Digitus MULTI I/O COMBI PCI ADD-ON CARD Bedienungsanleitung

MULTI I/O COMBI

PCI ADD-ON CARD

User Manual

Features and Benefits

Features l Supports Standard Parallel Port(SPP), Enhanced

Parallel Port(EPP) & Enhanced Capability

Port(ECP)

l Parallel data transfer rate up to 1.5MB/Sec

l Supports 2 x 16550 Fast UART serial Ports

l Serial data transfer rate up to 115200bps

l Easy Plug and Play

l Automatically selects IRQ & I/O address

l Supports Windows® 2000, XP, Server 2003, Vista

Bus l PCI 2.1 32bit, 33MHz

Connectors l 2 x DB9 male serial connectors

l 1 x DB25 female parallel connector

Package Contents

l 1 x 2-Serial/1-Parallel Port PCIAdapter

l 1 x Bracket with two DB9 male serial ports

l 1 x Driver CD l 1 x User Manual

System Requirements

l Windows® 2000/XP/Server 2003/Vista

l Available PCI slot

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCI slot.

4. To install the card, carefully align the card’s bus connector with

the selected PCI slot on the motherboard. Push the board down

firmly.

5. Replace the slot bracket’s holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the board is installed before proceeding with driver

installation.

For Windows® 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes, then click

Next.

4. Insert the Driver CD, type in D:\PCI_IO\nm9xxx\2000, then

click OK. (Change D: to match your CD-ROM driver letter)

5. Click Next and Finish.

6. Restart Windows to complete the installation.

For Windows® XP

1. At the Found New Hardware Wizard, select Install from a list

or specific location (Advanced), then click Next.

2. Insert the Driver CD, check Include this location in the search,

uncheck the other box, type in D:\PCI_IO\nm9xxx\XP, then

click OK. (Change D: to match your CD-ROM drive letter)

3. If the Hardware Installation window pops up, click Continue

Anyway, then Finish. Our driver has been thoroughly tested for

stability and compatibility.

4. Repeat steps 1-3 three more times.

5. Restart Windows to complete the installation.

For Windows® Server 2003

1. At the Found New Hardware Wizard, select Install from a list

or specific location (Advanced), then click Next.

2. Insert the Driver CD, check Include this location in the search,

uncheck the other box, type in D:\PCI_IO\nm9xxx\2003, then

click OK. (Change D: to match your CD-ROM drive letter)

3. If the Hardware Installation window pops up, click Continue

Anyway, then Finish. Our driver has been thoroughly tested for

stability and compatibility.

4. Repeat steps 1-3 three more times.

5. Restart Windows to complete the installation.

For Windows® Vista

1. At the Found New Hardware Wizard, select Locate and install

driver software (recommended).

2. Click on I don’t have the disc. Show me other options.

3. Select the option Browse my computer for driver software

(advanced).

4. Insert the driver CD, check Include subfolders, type in

D:\PCI_IO\nm9xxx\Vista32, then click Next. (Change D: to

match your CD-ROM drive letter)

5. If the system prompts the user informing the drivers are not

signed, select the option Install this driver software anyway.

6. Click on Close to complete the driver installation.

To Verify Windows® Driver Installation

1. Right click My Computer, then click Manage. Click Device

Manager.

2. Click on the +(plus sign) in front of Ports(COM & LPT), two

MosChip PCI Serial Port … and one MosChip PCI Parallel

Port … should be displayed.

3. Double click Multifunction adapters, MosChip PCI Multi-I/O

Controller should be displayed.

Change COM Port Address

Some serial devices need a specific COM port in order to work. If your

serial devices works properly, do not change this settings.

For Windows® 2000/XP/Server 20003/Vista Installation

1. From the Device Manager window double click Ports(COM &

LPT), then double click the MosChip PCI Serial Port you want

to change.

2. Click Settings tab and click Advanced.

3. Click the down arrow that is next to the COM Port Number box,

select a COM port that is not in use, then click OK.

4. Click OK, then close Device Manager to save the changes.

Follow steps 1-4 again to change the other one serial port if

needed.

Change Parallel Port Address

Some parallel devices need a specific

parallel

port in order to work. If

your parallel devices works properly, do not change this settings.

For Windows® 2000/XP/Server 20003/Vista Installation

1. From the Device Manager window double click

Ports(COM &

LPT), then double click the MosChip PCI Parallel Port …

2. Click Port Settings tab.

3. At the LPT Port Number box, click the down arrow and select

an LPT port that is not in use.

4. Click OK, then close Device Manager to save the changes.

Inhaltsverzeichnis

Andere Digitus PCI-Karte Handbücher

Digitus

Digitus DS-30040-2 Bedienungsanleitung

Digitus

Digitus DS-33203-2 Bedienungsanleitung

Digitus

Digitus DS-33152 Bedienungsanleitung

Digitus

Digitus DS-33002-1 Bedienungsanleitung

Digitus

Digitus DS-33101-1 Bedienungsanleitung

Digitus

Digitus DS-30020-1 Bedienungsanleitung

Digitus

Digitus DN-7066 Bedienungsanleitung

Digitus

Digitus DS-30226 Bedienungsanleitung

Digitus

Digitus Gigabit Ethernet PCI Express Card Bedienungsanleitung

Digitus

Digitus DS-30225 Bedienungsanleitung

Digitus

Digitus USB 2.0, 4+1 Port PCI Add-On card Bedienungsanleitung

Digitus

Digitus DS-33103 Bedienungsanleitung

Digitus

Digitus DS-33160 Bedienungsanleitung

Digitus

Digitus DS-30040 Bedienungsanleitung

Digitus

Digitus DS-30201-2 Bedienungsanleitung

Digitus

Digitus DS-30223 Bedienungsanleitung

Digitus

Digitus 4-CHANNEL SATA II Bedienungsanleitung

Digitus

Digitus DS-33102-1 Bedienungsanleitung

Digitus

Digitus DS-30040-2 Bedienungsanleitung

Digitus

Digitus DS-33040-1 Bedienungsanleitung

Digitus

Digitus DN-10133 Bedienungsanleitung

Digitus

Digitus Serial ATA RAIDPCI Card Bedienungsanleitung

Digitus

Digitus DS-30201-4 Bedienungsanleitung

Digitus

Digitus DS-30221-1 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung