Elation DESIGN SPOT 575E Bedienungsanleitung

PROFESSIONAL MOVING HEAD USER’S MANUAL

DESIGN SPOT 575E

KEEP THIS MANUAL FOR FUTURE NEEDS

- 2 - V1.0 01NR

For your own safety, please read this user manual carefully before installing the device.

Keep thisdeviceaway from rain and moisture!

Unplug mainslead beforeopening thehousing.

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow carefully the instructions of this manual

INTRODUCTION:

Thank you for having chosen this professional moving head.

You will see you have acquired a powerful and versatile device.

Unpack the device. Inside the box you should find: the fixture device, a power cable, an

XLR connection cable, a safety cable and this manual. Please check carefully that there is no damage

caused by transportation. Should there be any, consult your dealer and don’t install this device.

Features

·Lamp: Philips MSR GOLD 575 SA/2 DE lamp

·Control signal: standard DMX-512,24 channels ( 16 bit) , 22channels ( 8 bit)

·Stand alone operation with master/slave function, can be sound activated

·Pan/tilt movement: 8 bit and 16 bit resolution

Forsmoothandpreciseresolution

Pan: 540°/630° optional, Tilt: 265°movement

High speed of pan/tilt movement, speed of pan/tilt movement is adjustable

Scanpositionmemory, auto reposition after unexpected movement

·CMY color mixture to get indefinite color effects

·Motorized color wheel with 7 colors, 1 UV filter plus open, rainbow-effect with adjustable speed in

both directions

·Preset color and gobo-macros

·Two gobo wheels with 6 rotating gobos plus open each, with different speed of gobo shaking

and rainbow effect, and gobo indexing

·The rotating prisms wheel can in both directions in different speed, with prism indexing

·Macro effect for rotating gobos, rotating prism combinations

·Animation flame effect

·Separetly stepless frost filter to achieve variable soft beam

·Motorized focus

- 3 - V1.0 01NR

·Motorized linear zoom from 16° ~ 30°

·Linear dimmer in precise speed from 0~100%

·Stepless iris , 5%~100% linear change iris, pulse iris effect

·Stepless frost, 0%~100% linear change frost

·Preset variable iris, dimmer, shutter, frost pulse effects

·Strobe effect with 1-10 flashes per second or random strobe via shutter

·Friendly colored LCD display

·Battery buffered Control Board for operation time readouts etc

·Local and remote lamp on/off

·Preset program: 8 built in programs can be called up via DMX controller

·Editable program: Edit and save the program to inside EEPROM via the control board or external

controller, up to 250 scenes can be saved and then can be run in Stand Alone or sound activated.

·Number of scenes in Program Run can be changed individually

SAFETY INSTRUCTIONS

CAUTION

Be very careful during installation. Since you will be working with a dangerous

voltage you can suffer a life-threatening electric shock when touching live wires.

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a

safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this user manual.

IMPORTANT

Damagescaused by thedisregard of this user manual are not subject to warranty.

Thedealer will not accept liabilityfor any resultingdefectsor problems.

If the device has been exposed to temperature changes due to environmental changes, do not switch it

on immediately. The arising condensation could damage the device. Leave the device switched off

until it has reached room temperature.

This device falls under protection-class I. Therefore it is essential that the device be earthed.

The electric connection must carry out by qualified person.

Make sure that the available voltage is not higher than stated at the end of this manual.

Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,

replacement of the cable must be done by an authorized dealer.

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the

power cord by the plug. Never pull out the plug by tugging the power cord.

- 4 - V1.0 01NR

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, it should decrease gradually.

CAUTION

Never touch the device during operation!

Thehousing may heat up

CAUTION

Never look directly into the light source,

as sensitive persons may suffer an epileptic shock.

Please be aware that damages caused by manual modifications to the device are not subject to warranty.

Keep away from children and non-professionals.

GENERAL GUIDELINES

This device is a lighting effect for professional use on stages, in discotheques, theatres, etc.

This fixture is only allowed to be operated with the max alternating current which stated in the

technical specifications in the last page of this manual, the device was designed for indoor use only.

Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure

that the device will serve you for a long time without defects. Do not shake the device. Avoid brute

force when installing or operating the device.

While choosing the installation-spot, please make sure that the device is not exposed to extreme heat,

moisture or dust. The minimum distance between light-output from the projector and the illuminated

surface must be more than 0,5 meter.

Always fix the fixture with an appropriate safety cable if you use the clamp to hang up the fixture.

When fixing the device on a raised-from-the- ground support, be sure to use no less than screws and

nuts of M10 x 25 mm and insert them in the pre-arranged screw holes in the base of the fixture.

If you use the quick lock cam in hanging up the fixture, please make sure the 4 quick lock fasteners

turned in the quick lock holes correctly.

Operate the device only after having familiarized with its functions. Do not permit operation by

- 5 - V1.0 01NR

persons not qualified for operating the device. Most damages are the result of unprofessional

operation.

Please use the original packaging if the device is to be transported.

For safety reasons, please be aware that all modifications on the device are forbidden.

If this device will be operated in any way different to the one described in this manual, the product may

suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to

short-circuit, burns, electric shock, lamp explosion, crash, etc.

INSTALLATION INSTRUCTIONS

a) Installing or replacing the lamp

Do not install lamps with a higher wattage. They generate higher temperatures than which the device

was designed for.

For the installation, you need one MSR GOLD 575 SA/2 DE lamp

Procedure :

1) Unscrew the 4 screws marked A, B, C and D on the back of the housing, holding the plate where the

lamp is underneath.

2) Gently pull the socket holder of the lamp housing in the middle.

3) Carefully insert the lamp into the socket. Please remember there is only one way to insert the lamp.

Gently slide the lamp and its lamp holder back into place and fasten the 4 screws.

4) On the access plate there are 3 small screws marked 1, 2 and 3. which are used to adjust the lamp

holder in the lamp housing. You can adjust the 3 screws to fine-turn the position of the lamp to get

the maximum light output as shown below.

Please remember the lamp is not a hot-restrike type, you must wait for approximately 10

minutes after having turned off the lamp before you can turn it back on again.

- 6 - V1.0 01NR

CAUTION

Do not operate this devicewith open cover

b) Mounting the device

CAUTION

Please consider the EN 60598-2-17 and the other respective national norms during the

installation. Theinstallation must only be carried out by aqualified person.

The installation of the effect has to be built and constructed in a way that it can hold 10 times the

weight for 1 hour without any harming deformation.

The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety

cable.

Never stand directly below the device when mounting, removing or servicing the fixture.

The operator has to make sure the safety relating and machine technical installations are approved by

an expert before taking the device into operation for the first time.

These installations have to be approved by a skilled person once a year.

CAUTION

Before taking into operation for the first time,

the installation has to beapproved by an expert.

Cautions:

The effect should be installed outside areas where persons may reach it, walk by or be seated.

CAUTION

When installing the device, makesure there is no highly

inflammable material within a distance of min. 0,5m

Overhead mounting requires extensive experience, including amongst others calculating working load

limits, installation material being used, and periodic safety inspection of all installation material and

the device. If you lack these qualifications, do not attempt the installation yourself. Improper

- 7 - V1.0 01NR

installation can result in bodily injury.

CAUTION

Theelectric connection must only becarried out by aqualified electrician.

Before mounting make sure that the installation area can hold a minimum point load of 10 times the

device’s weight.

Connect the fixture to the mains with the power plug

installation via the Omega holders

Screw one clamp each via a M12 screw and nut onto the Omega holders.

Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of the

device. Tighten the quick-lock fasteners fully clockwise. Install the second Omega holder.

Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a safe

fixation spot. Insert the end in the carabine and tighten the safety screw.

DMX-512 control connection

Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side

- 8 - V1.0 01NR

to the male 3-pin XLR input of the moving head. You can chain multiple

Moving head together through serial linking. The cable needed should be two core, screened cable

with XLR input and output connectors. Please refer to the diagram below.

321 3

output

Mounting sockat

Input

Mounting sockat

Input

Mounting sockat

output

Mounting sockat

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an electrically noisy

environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in

preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply

an XLR plug with a 120 Ωresistor connected between pins 2 and 3,which is then plugged into the

output XLR socket of the last fixture in the chain. Please see illustrations below.

Address49 Address25 Address1

Projector DMX start address selection

All fixtures should be given a DMX starting address when using a DMX signal, so that the correct

fixture responds to the correct control signals. This digital starting address is the channel number from

which the fixture starts to “listen” to the digital control information sent out from the DMX controller.

The allocation of this starting address is achieved by setting the correct number on the display located

on the base of the device.

- 9 - V1.0 01NR

You can set the same starting address for all fixtures or a group of fixtures, or make different address

for each fixture individually.

If you set the same address, all the units will start to “listen” to the same control signal from the same

channel number. In other words, changing the settings of one channel will affect all the fixtures

simultaneously.

If you set a different address, each unit will start to “listen” to the channel number you have set, based

on the quantity of control channels of the unit. That means changing the settings of one channel will

affect only the selected fixture.

In the case of the spot head, which is a 24 channel fixture, you should set the starting address of the first unit to 1, the

second unit to 25 (24 + 1), the third to 49 (25 + 24), and so on.

Control Board

The Control Board offers several features: you can simply set the starting address, switch on and off the lamp, run the

pre-programmed program or make a reset.

The main menu is accessed by pressing the Mode/esc-button until the display starts flashing. Browse through the

menu by pressing the Up-button or Down-button. Press the Enter-button in order to select the desired menu. You can

change the selection by pressing the Up-button or Down-button. Confirm every selection by pressing the

Enter-button. You can leave every mode by pressing the Mode/esc-button . The functions provided are described in

the following sections.

Function Mode

Set Dmx Address

Value Display

Set To Slave

Auto Program

Music Control

A001~AXXX

PAN Moving……

Slave1,Slave2,Slave3

Master / Alone

DMX address setting

DMX value display

Slave setting

Auto program

Music control

Time Information Current Time

Total Run Time

Total Lamp Time

Lamp Off Time

Clear Lamp Time

XXXX(Hours)

XXXX(Minute)

ON/OFF

Power on running time

Fixture running time

Lamp running time

Lamp off time

Clear lamp time

Temperature Info Base Temperature

Head Temperature

XX /

XXX/

Temperature on the display

board of the base

Temperature in the head

Information

Software Version Ver1.0 Software version of each IC

Lamp Control

Lamp On or Off

Automatic La-On

Lamp On Via DMX

Lamp Off Via DMX

Lamp Off No DMX

Lamp On at Temp.

Lamp Off at Temp.

ON/OFF

OFF, 0FF~19M

45C, 20~79/

130C, 80~139/

Lamp on/off

Lamp on/off when Power on

Lamp on via DMX

Lamp off via DMX

Lamp off if no DMX

Lamp restart at temp.

Lamp off at temp.

- 10 - V1.0 01NR

Status Settings Address via DMX

No DMX Status

Pan Reverse

Tilt Reverse

Fine Resolution

Pan Degree

Feedback

Movement Speed

Mic Sensitivity

ON/OFF

Auto/Music/Close/Hold

ON/OFF

630/540

ON/OFF

Speed 1~ 4

70%, 0~99%

Add. via DMX

Auto run if no DMX

Pan Reverse movement

Tilt Reverse movement

Fine resolution switch

Pan Degree Select

Scan Feedback switch

Scan Mode Select

Sensitivity of Mic.

Fans Control Auto Fans Speed

High Fans Speed

Fans Speed Mode Select

Temperature C/F Celsius

Fahrenheit

Temperature switch

between /

Initial Effect PAN

:PAN =XXX

Initial effect position

Personality

Reset Default ON/OFF Restore factory sett.

Reset Function

Reset All

Reset Pan&Tilt

Reset Colors

Reset Gobos

Reset Shutter

Reset Others

Reset all motors

Reset Pan/Tilt

Reset color wheel

Reset gobos

Reset shutter and/or dimmer

Reset other motors

Test Channel PAN …… Test function

Manual Control PAN

:PAN =XXX

Fine adjustment of the lamp

Effect Adjust

Calibrate Values --Password--

Color wheel

Password=XXX

Color wheel=XXX

Calbrate and adjust the

effects to standard/right

position Password “050”

User Mode XXXXXX(Band)

User Mode A

User Mode B

User Mode C

User’s mode to change

channel numbers

Users Mode Set

Edit User Mode PAN

PAN = CH01

Preset User modes

Select Programs Auto Pro Part 1

Auto Pro Part 2

Auto Pro Part 3

Program 1 ~ 10 Program 1

Program 1 ~ 10 Program 2

Program 1 ~ 10 Program 3

Select programs to be run

Edit Program Program 1

Program 10

Program Test

Step 01=SCxxx

Step 64=SCxxx

(“STEP XX”)

Testing program

Program in loop

Save and exit

Edit Scenes Edit Scene 001

~ Edit Scene 250

Pan,Tilt,……

--Secne Time--

Input By Outside

Pan=xxx……

TIME=xx.xs

Save and automatically

return

manual scenes edit

Edit Program

Rec. Controller XX~XX Automat. scenes rec

Andere Handbücher für DESIGN SPOT 575E

Inhaltsverzeichnis

Andere Elation Scheinwerfer Handbücher

Elation

Elation Event Brick W System Bedienungsanleitung

Elation

Elation DLED 12 BRICK Bedienungsanleitung

Elation

Elation PALADIN Bedienungsanleitung

Elation

Elation Professional SIXPAR 200IP Bedienungsanleitung

Elation

Elation ACL PAR 200 Bedienungsanleitung

Elation

Elation KLF832 Bedienungsanleitung

Elation

Elation Design LED 36MH Bedienungsanleitung

Elation

Elation Design LED 108IP Bedienungsanleitung

Elation

Elation ARENA PAR ZOOM Bedienungsanleitung

Elation

Elation Opti 30 RGB Bedienungsanleitung

Elation

Elation DESIGN PROMO 360 Bedienungsanleitung

Elation

Elation DESIGN SPOT 575E Bedienungsanleitung

Elation

Elation CMY Zoom 250 Bedienungsanleitung

Elation

Elation ARENA ZOOM Q7IP Bedienungsanleitung

Elation

Elation Arena Par CW Bedienungsanleitung

Elation

Elation Proteus Brutus Bedienungsanleitung

Elation

Elation ELAR EXFLOOD Bedienungsanleitung

Elation

Elation ACL 360 MATRIX Bedienungsanleitung

Elation

Elation TVL2000 II Bedienungsanleitung

Elation

Elation ELED DW PAR56 Bedienungsanleitung

Elation

Elation VOLT Q5E SIX PACK Bedienungsanleitung

Elation

Elation POWER SPOT 700CMY II Bedienungsanleitung

Elation

Elation WW PROFILE Bedienungsanleitung

Elation

Elation CUEPIX BLINDER WW2 Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung