Digitus DS-30103 Bedienungsanleitung

2-CHANNEL SATA II

PCI EXPRESS CARD

User Manual

Features and Benefits

Compliant with one-lane 2.5Gb/s PCI Express specification

Compliant with Serial ATA 1.0 specification

Supports Serial ATA Generation 2 transfer rate of 3.0Gb/s

Supports Native Command Queue (NCQ) on SATA ports

Provides three independent channels to connect two SATA

and one PATA hard disk drive

Supports up to UDMA6 transfer mode of PATA

Supports up to 4 storage device connection

Supports RAID 0, 1, 0+1 and JBOD functions

Supports Windows 7, Vista, XP and 2000

Connectors:

2 x internal SATA connectors,

2 x external eSATA connectors

1 x PATA connector

Package Contents

1x PCIe SATA II 300 + PATA Raid Card

1x Manual 1x Driver CD

2x SATA Data Cable 2x SATA Power Cable

1x ATA 133 IDE Cable

System Requirements

Windows® 2000, Windows XP/2003/Vista 32/64 bit

PCI Express-enabled system with an available PCI Express

slot

Hardware Description

JumperSettings

J1-J4: Enable CON1 or CON3 (Default: CON1)

J5-J8: Enable CON2 or CON4 (Default: CON2)

JP Description Default

J1-J4 1-2 close Enable SATA CON1 1-2 close

2-3 close Enable SATA CON3

J5-J8 1-2 close Enable SATA CON2 1-2 close

2-3 close Enable SATA CON4

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the bard, carefully align the card’s bus connector with the

selected PCIe slot on the motherboard. Push the board down firmly.

5. Attach your internal or external devices to the PCIe SATA II 300 +

PATA Raid Card.

6. Replace the slot bracket’s holding screw to secure the card.

7. Replace the computer cover and reconnect the power cord.

RAID Arrays

RAID Arrays are setup in the PCIe SATA II 300 + PATA Raid

Card’s BIOS.

There are four configurations supported:

RAID level/Type Configurations Number of disks needed

RAID 0 Disk Striping 2 or 3 or 4

RAID 1 Disk Mirroring 2

RAID 0+1 Disk Striping

+ Mirroring

JBOD Disk Concatenation 2 or 3 or 4

RAID 0 (Striping)

1. As the BIOS boots press Ctrl+J when prompted to enter the

RAID BIOS.

2. At the next screen select Create RAID Disk Drive, press

Enter.

3. Enter RAID name, press Enter.

4. Please use arrow keys ↑and ↓to switch the RAID level

to 0-Stripe, then press Enter.

5. Please use arrow keys ↑and ↓to switch the disk, use the

“space” key to mark the selected disk, then press Enter.

6. Please use arrow keys ↑and ↓to select chunk size from

4K, 8K, 16K, 32K, 64K or 128K, then press Enter.

7. Input the RAID size, press Enter.

8. When asked Created RAID on the select HDD (Y/N)?,

press Y to accept.

9. At the next screen select Save And Exit Setup, press

Enter. When asked Save to disk &Exit (Y/N)?, press Y to

exit the BIOS.

RAID 1 (Mirroring)

1. As the BIOS boots press Ctrl+J when prompted to enter the

RAID BIOS.

2. At the next screen select Create RAID Disk Drive, press

Enter.

3. Enter RAID name, press Enter.

4. Please use arrow keys ↑and ↓to switch the RAID level

to 1-Mirror, then press Enter.

5. Please use arrow keys ↑and ↓to switch the disk, use the

“space” key to mark the selected disk, then press Enter.

6. Input the RAID size, press Enter.

7. When asked Created RAID on the select HDD (Y/N)?,

press Y to accept.

8. At the next screen select Save And Exit Setup, press

Enter. When asked Save to disk &Exit (Y/N)?, press Y to

exit the BIOS.

CONCATENATION (JBOD)

1. As the BIOS boots press Ctrl+J when prompted to enter the

RAID BIOS.

2. At the next screen select Create RAID Disk Drive, press

Enter.

3. Enter RAID name, press Enter.

4. Please use arrow keys ↑and ↓to switch the RAID level

to JBOD-Concatenate, then press Enter.

5. Please use arrow keys ↑and ↓to switch the disk, use the

“space” key to mark the selected disk, then press Enter.

6. Input the RAID size, press Enter.

7. When asked Created RAID on the select HDD (Y/N)?,

press Y to accept.

8. At the next screen select Save And Exit Setup, press

Enter. When asked Save to disk &Exit (Y/N)?, press Y to

exit the BIOS.

RAID 0+1 (Striping + Mirroring)

1. As the BIOS boots press Ctrl+J when prompted to enter the

RAID BIOS.

2. At the next screen select Create RAID Disk Drive, press

Enter.

3. Enter RAID name, press Enter.

4. Please use arrow keys ↑and ↓to switch the RAID level

to 01-Stripe+Mirror, then press Enter.

5. Please use arrow keys ↑and ↓to select chunk size from

4K, 8K, 16K, 32K, 64K or 128K, then press Enter.

6. Input the RAID size, press Enter.

7. When asked Created RAID on the select HDD (Y/N)?,

press Y to accept.

8. At the next screen select Save And Exit Setup, press

Enter. When asked Save to disk &Exit (Y/N)?, press Y to

exit the BIOS.

Delete RAID Disk Drive

1. As the BIOS boots press Ctrl+J when prompted to enter the

RAID BIOS.

2. At the next screen select Delete RAID Disk Drive, press

Enter.

3. Please use arrow keys ↑and ↓to select the array you

want to delete, use the “space” key to mark the selected

array, then press DEL.

4. When asked ALL DATA ON THE RAID WILL LOST!! ARE

YOU SURE TO DELETE (Y/N), press Y to accept.

Inhaltsverzeichnis

Andere Digitus PCI-Karte Handbücher

Digitus

Digitus DS-33102-1 Bedienungsanleitung

Digitus

Digitus DS-33160 Bedienungsanleitung

Digitus

Digitus DS-30040-2 Bedienungsanleitung

Digitus

Digitus DS-30226 Bedienungsanleitung

Digitus

Digitus PCI-Add-On-Card Firewire IEEE1394 Bedienungsanleitung

Digitus

Digitus DN-10131 Bedienungsanleitung

Digitus

Digitus DS-33101-1 Bedienungsanleitung

Digitus

Digitus 4-CHANNEL SATA II Bedienungsanleitung

Digitus

Digitus DN-10133 Bedienungsanleitung

Digitus

Digitus DS-30220-3 Bedienungsanleitung

Digitus

Digitus DS-33170 Bedienungsanleitung

Digitus

Digitus DS-30201-5 Bedienungsanleitung

Digitus

Digitus DS-33152 Bedienungsanleitung

Digitus

Digitus Gigabit Ethernet PCI Express Card Bedienungsanleitung

Digitus

Digitus DS-30222 Bedienungsanleitung

Digitus

Digitus DS-30201-4 Bedienungsanleitung

Digitus

Digitus DS-30225 Bedienungsanleitung

Digitus

Digitus Serial ATA RAIDPCI Card Bedienungsanleitung

Digitus

Digitus DN-7006GT Bedienungsanleitung

Digitus

Digitus DS-30020-1 Bedienungsanleitung

Digitus

Digitus DS-30040 Bedienungsanleitung

Digitus

Digitus DN-7066 Bedienungsanleitung

Digitus

Digitus FIREWIRE 800 Bedienungsanleitung

Digitus

Digitus DS-30105 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung