DMP Electronics 263EXT Bedienungsanleitung

DESCRIPTION

1INSTALL THE PANEL MODULE

Caution: Touch grounded metal to discharge static before handling the

panel.

1. Open the panel enclosure and remove all power from the panel.

2. Insert the stando provided with the cell modem into the

XT30/XT50 or XR150/XR550 Series panel stando hole.

3. Align the 263EXT stando hole with the stando already placed

in the panel. Secure the 263EXT on the 12-pin cell module

header. See Figures 3 and 4.

4. Place the module on the panel.

With the 263EXT Cellular

Extension Modules, you can now

maintain dB signal over

greater distances. The 263EXT

comes with two modules. The

panel module (see Figure 1) installs

directly on the panel inside the

enclosure while the remote module

(see Figure 2) installs with the cell

modem at the remote location that

provides the best signal.

The modules communicate with

each other through a wired

connection, maintaining dB

signal even from higher or lower

locations. Use CAT5 wire with

T568B Wiring to connect the

two modules. If using anything

other than CAT5 wire, it should

be 22AWG shielded wire with the

shield connected to the ground

terminal on both the panel side

module and the remote side

module. The 263EXT has a reach

of up to 300feet.

Compatibility

The 263EXT is compatible with

panels that have a 12-pin cell

module header, such as the

following panels:

• XT30/XT50 Series panels

• XR150/XR550 Series panels

What is Included

• 263EXT Panel Module

• 263EXT Remote Module

Stando and

Stando Hole

Back of the 263EXT

Figure 3: 263EXT Panel Module on an XT30/XT50 Panel

Figure 4: 263EXT Panel Module on an XR150/XR550 Panel

Back of the 263EXT

Stando and

Stando Hole

Figure 1: 263EXT Panel Module

Figure 2: 263EXT Remote Module

263EXT CELLULAR EXTENSION MODULES

Installation Guide

263EXT INSTALLATION GUIDE | LT-1848 18402 | DIGITAL MONITORING PRODUCTS

Designed, engineered,

and manufactured in

Springﬁeld, Missouri using U.S.

and global components.

INTRUSION • FIRE • ACCESS • NETWORKS

2500 North Partnership Boulevard

Springﬁeld, Missouri 65803-8877

888.436.7832 | DMP.com

LT-1848 1.01 18461

Brown

Brown/White

Green

Blue/White

Blue

Green/White

Orange

Orange/White

1 2 3 4 5 6

+12V

GND

3INSTALL THE REMOTE MODULE

1. Install the cellular communicator on the cell module

header.

2. Place the cellular antenna onto the SMA connector,

then twist the antenna until it is securely tightened

on to the remote module. See Figure6.

Brown

Brown/White

Green

Blue/White

Blue

Green/White

Orange

Orange/White

1 2 3 4 5 6

+12V

GND

4CONNECT THE CABLE

You can use either a CAT5 cable or two shielded 22/4 cables for this installation. This guide uses a CAT5 cable. If

using shielded 22/4, you must connect the shield to the ground on each end.

The remote module can be installed up to 300feet away from the control panel.

1. Connect one end of the CAT5 cable to the terminal on the panel module. See Figure7.

Caution: Observe polarity and make sure wires are installed straight through.

2. Connect the other end of the CAT5 cable to the terminal on the remote module. See Figure8.

3. Apply power to the system to turn it back on.

Figure 6: Connecting the Cellular Antenna

Figure 7: CAT5 Cable on 263EXT Panel Module

Figure 8: CAT5 Cable on 263EXT Remote Module

1 2 3 4 5 6

+12V

GND

Plastic Housing

Terminal

Cell Module

Header

Connect the cellular

communicator here

SMA Connector

Cellular

Antenna

2MOUNT THE REMOTE MODULE

Mount the remote module on a ﬂat surface.

1. Remove the circuit board from the plastic housing by

loosening the clips on one side and gently lifting it out of

the housing base.

2. Use the included screws in the desired mounting hole

locations to attach the remote module to the surface.

See the shaded mounting hole locations in Figure 5.

3. Reinstall the circuit board in the housing base.

Figure 5: Mounting Hole Locations

1 2 3 4 5 6

+12V

GND

Cellular

Communicator

Andere DMP Electronics Steuereinheit Handbücher

DMP Electronics

DMP Electronics 716 Bedienungsanleitung

DMP Electronics

DMP Electronics 734 Installationsanleitung

DMP Electronics

DMP Electronics 734INT Installationsanleitung

DMP Electronics

DMP Electronics 1134 Installationsanleitung

DMP Electronics

DMP Electronics 734 Bedienungsanleitung

DMP Electronics

DMP Electronics 893A Bedienungsanleitung

DMP Electronics

DMP Electronics 717 Bedienungsanleitung

DMP Electronics

DMP Electronics SCS-104 Bedienungsanleitung

DMP Electronics

DMP Electronics RoBoard RM-G212 Bedienungsanleitung

DMP Electronics

DMP Electronics 1116 Bedienungsanleitung

DMP Electronics

DMP Electronics 734B Installationsanleitung

DMP Electronics

DMP Electronics 893A Bedienungsanleitung

DMP Electronics

DMP Electronics 712-8 Bedienungsanleitung

DMP Electronics

DMP Electronics 734N Series Installationsanleitung

DMP Electronics

DMP Electronics 865 Bedienungsanleitung

DMP Electronics

DMP Electronics 714N-POE Installationsanleitung

DMP Electronics

DMP Electronics RoBoard RM-G146 Bedienungsanleitung

DMP Electronics

DMP Electronics 400 Bedienungs- und Wartungsanleitung

DMP Electronics

DMP Electronics 1134 Installationsanleitung

DMP Electronics

DMP Electronics RoBoard RM-G144 Bedienungsanleitung

DMP Electronics

DMP Electronics Wiegand 734N Bedienungsanleitung

DMP Electronics

DMP Electronics Wiegand 734N Installationsanleitung

DMP Electronics

DMP Electronics 400 Bedienungsanleitung

DMP Electronics

DMP Electronics 708 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung