solution

Hardware Reference Manual

Revision history—90001523

Revision Date Description

F September

2018

Added clarifying note to pins connected to Wireless IC; added variant.

G January

2019

Added backdrive caution.

H April 2019 Added support for power-up sequence configuration, changed some pinout

notes and cell names, added non-rechargeable coin cell section; added

ambient temperature power consumption note.

J April 2019 Updated assembly instructions.

K October

2019

Updated LGA_L3 description.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United

States and other countries worldwide. All other trademarks mentioned in this document are the

property of their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

ConnectCore® 6UL Hardware Reference Manual 2

ConnectCore® 6UL Hardware Reference Manual 3

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

techcomm@digi.com

Include the document title and part number (ConnectCore® 6UL Hardware Reference Manual,

90001523 K) in the subject line of your email.

Contents

About the ConnectCore® 6UL

Features and functionality 6

ConnectCore 6UL module variants 7

Block diagrams 8

ConnectCore 6UL module 9

NXP i.MX6UL application processor 10

Power interfaces 11

Power supply architecture 11

System power-up sequence 14

Coin cell 16

Bootstrap 17

Boot from fuses 17

Internal boot 18

Serial downloader 19

Wireless interfaces 19

WLAN IEEE 802.11a/b/g/n/ac 19

Antenna ports 24

Bluetooth 25

RF control signals 25

Parallel display 25

Micro Controller Assist™ 26

ConnectCore 6UL module lines related to the MCA 27

Reset control 28

IOs 29

Watchdog 31

Real-time clock 32

Tamper support 32

Power management 33

MCA firmware update 36

CryptoAuthentication device 36

Module pinout - general layout 36

External signals and pin multiplexing 38

Module specifications

Electrical specifications 110

Absolute maximum ratings 110

With front-end LDO 110

Without front-end LDO 110

Undervoltage detection 110

ConnectCore® 6UL Hardware Reference Manual 4

ConnectCore® 6UL Hardware Reference Manual 5

Overvoltage detection 111

Power consumption 111

Power consumption use cases 111

Global power consumption 114

Power consumption: Wireless power consumption increase 114

Power consumption: Real wireless transmission 115

Power consumption: Wireless-UART bridge 116

Mechanical specifications 117

Dimensions 117

Host PCB footprint and cutout 118

Weight 120

Environmental specifications 120

Socket options 120

Assembly instructions

Moisture sensitivity and shelf life 123

Mounting 123

Coplanarity 123

Solder paste print 123

Stencil 124

SMT pick and place 124

SMT process parameter reference - castellation and LGA applications 124

Reflow oven profile 124

Vapor phase profile 126

Vapor Phase IBL 309 batch soldering machine settings 127

Conformal coating 127

Regulatory information and certifications

Maximum power and frequency specifications 129

External antenna 129

Bluetooth certification 129

United States FCC 129

FCC notices 130

FCC-approved antennas 130

RF exposure 131

Europe 131

CE mark 131

OEM labeling requirements 132

CE labeling requirements 132

Declarations of Conformity 132

Approved antennas 132

Canada (IC) 132

Labeling requirements 133

Transmitters with detachable antennas 133

RF exposure 133

Approved antennas 134

Japan 134

Approval Label (MIC Marking) 135

About the ConnectCore® 6UL

The ConnectCore 6UL is a secure and extremely cost-effective connected System-on-Module platform.

Its innovative Digi SMTplus™ (patent-pending) surface mount form factor allows you to choose

simplified design integration leveraging proven and easy-to-use edge-castellated SMT technology, or a

versatile LGA option for ultimate design flexibility with access to virtually all interfaces.

Built on the NXP i.MX6UL application processor, the module is the intelligent communication engine

for today’s secure connected devices. It integrates dual-Ethernet and pre-certified dual-band Wi-Fi

(802.11a/b/g/n/ac) with dual mode Bluetooth 4.2 connectivity.

Features and functionality

The ConnectCore 6UL system-on-module is based on the i.MX6UL processor from NXP. This processor

offers a number of interfaces, most of them multiplexed and not available simultaneously. The module

has the following features:

li.MX6UL single ARMCortex-A7 core operating at speeds up to 528 MHz:

o32 Kb L1 instruction cache

o32 Kb L1 data cache

oUp to 128 KB unified instruction/data L2 cache

oNEONMPE (media processing engine) co-processor

lUp to 1 GB, 16-bit DDR3-800 memory

lUp to 2 GB, 8-bit SLC NAND flash memory

lNXP PF3000 power management IC (PMIC):

ox 4 DC/DC buck converters

ox 6 LDO regulators

ox 1 DC/DC boost converter

oOTP (one-time programmable) memory

oCoin cell charger and always-ON RTC supply

lGraphical hardware accelerators:

oPXP (PiXel Processing Pipeline)

oASRC (asynchronous sample rate converter)

lSecure Element

lSecurity accelerators:

ConnectCore® 6UL Hardware Reference Manual 6

About the ConnectCore® 6UL ConnectCore 6UL module variants

ConnectCore® 6UL Hardware Reference Manual 7

oARMTrustZone

oCAAM (cryptographic acceleration and assurance module)

oSNVS (secure non-volatile storage)

oCSU (central security unit)

oA-HABv4 (advanced high-assurance boot)

lIEEE 802.11 a/b/g/n/ac WLAN interface

lBluetooth®version 4.2 dual-mode

lARM Cortex-M0+ Micro Controller Assist™ (MCA) subsystem

lDebug interfaces:

oSystem JTAG controller

oSingle Wired Debug (SWD) interface for the MCA

lSupport of i.MX6UL interfaces:

o16-bit data/address bus

oDisplay: 24-bit parallel bus

oCamera: 24-bit parallel bus

oKPP (key pad port)

oTSC (touch screen controller)

ox 2 MMC/SD/SDIO card ports

ox 2 USB 2.0 OTG with integrated HS USB PHYs

ox 2 10/100 Mbps Ethernet MAC

oUART, SPI, I2C, PWM, ADC, CAN, I2S, and GPIOs

lUltra-miniature SMT module (29 x 29 x 3.5 mm) based on 245 pads (245 LGA, 76 also available as

castellated pads)

ConnectCore 6UL module variants

Smart

part

number

Part

number

ConnectCore

6UL SOM

variant Description CPU1

DDR3/Bus

-width2WiFi/Bluetooth

CC-WMX-

JN58-NE

50001939-

0x02 ConnectCore for

i.MX6UL, 528

MHz, Industrial

Temp, 256 MB

SLC NAND, 256

MB DDR3, Dual

10/100 Ethernet,

802.11a/b/g/n/ac,

Bluetooth 4.2,

ANT+

G2CVK05 -

40/+105°C

528 MHz

256MiB

(1x2Gbit)

/ 16bit, -

40/+95ºC

About the ConnectCore® 6UL Block diagrams

ConnectCore® 6UL Hardware Reference Manual 8

Smart

part

number

Part

number

ConnectCore

6UL SOM

variant Description CPU1

DDR3/Bus

-width2WiFi/Bluetooth

CC-MX-

JN58-Z1

50001939-

0x03 ConnectCore for

i.MX6UL, 528

MHz, Industrial

Temp, 256 MB

SLC NAND, 256

MB DDR3, Dual

10/100 Ethernet

G2CVK05 -

40/+105°C

528 MHz

256MiB

(1x2Gbit)

/ 16bit, -

40/+95ºC

CC-WMX-

JN7A-NE

50001939-

0x04 ConnectCore for

i.MX6UL, 528

MHz, Industrial

Temp, 1GB SLC

NAND, 1 GB DDR3,

Dual 10/100

Ethernet,

802.11a/b/g/n/ac,

Bluetooth 4.2,

ANT+

G2CVK05 -

40/+105°C

528 MHz

1GiB (1x

8Gb) / 16

bit, -

40/+85°C

CC-MX-

JN7A-Z1

50001939-

0x05 ConnectCore for

i.MX6UL-2, 528

MHz, Industrial

Temp, 1GB SLC

NAND, 1 GB DDR3,

Dual 10/100

Ethernet

G2CVK05 -

40/+105°C

528 MHz

1GiB (1x

8Gb) / 16

bit, -

40/+85°C

1CPU temperature is Tj (junction)

2DDR3 temperature is Ta (ambient)

Block diagrams

The figures below show block diagrams of the ConnectCore 6UL module and of the NXP i.MX6UL

application processor.

About the ConnectCore® 6UL Block diagrams

ConnectCore® 6UL Hardware Reference Manual 9

ConnectCore 6UL module

About the ConnectCore® 6UL Block diagrams

ConnectCore® 6UL Hardware Reference Manual 10

NXP i.MX6UL application processor

Andere Handbücher für ConnectCore 6UL

Inhaltsverzeichnis

Andere Digi Steuereinheit Handbücher

Digi

Digi XBee Bedienungsanleitung

Digi

Digi XBee3 DigiMesh 2.4 Bedienungsanleitung

Digi

Digi Connect ME Anwendungshandbuch

Digi

Digi XBee Bedienungsanleitung

Digi

Digi Digi Connect EM DC-EM02T-JT Anwendungshandbuch

Digi

Digi XBee-PRO 900HP Bedienungsanleitung

Digi

Digi XBee-PRO Bedienungsanleitung

Digi

Digi ConnectCore XP 270 Anwendungshandbuch

Digi

Digi XBee3 DigiMesh 2.4 Technisches Handbuch

Digi

Digi XBee3 802.15.4 Bedienungsanleitung

Digi

Digi Digi One EM Anwendungshandbuch

Digi

Digi Connect ME 9210 Bedienungsanleitung

Digi

Digi XBee 868LP Bedienungsanleitung

Digi

Digi XBee 3 Kurzanleitung

Digi

Digi XBee ZigBee S2C Bedienungsanleitung

Digi

Digi ConnectCore 6UL Kurzanleitung

Digi

Digi INFOTAG 2.13 Bedienungsanleitung

Digi

Digi XBee3-PRO Micro Kurzanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi ConnectCore Series Anwendungshandbuch

Digi

Digi Digi Conntect ME Anwendungshandbuch

Digi

Digi XBee3 802.15.4 Bedienungsanleitung

Digi

Digi XBee XTC Bedienungsanleitung

Digi

Digi ConnectCore 8X Kurzanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung