Edelbrock 28385 Bedienungsanleitung

Brochure #63-28385Page 1

Catalog #28385

Rev. 7/08 - AJ/mc

EFI Victor Jr. 4.6L Intake Manifold

For 4.6L SOHC Ford V8

Catalog #28385

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and

procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,

it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:

1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation

will void your warranty and may result in poor performance and engine or vehicle damage.

DESCRIPTION: This intake manifold is designed to allow the use of aftermarket EFI on a Ford 4.6L Modular Single Overhead Cam engine. This will

eliminate the use of the OEM fuel injection system and is intended for longblocks that have been installed in early model or custom vehicles. A fuel

rail kit for this manifold is sold seperately as part #3639.

INSTALLATION PROCEDURE

KIT CONTENTS:

❑1 Victor Jr. Intake Manifold

❑1 Fitting; 3/8 NPT to 3/4” hose

❑1 Plug; 3/8 NPT

❑8 Bolt; M6 x 1.0 x 30mm hex flange head

NOTE:

This intake manifold is not designed for use in street driven vehicles equipped with the 4.6L engine. It is primarily intended to be used on race

cars that require air and fuel in excess of what the factory fuel injection system and manifold are capable of supplying. These installation instructions

do not attempt to cover the steps necessary to convert a vehicle to aftermarket fuel injection, they only cover what is needed to install this intake on

a properly prepared longblock.

MANIFOLD INSTALLATION:

1. Use only the recommended OEM intake gaskets with this manifold.

2. Fully clean the intake manifold and cylinder head flanges. No

sealants or adhesives are necessary.

3. Install the manifold on the block. Lightly coat the manifold bolts with

30W motor oil then gently thread them into the heads to hold the

intake in place. Do not apply any torque to the bolts at this time.

4. Install the themostat and allow it to drop into the machined recess.

The o-ring supplied with the thermostat should then be pressed in

and compressed by the thermostat housing.

5. The manifold bolts (including the thermostat housing bolts) can now

be tightened according to the torque sequence

(See Figure 1).

Figure 1 - Torque Sequence

Torque manifold bolts to 15-20 ft/lbs.

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech-Line: 1-800-416-8628 • E-Mail: [email protected]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock Nitrous Refill Station 78000 Bedienungsanleitung

Edelbrock

Edelbrock 6560 Bedienungsanleitung

Edelbrock

Edelbrock 5718 Bedienungsanleitung

Edelbrock

Edelbrock 70027 Bedienungsanleitung

Edelbrock

Edelbrock 68272 Bedienungsanleitung

Edelbrock

Edelbrock 5602 Bedienungsanleitung

Edelbrock

Edelbrock 2162 Gebrauchsanweisung

Edelbrock

Edelbrock 72950 Bedienungsanleitung

Edelbrock

Edelbrock Russell R08364 Bedienungsanleitung

Edelbrock

Edelbrock 73802 Bedienungsanleitung

Edelbrock

Edelbrock 29575 Bedienungsanleitung

Edelbrock

Edelbrock 3627 Bedienungsanleitung

Edelbrock

Edelbrock Performer 1403 Bedienungsanleitung

Edelbrock

Edelbrock Chevrolet Imapala 5.7L LT1 V8 Bedienungsanleitung

Edelbrock

Edelbrock Performer RPM Series Bedienungsanleitung

Edelbrock

Edelbrock Torker II 5021 Bedienungsanleitung

Edelbrock

Edelbrock 6566 Bedienungsanleitung

Edelbrock

Edelbrock Water Pump Gasket Kit 7522 Bedienungsanleitung

Edelbrock

Edelbrock 97383 Bedienungsanleitung

Edelbrock

Edelbrock Performer-Plus 2172 Bedienungsanleitung

Edelbrock

Edelbrock 10220275 Bedienungsanleitung

Edelbrock

Edelbrock 71920 Bedienungsanleitung

Edelbrock

Edelbrock 5721 Bedienungsanleitung

Edelbrock

Edelbrock 68732 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung