Digitus Gigabit Ethernet PCI Express Card Bedienungsanleitung

Gigabit Ethernet PCI Express Card

User Manual

Features

Designed to meet PCI Express Base Specification Revision

1.0a

Single-lane (or x1) PCI Express throughput supports rates of

2.5Gbps

Compliant with 10/100/1000 IEEE 802.3 specification

10/100/1000M data rate auto-negotiation

LEDs indicate the status of data transmission

Automatic MDI/MDIX crossover at all speed

Support Wake On Lan(WOL) power management (optional)

Feature full duplex mode that doubles the network connection

speed

Support Windows® 2000, XP, Server 2003, Vista, 7 operating

system

Package Contents

1 x PCIe Gigabit Ethernet Card

1 x User Manual

1 x Driver CD

System Requirements

Windows® 2000/XP/Server 2003/Vista/7

PCI Express-enabled system with an available PCI Express slot

CAT5/CAT5E/CAT6 UTP/STP cable

Hardware Description

LED Indicators

The following table provides descriptions of the LED status and

their meaning.

LED Color Status Description

100/ACT GREEN

ON The port is connecting with 100 Mbps

BLINK Sending/Receiving Packets

1000/ACT GREEN

ON The port is connecting with 1000 Mbps

BLINK Sending/Receiving Packets

Hardware Installation

Follow the instruction given below to install the Gigabit Ethernet PCI

Express Card.

1. Turn your computer off and remove the power plug from the plug

socket.

2. Remove the cover from the computer case.

3. Remove the metal cover plate on the rear of a free PCI Express

slot.

4. Insert the card into one free PCI Express slot and screw it firmly

on the bracket side.

5. Place the cover back onto the computer.

6. Insert the plug into plug socket.

Driver Installation

For Windows® 2000/XP/Server 2003

Once the Windows® 2000, XP and Server 2003 startup. Gigabit

Ethernet PCI Express Card will be detected by system. Following is the

procedures for installing Gigabit Ethernet PCI Express Card driver

under Windows® XP Service Pack 2 operating system.

1. When Found New Hardware Wizard Window pop-up, please

click “Cancel” button to cancel the driver installation for the

device at this moment. The driver for this device will be installed

in the next step.

2. Please insert the CD driver bound with Gigabit Ethernet PCI

Express Card into your CD-ROM Drive.

3. At the Windows desktop click Start, then Run.

4. Type D:\DN-1013-1\setup.exe, then click OK. (Change D:\ to

match your CD-ROM drive letter)

5. Follow the on-screen instructions to complete the instructions to

complete the installation to complete the installation.

6. Restart Windows to complete the installation.

For Windows® Vista

In Windows® Vista, when the system is booted up it automatically

detects the Gigabit Ethernet PCI Express Card and install the Gigabit

Ethernet PCI Express Card with in-build drivers. Following is the

procedures for upgrading Gigabit Ethernet PCI Express Card driver

under Windows® Vista operating system.

1. Please insert the CD driver bound with Gigabit Ethernet PCI

Express Card into your CD-ROM Drive.

2. At the Windows desktop click Start, then Run.

3. Type D:\ DN-1013-1\Vista\setup.exe, then click OK. (Change

D:\ to match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the instructions to

complete the installation to complete the installation.

5. Restart Windows to complete the installation.

Verify Driver Installation

Click on the “Device Manager” tab in System Properties, which you

access from the Windows Control Panel. You should see an “Realtek

RTL8168/8111 PCI-E Gigabit Ethernet NIC (Windows®

2000/XP/Server2003” or Realtek RTL8168/8111 Family PCI-E

Gigabit Ethernet NIC (NDIS 6.0) (Windows® Vista)” installed under

“Network adapters” item.

START > Control Panel > System > Device Manager

Networking Settings

1. Click “Network Connection” in Control Panel to set your

network settings.

2. Right-click the Local Area Connection used by the Gigabit

Ethernet PCI Express Card, then select “Properties” from the

pop-up menu.

3. Double-click the “Internet Protocol (TCP/IP)” item to set

network settings.

4. Right-click the Local Area Connection used by the Gigabit

Ethernet PCI Express Card., then select “Status” from the pop-up

menu. You can affirm network status.

Troubleshooting

The computer can not detect the Gigabit Ethernet PCI Express

Card

1. Make sure that the Gigabit Ethernet PCI Express card is correctly

plugged into the PCI Express slot; if not, turn off the computer

and plug it again.

2. If the Gigabit Ethernet PCI Express card is plugged in correctly,

see if the golden connectors on the card are clean; if not, clean the

connector surface.

3. If still not, please change another PCI Express slot on your

motherboard.

4. Please upgrade your motherboard BIOS to the latest version. If it

sill not work, contact your motherboard vendor asking the

advanced supporting for BIOS updated.

5. The board itself might be defective. You can try another

motherboard testing Gigabit Ethernet PCI Express card working

or not.

Computer failed to start after inserting Gigabit Ethernet PCI

Express Card

Turn off the computer, remove the Gigabit Ethernet PCI Express card,

and try to restart the computer. If the computer starts successfully, it

means that this card has not been inserted into the PCI Express slot

correctly. Please insert the card firmly into the PCI Express slot or try

another slot.

How to deal with a exclamation point on Ethernet Host controller

1. Please shutdown your computer and move the card to another

available slot then re-install Gigabit Ethernet PCI Express Card

driver again.

2. Please point on this device then right-chick on the mouse.

3. This exclamation point usually means there is a resource conflict

between the Gigabit Ethernet PCI Express Card and another card

in your system. Please move the card to another available slot.

Restart your computer. Windows will then re-configure itself and

re-assign resources. Check your device manager again. If the

exclamation point is still there then repeat the process until it no

longer appears.

I can not use Gigabit Ethernet transfer speed

1. Please affirm your Ethernet environment supporting Gigabit

structure.

2. Please use CAT6 UTP/STP cable.

How to configure 10/100/1000Mbps Ethernet structure

Connect 10/100/1000Mbps Ethernet over unshielded twisted pair

(UTP) cable. Gigabit Ethernet PCI Express card has the ability of

automatic sensing and operating on either speed without manual

reconfiguration.

Inhaltsverzeichnis

Andere Digitus PCI-Karte Handbücher

Digitus

Digitus DS-30222 Bedienungsanleitung

Digitus

Digitus ds-33000-1 Bedienungsanleitung

Digitus

Digitus Firewire 800 Bedienungsanleitung

Digitus

Digitus DS-30220-3 Bedienungsanleitung

Digitus

Digitus DS-30103 Bedienungsanleitung

Digitus

Digitus DS-33170 Bedienungsanleitung

Digitus

Digitus DS-33152 Bedienungsanleitung

Digitus

Digitus DS-30000-1 Bedienungsanleitung

Digitus

Digitus DS-33170 Bedienungsanleitung

Digitus

Digitus DS-33160 Bedienungsanleitung

Digitus

Digitus Serial ATA RAIDPCI Card Bedienungsanleitung

Digitus

Digitus PCI-Add-On-Card Firewire IEEE1394 Bedienungsanleitung

Digitus

Digitus DN-10133 Bedienungsanleitung

Digitus

Digitus DS-33003 Bedienungsanleitung

Digitus

Digitus DS-33002-1 Bedienungsanleitung

Digitus

Digitus DS-30105 Bedienungsanleitung

Digitus

Digitus DS-30221-1 Bedienungsanleitung

Digitus

Digitus DS-30040-2 Bedienungsanleitung

Digitus

Digitus DN-7006GT Bedienungsanleitung

Digitus

Digitus DN-7066 Bedienungsanleitung

Digitus

Digitus DS-30020-1 Bedienungsanleitung

Digitus

Digitus DS-30040-2 Bedienungsanleitung

Digitus

Digitus DS-33040-1 Bedienungsanleitung

Digitus

Digitus DS-33003 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung